共找到 306 条与 结构要素 相关的标准,共 21 页
SCREWS COVERED BY THE DASH NUMBERS GIVEN IN MS51034 AND MS51036 ARE CANCELLED AFTER 29 JANUARY 1964 AND SUPERSEDED BY THE SCREWS COVERED ON MS51973 HAVING THE SAME DASH NUMBERS. CANCELLED SCREWS MAY BE USED UNTIL EXISTING STOCKS ARE DEPLETED. USE ONLY MS51973 SCREWS FOR NEW DESIGN.
Setscrew - Hexagon Socket, Cone Point, Alloy Steel, Cadmium Plated, UNC-3A, Plain and Self-Locking
NASM51966, "SETSCREW - HEXAGON SOCKET, FLAT POINT, ALLOY STEEL, CADMIUM PLATED, UNF-3AI PLAIN AND SELF-LOCKING", was adopted on 27 OCTOBER 1999 for use by the Department of Defense (DoD). Proposed changes by DoD Activities must be submitted to the DoD Adopting Activity: Defense Supply Center . Philadelphia, ATTN: DSCP-ILEA, 700 Robbins Avenue, Philadelphia, PA 19111- 5096. DoD Activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC., 1250 EYE STREET, N. W., WASHINGTON, DC 20005-3924.
Setscrew - Hexagon Socket, Flat Point, Alloy Steel, Cadmium Plated, UNF-3A, Plain and Self-Locking
Clip, Double Slot, Spring Tension FSC 5340
Clip, Double Slot, Spring Tension
DASH NUHBER DESIGNATES MXIMUH GRIP I N .O625 INCREMEKTS. AO0 "V" AFTER BASIC PART NUHBER FOR 6AL-4V TITANIUM ALLOY. ADD "H" AFTER BASIC NUHBER WHEN SEALANT ESUPE GROOVE IS REWIRED.
Spacer, Sleeve-Rivet, High Temperature, Non Magnetic Rev.6
This standard provides specifications, formulas, and tables relating to Acme screw threads.
Acme Screw Threads
Establishes the basic triangular profile for the MJ thread form; provides a system of designations; lists the standard series of diametedpitch combinations for diameters from 1.6 to 200 mm; and specifieslimiting dimensions and tolerances.It specifies the characteristics of the MJ metric series of threads having a minimum 0.1501 1P radius at theroot of the external thread, and also having the minor diameter of the external and internal threads increased above the ASME B 1.13M thread form to accommodate the external thread root radius.
Metric Screw Threads – MJ Profile
Establishes general principles for describing the structure of information about systems and the systems themselves.
Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Basic rules
1.1 .I This Standard covers requirements for squareand rectangular parallel keys and keyways intended forboth alignment of shafts and hubs, and transmittingtorque between shafts and hubs.1.1.2 Keys covered by this Standard have a relativelytight width tolerance. The deviations are less than thebasic size. Keys with greater width tolerance and withdeviations greater than the basic size are covered byASME B18.25.3M.1.1.3 The inclusion of dimensional data in thisStandard is not intended to imply that all sizes describedare production stock items. Consumers should consultwith suppliers concerning lists of stock items.
Square and Rectangular Keys and Keyways
1 .I .I This Standard covers requirements for metricWoodruff keys and keyways intended for both alignmentof shafts and hubs, and transmitting torque betweenshafts and hubs.1.1.2 The inclusion of dimensional data in thisStandard is not intended to imply that all sizes describedare production stock items. Consumers should consultwith suppliers concerning lists of stock items.
Woodruff Keys and Keyways
Provides all users with the capability to identify externally threaded fastener products by a preselected order of coding.
Part identifying number (pin) code system standard for B18 externally threaded products
Thread connection components with brace rod outside diameter no less thanΦ23
Thread connection components with brace rod outside diameter ranging fromΦ14 to Φ22
Welded steel brace rod thread connection components
Included in the standard are reamer design parameters, pertinent nomenclature and reamer geometries, suggested areas of application, acceptable reamer materials and hardness requirements, and a Glossary of Terms defining relative terminology. Reamers covered by this specification include Right Hand Cut only to the following
Reamers, Chucking 0.0469 Inch Thru 1.5000 Inches (Rev. 1)
本标准规定了钢丝螺套用内螺纹的基本牙型、公差带位置、基本尺寸与偏差。 本标准适用于安装钢丝螺套。
Internal thread used for installation of steel wire turnbuckles
POR USAOE REQUIREEMS REPER To SPECIPICATION NAS 810.
Insert, Screw Thread Key Locked, A286 Cres Heavy Duty, Metric (Rev. 1)
"L" designates the length of the tube in inches and decimls of an inch.
Insert, Screw Thread Key Locked, A286 Cres Lightweight, Metric (Rev. 1)
This standard provides a method for the packaging of items requiring preservatives and protection from contamination or surface scratching.
Insert, Screw Thread Key Locked, A286 Cres Miniature, Metric (Rev. 1)
ALL CELLS SHALL VEHT TO A COUMON MANIFOLD WHICH WILL BE EQUIPPED WITH NIPPLE SIMILAR TO HOSE CONNECTION ANDl0058-4.
Insert, Screw Thread Key Locked, Alloy Steel, Lightweight, Metric (Rev. 1)
FIRST DASH NUkBER INDICATES JOOR THIGiKPESS (DI'*. A). SECOND DASH NU:SBER INDICATES PANEL OR FRAILE THICKNESS (DIM. B).
Insert, Screw Thread Key Locked, Alloy Steel, Heavy Duty, Metric (Rev. 1)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号