J11 滚动轴承 标准查询与下载
共找到 1481 条与 滚动轴承 相关的标准，共 99 页
Rolling bearing automotive wheel hub bearing unit testing and evaluation methods
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-11-07
- 实施
- 2018-04-01
Rolling bearings for elevator traction machines
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-11-07
- 实施
- 2018-04-01
Rolling bearing automotive wheel hub bearing unit
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-11-07
- 实施
- 2018-04-01
Rolling bearings and bearings for automotive shock absorbers and their units
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-11-07
- 实施
- 2018-04-01
本标准规定了转盘轴承的结构型式、代号方法、外形尺寸、测量方法、检验规则、标志、包装等技术要求。 本标准适用于转盘轴承的生产检验和用户验收。
Rolling bearings-Slewing bearings
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-11-07
- 实施
- 2018-04-01
Rolling bearings. Measuring methods for vibration. Radial cylindrical roller bearings with cylindrical bore and outside surface
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-09-19
- 实施
- 2017-09-30
Rolling bearings. Measuring methods for vibration. Radial spherical and tapered roller bearings with cylindrical bore and outside surface
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-09-19
- 实施
- 2017-09-30
This part of ISO 15242 specifies vibration measuring methods for single-row and double-row radial ball bearings, with a contact angle up to and including 45°. It covers radial ball bearings with cylindrical bore and outside surface, except bearings with filling slots and three- and four-point-contact ball bearings.
Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface (ISO 15242-2:2015); Text in German and English
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-09-00
- 实施
This part of ISO 15242 specifies measuring methods for vibration of rolling bearings under established measuring conditions, togehter with calibration of the related measuring systems.
Rolling bearings - Measuring methods for vibration - Part 1: Fundamentals (ISO 15242-1:2015); Text in German and English
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-09-00
- 实施
This document specifies vibration measuring methods for single-row and double-row radial cylindrical roller bearings with cylindrical bore and outside surface, under established measurement conditions.
Rolling bearings - Measuring methods for vibration - Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-08-00
- 实施
This document specifies preferred boundary dimensions for radial bearings of the diameter series 7, 8, 9, 0, 1, 2, 3 and 4.
Rolling bearings - Radial bearings - Boundary dimensions, general plan
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-07-01
- 实施
Rolling bearings. Damage and failures. Terms, characteristics and causes
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-05-11
- 实施
- 2017-05-11
Plain bearings. Quality assurance of thin-walled half bearings. Selective assembly of bearings to achieve a narrow clearance range
- ICS
- 21.100.10
- CCS
- J11
- 发布
- 2017-04-25
- 实施
- 2017-04-25
This document classifies different modes of failure occurring in service for rolling bearings made of standard bearing steels. For each failure mode, it defines and describes the characteristics, appearance and possible root causes of failure. It will assist in the identification of failure modes based on appearance. For the purposes of this document, the following terms are explained: — failure of a rolling bearing: the result of a damage that prevents the bearing meeting the intended design performance or marks the end of service life; — in service: as soon as the bearing has left the manufacturer’s factory; — visible features: those that are possible to observe directly or with magnifiers or optical microscopes, also those from pictures, but only with the use of non-destructive methods. Consideration is restricted to characteristic forms of change in appearance and failure that have welldefined appearance and which can be attributed to particular causes with a high degree of certainty. The features of particular interest for explaining changes and failures are described. The various forms are illustrated with photographs and the most frequent causes are indicated. If the root cause cannot be reliably assessed by the examination and characterization of visual features against the information in this document, then additional investigations are to be considered. These methods are summarized in A.3 and may involve, for example, the use of invasive methods possibly including taking of cross sections, metallurgical structural analysis by visual and electronic microscopes, chemical and spectrographic analysis. These specialized methods are outside the scope of this document. The failure mode terms shown in the subclause titles are recommended for general use. Where appropriate, alternative expressions or synonyms used to describe the submodes are given and explained in A.4. Examples of rolling bearing failures are given in A.2, together with a description of the causes of failure and proposed corrective actions.
Rolling bearings - Damage and failures - Terms, characteristics and causes
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-03
- 实施
Plain bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance range
- ICS
- 21.100.10
- CCS
- J11
- 发布
- 2017-03
- 实施
Rolling bearings - Linear motion rolling bearings - Vocabulary (ISO 24393:2008); Text in German, English and French
- ICS
- 01.040.21;21.100.20
- CCS
- J11
- 发布
- 2017-03
- 实施
Rolling bearings. Linear motion rolling bearings. Dynamic load ratings and rating life
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-02-28
- 实施
- 2017-02-28
Rolling bearings. Linear motion rolling bearings. Static load ratings
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-02-28
- 实施
- 2017-02-28
Rolling bearings - Linear motion rolling bearings - Part 2: Static load ratings
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-02-01
- 实施
Rolling bearings - Linear motion rolling bearings - Part 1: Dynamic load ratings and rating life
- ICS
- 21.100.20
- CCS
- J11
- 发布
- 2017-02-00
- 实施
