J27 操作件 标准查询与下载

DIN 3319:2002 碟形手轮.锥形方头毂孔

The document specifies handwheels which are mainly used for fittings made with squares with tapered sides.

Hand-wheels, dished - Hub hole with tapered square

DIN 3220:2002 扁型手轮.锥形方头毂孔

The document specifies handwheels which are mainly used for fittings with squares with tapered sides.

Hand-wheels, flat type - Hub hole with tapered square

DIN 390:2002 碟形手轮.方头直式毂孔

The document describes handwheels which are mainly used for fittings with squares for operating spindles in accordance with DIN 79.

Hand-wheels, dished - Hub hole with straight square

DIN 319:2002 球形把手

The document describes ball knobs which are used for handles in the field of mechanical engineering, on machine tools, devices and applications.

Ball knobs

DIN 950:2000 盘型手轮.圆型或正方形毂孔

Hand wheels specified in this standard are mostly used on machines and equipment.

Handwheels, dished - Hub hole round or straight square

DIN 3670:2000 盘形手轮

The requirements specifies in this standard apply to disc type hand wheels to be mostly on machines and equipment.

Hand wheels, disk type

AIA/NAS NASM35793-1999 FSC 5340型普通孔外部装置手柄

Handle, Bail-Chest, Surface Mounting, Plain Holes FSC 5340

Handle, Bail-Chest, Surface Mounting, Plain Holes

AIA/NAS NASM35791-1999 FSC 5340型外部安装孔埋头钉手柄

Handle, Bail-Chest, Surface Mounting Countersunk Holes FSC 5340

Handle, Bail-Chest, Surface Mounting Countersunk Holes

AIA/NAS NASM17984-1998 FSC 5315型扣住手柄单独运作锁快速断路栓

NASM17984, "PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKINGS,I NGLE ACTING, BUTTON HANDLE", was adopted on 30 NOVEMBER 1998 for use by the Department of Defense (DoD). Proposed changes by DoD Activities must be submitted to the DoD Adopting Activity: Defense Industrial Supply Center, ATTN: DISC-AESD, 700 Robbins Avenue, Philadelphia, PA 19111-5096. DoD Activities may obtain copies oft his standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building4 D, Philadelphia, PA 19111-5094. The private sector and other Government agenciemsa y purchase copies from the AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC., 1250 EYE STREET, N. W., WASHINGTON, DC 20005-3924.

Pin, quick release, self-retaining, positive locking, single acting, button handle [Superseded: DLA MS17984 REV F CANC NOTICE 1, DLA MS17984 REV F, DLA MS17984 REV E, DLA MS17984 REV D, DLA MS17984 REV C]

AIA/NAS NASM39087-1998 FSC 5340型弓形手柄

All surfaces to be finished after fabrication.

Handle, Bow

AIA/NAS NASM17987-1998 FSC 5315型环形手柄单向运作锁快速断路栓

NASM17987, ”PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, RING HANDLE‘’, was adopted 3o1n DECEMBER 1998 for use by the Department of Defense (DoD). Proposed changes by DoD Activities must be submitted to the DoD Adopting Activity: Defense Industrial Supply Center, ATTN: DISC-AESD, 700 Robbins Avenue, Philadelphia, PA 19111-5096. DoD Activities may obtain copies of this standfarrodm the Standardization Document Order Desk, 700 Robbins Avenue, Building 40, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the

Pin, quick release, self-retaining, positive locking, single acting, ring handle [Superseded: DLA MS17987 REV G CANC NOTICE 1, DLA MS17987 REV G, DLA MS17987 REV F, DLA MS17987 REV E, DLA MS17987 REV D, DLA MS17987 REV C]

AIA/NAS NASM17990-1998 FSC 5315型环形手柄双向运作锁快速断路栓

NASMl7990, "PIN, QUICK RELEASE, POSITIVE LOCKING, DOUBLEA CTING, RING HANDLE:", was adopted on 30 NOVEMBER 1998 for use by the Department of Defense (DoD). Proposed changes by DoD Activities must be submitted to the DoD Adopting Activity: Defense Industrial Supply Center, ATTN: DISC-AESD, 700 Robbins Avenue, Philadelphia, PA 19111-5096. DoD Activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC., 1250 EYE STREET, N. W., WASHINGTON, DC 20005-3924.

Pin, quick release, positive locking, double acting, ring handle

AIA/NAS NASM35792-1998 FSC 5340型凹槽手柄

Handle, Bail Chest, Recessed FSC 5340

Handle, Bail Chest, Recessed

DIN 6337:1996 球形手柄

The specifications laid down in this document apply to steel operating handles with ball knob according to DIN 319 and handle mounting in the form of plain hole thread.

Ball handles

DIN 6336:1996 星形把手

The specifications laid down in this document apply to star grips made from metal and moulding material according to DIN 7708-2.

Star grips

DIN 6335:1996 掌形把手

The specifications laid down in this document apply to palm handles made from metal and moulding material according to DIN 7708-2.

Palm grips

DIN 388-1:1996 带波形轮缘的塑料手轮

The specifications laid down in this document apply to plastic hand-wheels with ripple ring made from moulding material according to DIN 7708 with squares according to DIN 79.

Hand-wheels of plastic with ripple ring

DIN 99:1996 锥形手柄

Tapered handles

JB/T 7275-1994 嵌套

本标准规定了嵌套的型式、尺寸及技术要求。

Nesting

JB/T 7274.8-1994 三角箭形把手

本标准规定了三角箭形把手的型式、尺寸及技术要求。

Delta knobs