共找到 149 条与 冶金原料与辅助材料综合 相关的标准,共 10 页
本标准规定了混铁炉用耐火浇注料的分类、技术要求,试验方法,质量评定程序,包装,标志.运输、儲 存及质量证明书等。 本标准适用于混铁炉工作衬用耐火浇注料。
Refractory castable for mixed iron furnace
이 표준은 연강, 인장강도 490 N/mm2급, 540 N/mm2급 및 590 N/mm2급
Flux cored wires for gas shielded and self-shielded metal arc welding of mild steel, high strength steel and low temperature service steel
本标准规定了以丙烯酸树脂为基的铝合金建筑型材用阳极电泳涂料的要求、试验方法、检验规则、标志、包装、运输、贮存及质量证明书与合同(或订货单)内容。 本标准适用于以丙烯酸树脂为基的铝合金建筑型材用阳极电泳涂料。
Acrilic eletrodeposition paint for aluminium alloy extruded profiles for architecture
本标准规定了铝用炭素材料粉料布莱因细度的试验方法。 本标准适用于粒径<0.2mm的炭素材料布莱因细度的测定。
Carbon materials used for aluminium production-Testing method for dust Blaine fineness
本标准规定了炭胶泥中灰分含量的测定方法。 本标准适用于炭胶泥中灰分含量的测定。
Determination of the ash content in carbon glue used for aluminium production
本标准规定了炭胶泥中挥发分的测定方法。 本标准适用于炭胶泥中挥发分的测定。
Determination of the volatile matter content in carbon glue used for aluminium production
本标准规定了烧结球团安全生产的技术要求。 本标准适用于烧结球团厂(或车间)的设计、设备制造、施工安装、验收以及生产和检修。
Safety regulations for sintering and palletizing
YS/T 667的本部分规定了填料用氢氧化铝及拟薄水铝石中砷、汞、铅含量的测定方法。 本部分适用于填料用氢氧化铝及拟薄水铝石中砷、汞、铅的测定。测定范围:砷5×10%-5×10%、汞1×10%-5×10%、铅5×10%-5×10%。
The testing methods for chemical alumina.Part 2:Determining concentration of arsenic,mercury and lead in aluminum hydroxide for filler and pseudo boehmite by HG-ICP-AES
本标准规定了石灰石中CaO、MgO、SiO含量的测定方法。 本标准适用于灰石中CaO、MgO、SiO含量的测定。
Determination of calcium oxide,magnesium oxide, silicon oxide content of Limestone by X-ray fluorescence spectrometric method
本标准规定了氢氧化铝中SiO、FeO、NaO含量的测定方法。 本标准适用于氢氧化铝中SiO、FeO、NaO含量的测定。
Determination of silicon oxide,Iron oxide,Sodium oxide content of Aluminum Hydroxide by X-ray fluorescence spectrometric method
YS/T 667的本部分规定了4A沸石中镉、铬、钒含量的测定方法。 本部分适用于4A沸石中镉、铬、钒的测定。测定范围:镉1×10%-5×10%、铬5×10%-5×10%、钒5×10%-5×10%。
The testing methods for chemical alumina.Part 3:Determining concentration of cadmium,chromium and vanadium in 4A zeolite by ICP-AES
本标准规定了填料用氢氧化铝电导率的测定方法。 本标准适用于填料用氢氧化铝电导率的测定。测定范围:>5μS/cm。
Analysis methods of aluminum hydroxide for filler conductance.Determination of electrical conductivity
本标准规定了填料用氢氧化铝色度的测定方法。 本标准适用于填料用氢氧化铝色度的测定。测定范围:L*:80.00~99.99;a*:-0.50~0.50;b*:-0.20~1.30。
Analysis methods of aluminum hydroxide for filler conductance.Determination of chrominance
YS/T 667的本部分规定了4A沸石中砷、汞含量的测定方法。 本部分适用于4A沸石中砷、汞的测定。测定范围:砷5×10%-5×10%、汞1×10%-5×10%。
The testing methods for chemical alumina.Part 4:Determining concentration of arsenic and mercury in 4A zeolite by HG-ICP-AES
이 표준은 알루미늄 및 알루미늄 합금의 전신재의 소지에 방식ㆍ미관 등의 목적으로 처리한 유
Combined coatings of anodic oxide and organic coatings on aluminium and aluminium alloys
이 표준은 볼트, 너트, 리벳, 작은 나사, 태핑 나사 등의 나사류 및 각종 부품을 냉간
Boron steels for cold heading-Part 2:Wires
本部分规定了填料用氢氧化铝及拟薄水铝石中镉、铬、钒含量的测定方法。 本部分适用于填料用氢氧化铝及拟薄水铝石中镉、铬、钒含量的测定。测定范围:镉 5×10%~5×10;铬 3×10%~5×10;钒 3×10%~5×10。
The testing methods for chemical alumina.Part 1: Determination of cadmium, chromium and vanadium in aluminum hydroxide for filler and pseudo boehmite by ICP-AES
本标准规定了铝合金建筑型材用粉末涂料的要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于铝合金建筑型材静电喷涂用热固性粉末涂料(以下简称粉末)。
Powder for coating profiles of aluminium alloy for architecture
本部分规定了冰晶石中氟、铝、钠、硅、铁、硫、磷、钙含量(F、Al、Na、SiO、FeO、SO、PO、CaO表示)的测定方法。 本部分适用于冰晶石中氟、铝、钠、硅、铁、硫、磷、钙含量的测定。测定范围见表 1 。
Chemical analysis methods and determination of physical performance of synthetic cryolite.Part 14: X-ray fluorescence spectrometric method for the determination of elements content
本部分规定了氟化铝中氟、铝、钠、硅、铁、硫、磷含量(以F、Al、Na、SiO、FeO、SO、PO表示)的测定方法。 本部分适用于氟化铝中氟、铝、钠、硅、铁、硫、磷含量的测定。测定范围见表1。
Chemical analysis methods and determination of physical performance of industrial aluminium fluoride.Part 16: X-ray fluorescence spectrometric method for the determination of elements content
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号