H48 钢管、铸铁管 标准查询与下载

DIN EN ISO 3183:2018 石油和天然气工业.管道运输系统用钢管(ISO 3183-2012+Amd 1-2017); 德文版本EN ISO 3183-2012+A1-2018

This document specifies requirements for seamless and welded steel pipes of two product specification levels (PSL 1 and PSL 2) for use in pipeline transportation systems in the petroleum and natural gas industries

Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO 3183:2012 + Amd 1:2017); German version EN ISO 3183:2012 + A1:2018

YB/T 4652-2018 管道用球墨铸铁修补器

Ductile iron patcher for pipes

NB/T 20005.41-2018 压水堆核电厂用碳钢和低合金钢 第41部分：安全级设备用低合金钢管

Carbon steel and low alloy steel for pressurized water reactor nuclear power plants Part 41: Low alloy steel pipes for safety grade equipment

JIS G 3464:2018 低温设备用热交换器钢管

Steel heat exchanger tubes for low temperature service

JIS G 3477-2:2018 聚乙烯涂层钢管.第2部分:外部发泡聚乙烯涂层钢管

Polyethylene coated steel pipes -- Part 2: External extruded polyethylene coated steel pipes

JIS G 3429:2018 高压气瓶用无缝钢管

Seamless steel tubes for high pressure gas cylinders

JIS G 3458:2018 合金钢管

Alloy steel pipes

JIS G 3460:2018 低温设备用钢管

Steel pipes for low temperature service

JIS G 3472:2018 机动车用电阻焊碳钢管

Electric resistance welded carbon steel tubes for automobile

JIS G 3473:2018 汽缸筒用碳钢管

Carbon steel tubes for cylinder barrels

NF A48-490*NF ISO 9349:2018 球墨铸铁管、配件、附件及其接头. 热预绝缘产品

Ductile iron pipes, fittings, accessories and their joints - Thermal preinsulated products

ASTM A999/A999M-18 合金和不锈钢管通用要求的标准规范

1.1 This specification2 covers a group of general requirements that, unless otherwise specified in an individual specification, shall apply to the ASTM product specifications noted below. 1.2 In the case of conflict between a requirement of a product specification and a requirement of this specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this specification and a more stringent requirement of the purchase order, the purchase order shall prevail. Title of Specification ASTM Desig- nation3     Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes A312/A312M Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness A333/A333M Seamless Ferritic Alloy-Steel Pipe for High Temperature Service A335/A335M Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications A358/A358M Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service A369/A369M Seamless Austenitic Steel Pipe for High-Temperature Service A376/A376M Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service A409/A409M

Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

ASTM A790/A790M-18 无缝焊接铁素体/奥氏体不锈钢管的标准规格

1.1 This specification2 covers seamless and straight-seam welded ferritic/austenitic steel pipe intended for general corrosive service, with particular emphasis on resistance to stress corrosion cracking. These steels are susceptible to embrittlement if used for prolonged periods at elevated temperatures. 1.2 Optional supplementary requirements are provided for pipe when a greater degree of testing is desired. These supplementary requirements call for additional tests to be made and, when desired, one or more of these may be specified in the order. 1.3 Appendix X1 of this specification lists the dimensions of welded and seamless stainless steel pipe as shown in ANSI B36.19. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the M designation of this specification is specified in the order. Note 1: The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as nominal diameter, size, and nominal size. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

ASTM A335/A335M-18 高温设备用无缝铁素体合金钢管标准规范

1.1 This specification2 covers nominal wall and minimum wall seamless ferritic alloy-steel pipe intended for high-temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Selection will depend upon design, service conditions, mechanical properties, and high-temperature characteristics. 1.2 Several grades of ferritic steels (see Note 1) are covered. Their compositions are given in Table 1. Note 1: Ferritic steels in this specification are defined as low- and intermediate-alloy steels containing up to and including 108201;% chromium. (A) New designation established in accordance with Practice E527 and SAE J1086, Practice for Numbering Metals and Alloys (UNS).(B) Grade P5c shall have a titanium content of not less than 4 times the carbon content and not more than 0.708201;%; or a columbium content of 8 to 10 times the carbon content.(C) Alternatively, in lieu of this ratio minimum, the material shall have a minimum hardness of 275 HV in the hardened condition, defined as after austenitizing and cooling to room temperature but prior to tempering. Hardness testing shall be performed at mid-thickness of the product. Hardness test frequency shall be two samples of product per heat treatment lot and the hardness testing results shall be reported on the material test report.(D) Applies to both heat and product analyses. 1.3 Supplementary requirements (S1 to S8) of an optional nature are provided. Supplementary requirements S1 through S6 call for additional tests to be made, and when desired, shall be so stated in the order together with the number of such tests required. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. Note 2: The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.”

Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

ASTM A1109-18 卫生、废物和通风管道用单层无轮毂铸铁土壤管件专用规范

1.1 This specification covers special hubless cast iron soil pipe fittings for use in a one-pipe combination vent and waste stack unvented for gravity flow applications. It establishes standards covering material, manufacture, mechanical and chemical properties, dimensions, coating, test methods, inspection, certification, and product marking for hubless cast iron soil pipe fittings. These fittings are intended for nonpressure applications, where the selection of the proper size for sanitary, drain, and waste systems allows free air space for gravity drainage. Note 1: The fittings covered by this standard are special fittings intended to be used for engineered designed systems and will require special approval by the authority having jurisdiction for use. It is not the intent of this standard to endorse or recommend the use of these fittings for these special applications. 1.2 The EDP/ASA numbers indicated in this section represent a uniform industry code adopted by the American Supply Association (ASA). A group designation prefix, 022, is assigned to hubless products, followed by the four-digit identification assigned to individual items and a check digit. This system has been instituted to facilitate EDP control through distribution channels, and is to be used universally in ordering and specifying product items. Those items with no EDP numbers are new, special, or transitory, and will be assigned numbers on subsequent prints of this specification. 1.3 This specification covers fittings of the following patterns and applies to any other patterns that conform with the applicable requirements given in this specification. Note 2: The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. Note 3: Some sellers of these fittings use the terms “aerator” and “de-aerator” fittings to describe the two types of fittings covered by this standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications

YB/T 4513-2017 医用气体和真空用不锈钢焊接钢管

Stainless steel welded steel pipes for medical gases and vacuums

YB/T 176-2017 陶瓷内衬复合钢管

Ceramic lined composite steel pipe

ISO 3183:2012/Amd 1:2017 石油和天然气工业.运输系统管道用钢管.修改件1

Petroleum and natural gas industries - Steel pipe for pipeline transportation systems; Amendment 1

JIS G 3459 AMD 1:2017 不锈钢钢管(修改件1)

Stainless steel pipes (Amendment 1)

JIS G 3468 AMD 1:2017 大口径焊接不锈钢管(修改件1)

Large diameter welded stainless steel pipes (Amendment 1)