H48 钢管、铸铁管 标准查询与下载

BS EN 10305-3:2016 用于精密应用的钢管 技术交付条件 焊接冷定径管

Steel tubes for precision applications. Technical delivery conditions. Welded cold sized tubes

BS EN 10305-6:2016 用于精密应用的钢管 技术交付条件 用于液压和气动动力系统的焊接冷拔管

Steel tubes for precision applications. Technical delivery conditions. Welded cold drawn tubes for hydraulic and pneumatic power systems

BS EN 10305-2:2016 用于精密应用的钢管 技术交付条件 焊接冷拔管

Steel tubes for precision applications. Technical delivery conditions. Welded cold drawn tubes

JIS G 3474 AMD 1:2016 钢塔用高拉伸强度钢管(修改件1)

High strength steel tubes for steel tower (Amendment 1)

JIS G 3469 AMD 2:2016 聚乙烯涂层钢管(修改件2)

Polyethylene coated steel pipes (Amendment 2)

JIS G 3475 AMD 1:2016 建筑结构用碳素钢管(修改件1)

Carbon steel tubes for building structure (Amendment 1)

JIS G 3457:2016 电弧焊碳素钢管

Arc welded carbon steel pipes

JIS G 3455:2016 高压设备用碳素钢管

Carbon steel pipes for high pressure service

JIS G 3445:2016 机械结构用碳素钢管

Carbon steel tubes for machine structure

NB/T 20006.33-2016 压水堆核电厂用合金钢 第33部分：蒸汽发生器用10Cr1Mo钢管

Alloy steel for pressurized water reactor nuclear power plants Part 33: 10Cr1Mo steel pipes for steam generators

NB/T 20006.34-2016 压水堆核电厂用合金钢 第34部分：蒸汽发生器用10Gr1Mo管配件

本部分规定了压水堆核电厂蒸汽发生器用10Cr1Mo无缝管配件的制造、检验和验收等要求。 本部分适用于压水堆核电厂蒸汽发生器用10Cr1Mo无缝管配件。

Alloy steel for pressurized water reactor power plant.Part 34: 10Cr1Mo pipe fitting for steam generator

NB/T 20007.44-2016 压水堆核电厂用不锈钢 第44部分：反应堆冷却剂波动管用015Cr17Ni12Mo2N奥氏体不锈钢管

本部分规定了压水堆核电厂反应堆冷却剂波动管用奥氏体不锈钢管的制造、检验和验收等要求。 本部分适用于压水堆核电厂反应堆冷却剂波动管用015Cr17Ni12Mo2N奥氏体不锈钢管。

Stainless steel for pressurized water reactor nuclear power plants.Part 44: 015Cr17Ni12Mo2N austenitic stainless steel pipes for surge line pipe spool pieces

ASTM A790/A790M-16 无缝和焊接铁素体/奥氏体不锈钢管的标准规格

1.1 This specification2 covers seamless and straight-seam welded ferritic/austenitic steel pipe intended for general corrosive service, with particular emphasis on resistance to stress corrosion cracking. These steels are susceptible to embrittlement if used for prolonged periods at elevated temperatures. 1.2 Optional supplementary requirements are provided for pipe when a greater degree of testing is desired. These supplementary requirements call for additional tests to be made and, when desired, one or more of these may be specified in the order. 1.3 Appendix X1 of this specification lists the dimensions of welded and seamless stainless steel pipe as shown in ANSI B36.19. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the M designation of this specification is specified in the order. Note 1: The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as nominal diameter, size, and nominal size.

Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

ASTM A803/A803M-16 无缝和焊接铁素体不锈钢给水加热器管件的标准规格

1.1 This specification covers seamless and welded ferritic stainless steel feedwater heater tubes including those bent, if specified, into the form of U-tubes for application in tubular feedwater heaters. 1.2 The tubing sizes covered shall be 5/8 to 1 in. [15.9 to 25.4 mm] inclusive outside diameter, and average or minimum wall thicknesses of 0.028 in. [0.7 mm] and heavier. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes

GOST R ISO 10893-3-2016 无缝和焊接钢管. 第3部分. 铁磁性管纵向和/或横向缺陷检测用自动化全周边漏磁试验

Seamless and welded steel tubes. Part 3. Automated full peripheral flux leakage testing of ferromagnetic tubes for the detection of longitudinal and/or transverse imperfections

GOST R 54864-2016 用于焊接钢结构的热变形无缝钢管. 规格

Hot-deformed seamless steel pipes for the welded steel structures. Specifications

ASTM A554-16 焊接不锈钢机械管件的标准规格

1.1 This specification covers welded austenitic, ferritic, and austenitic-ferritic duplex stainless steel mechanical tubing intended for use in ornamental, structural, exhaust, and other applications where appearance, mechanical properties, or corrosion resistance is needed. The grades covered are listed in Table 1. (A) Maximum, unless a range or minimum is indicated. Where ellipses (...) appear in this table, there is no minimum and analysis for the element need not be determined or reported.(B) For small diameter or thin walls, or both, where many drawing passes are required, a carbon content of 0.0408201;% max is necessary in grades MT-304L and MT-316L. Small outside diameter tubes are defined as those less than 0.500 in. (12.7 mm) in outside diameter and light wall tubes as those less than 0.049 in. (1.24 mm) in average wall thickness.(C) The columbium content shall be not less than ten times the carbon content and not more than 1.008201;%.(D) The titanium content shall be not less than five times the carbon content and not more than 0.608201;%.(E) S40900 (Type 409) has been replaced by S40910, S40920, and S40930. Unless otherwise specified in the ordering information, an order specifying S40900 or Type 409, shall be satisfied by any one of S40910, S40920, or S40930 at the option of the seller. Material meeting the requirements of S40910, S40920, or S40930 may, by agreement between purchaser and manufacturer, be certified as S40900.(F) S41003 chemical composition relates to Type 412, which is not currently an AISI or SAE number.(G) S44100 chemical composition relates to Type 441, which is not currently an AISI or SAE number.(H) % Cr + 3.3 × %Mo + 16 × %N = 41 min.(I) % Cr + 3.3 × %Mo + 16 × %N = 40 min.(J) Designation established in accordance with Practice E527 and SAE J 1086.(K) Common name, not a trademark, widely used, not associated with any one producer. 1.2 This specification covers as-welded or cold-reduced mechanical tubing in sizes to 16 in. (406.4 mm) outside dimension, and in wall thicknesses 0.020 in. (0.51 mm) and over.

Standard Specification for Welded Stainless Steel Mechanical Tubing

ASTM A312/A312M-16 无缝, 焊接和深冷工况奥氏体不锈钢管的标准规格

1.1 This specification2 covers seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service. Note 1: When the impact test criterion for a low-temperature service would be 15 ft·lbf [20 J] energy absorption or 15 mils [0.38 mm] lateral expansion, some of the austenitic stainless steel grades covered by this specification are accepted by certain pressure vessel or piping codes without the necessity of making the actual test. For example, Grades TP304, TP304L, and TP347 are accepted by the ASME Pressure Vessel Code, Section VIII Division 1, and by the Chemical Plant and Refinery Piping Code, ANSI B31.3, for service at temperatures as low as −425 °F [−250 °C] without qualification by impact tests. Other AISI stainless steel grades are usually accepted for service temperatures as low as −325 °F [−200 °C] without impact testing. Impact testing may, under certain circumstances, be required. For example, materials with chromium or nickel content outside the AISI ranges, and for material with carbon content exceeding 0.10 %, are required to be impact tested under the rules of ASME Section VIII Division 1 when service temperatures are lower than −50 °F [−45 °C]. 1.2 Grades TP304H, TP309H, TP309HCb, TP310H, TP310HCb, TP316H, TP321H, TP347H, and TP348H are modifications of Grades TP304, TP309Cb, TP309S, TP310Cb, TP310S, TP316, TP321, TP347, and TP348, and are intended for service at temperatures where creep and stress rupture properties are important. 1.3 Optional supplementary requirements are provided for pipe where a greater degree of testing is desired. These supplementary requirements call for additional tests to be made and, when desired, it is permitted to specify in the order one or more of these supplementary requirements. 1.4 Table X1.1 lists the standardized dimensions of welded and seamless stainless steel pipe as shown in ANSI B36.19. These dimensions are also applicable to heavily cold worked pipe. Pipe having other dimensions is permitted to be ordered and furnished provided such pipe complies with all other requirements of this specification. 1.5 Grades TP321 and TP321H have lower strength requirements for pipe manufactured by the seamless process in nominal wall thicknesses greater than 3/8 in. [9.5 mm]. 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. Note 2:x00......

Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

ASTM A312/A312M-16a 无缝和焊接奥氏体不锈钢管标准规范

1.1 This specification2 covers seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service. Note 1: When the impact test criterion for a low-temperature service would be 15 ft·lbf [20 J] energy absorption or 15 mils [0.38 mm] lateral expansion, some of the austenitic stainless steel grades covered by this specification are accepted by certain pressure vessel or piping codes without the necessity of making the actual test. For example, Grades TP304, TP304L, and TP347 are accepted by the ASME Pressure Vessel Code, Section VIII Division 1, and by the Chemical Plant and Refinery Piping Code, ANSI B31.3, for service at temperatures as low as −425 °F [−250 °C] without qualification by impact tests. Other AISI stainless steel grades are usually accepted for service temperatures as low as −325 °F [−200 °C] without impact testing. Impact testing may, under certain circumstances, be required. For example, materials with chromium or nickel content outside the AISI ranges, and for material with carbon content exceeding 0.10 %, are required to be impact tested under the rules of ASME Section VIII Division 1 when service temperatures are lower than −50 °F [−45 °C]. 1.2 Grades TP304H, TP309H, TP309HCb, TP310H, TP310HCb, TP316H, TP321H, TP347H, and TP348H are modifications of Grades TP304, TP309Cb, TP309S, TP310Cb, TP310S, TP316, TP321, TP347, and TP348, and are intended for service at temperatures where creep and stress rupture properties are important. 1.3 Optional supplementary requirements are provided for pipe where a greater degree of testing is desired. These supplementary requirements call for additional tests to be made and, when desired, it is permitted to specify in the order one or more of these supplementary requirements. 1.4 Table X1.1 lists the standardized dimensions of welded and seamless stainless steel pipe as shown in ANSI B36.19. These dimensions are also applicable to heavily cold worked pipe. Pipe having other dimensions is permitted to be ordered and furnished provided such pipe complies with all other requirements of this specification. 1.5 Grades TP321 and TP321H have lower strength requirements for pipe manufactured by the seamless process in nominal wall thicknesses greater than 3/8 in. [9.5 mm]. 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. Note 2:x00......

Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

GOST R ISO 10893-6-2016 无缝和焊接钢管. 第6部分. 焊缝缺陷检测用放射线试验

Seamless and welded steel tubes. Part 6. Radiographic testing for the detection of imperfections of the weld seam