共找到 1153 条与 铸造 相关的标准,共 77 页
本标准规定了一般工程与结构用低合金铸钢的牌号及其铸件的技术条件。 本标准适用于在常温下使用的一般工程与结构用低合金铸钢件(以下简称铸件)。
Low alloy steel castings for general engineering and structural purposes
本标准规定了熔模铸造模料热稳定性测定方法。 本标准适用于测定各种熔模铸造用模料的热稳定性。
Testing method for thermal stability of pattern materials in investment casting
本标准规定了熔模铸造模料粘度的测定方法。 本标准适用于测定熔模铸造模料处于液态某一指定温度不同剪切速率下的粘度。
Testing method for viscosity of pattern materials in investment casting
本标准规定了熔模铸造模料流动性的测定方法。 本标准适用于测定熔模铸造模料的流动性。
Testing method for fluidity of pattern materials in investment casting
本标准规定了熔模铸造模料酸值的测定方法。 本标准适用于测定各种熔模铸造模料的酸值。
Testing method for acid number of pattern materials in investment casting
本标准规定了熔模铸造模料表面硬度的测定方法。 本标准适用于测定熔模铸造用均质模料的表面硬度。
Testing method for surface hardness of pattern materials in investment casting
本标准规定了熔模铸造模料线收缩率的测定方法。 本标准适用于测定熔模铸造模料从压注温度冷却至室温的线性尺寸变化率。
Testing method for linear contraction of pattern materials in investment casting
本标准规定了熔模铸造模料灰分的测定方法。 本标准适用于测定各种熔模铸造模料的灰分。
Testing method for ash content of pattern materials in investment casting
本标准规定了熔模铸造模料在室温下抗弯强度的测定方法。 本标准适用于测定熔模铸造模料室温弯曲脆断时的强度。
Testing methods for bending strength of pattern materials in investment casting
本标准规定了熔模铸造模料熔点的测定方法。 本标准适用于用冷却曲线法测定晶质模料的熔点。本标准不适用于测定微晶或非晶质模料的熔点。
Surface roughness for plastic parts
本标准规定了铸造高锰钢在金相显微镜下进行显微组织、晶粒度和非金属夹杂物级别的评定。 本标准适用于GB5680《高锰钢铸件技术条件》中所规定的铸造高锰钢。
Metallographs for high manganese cast steel
本标准规定了压铸有色合金的试样类型、尺寸以及试样要求。 本标准适用于压铸有色合金力学性能的测定。
Test specimens for non-ferrous die-casting alloys
本标准规定了锌合金压铸件分类、技术要求、试验方法、检验规则、交货条件等。 本标准适用于锌合金压铸件。
Zinc alloy die castings
本标准规定了镁合金铸件的分类、技术要求、试验方法、检验规则和交货条件等。 本标准适用于镁合金砂型和金属型铸件。
Magnesium alloy castings
本标准规定了铜合金铸件的分类、技术要求、试验方法与检验规则等。 本标准适用于铜合金砂型铸造、金属型铸造、连续铸造、离心铸造的铸件。
Copper alloy castings
本标准规定了压铸锌合金的牌号和代号的表示方法、技术要求以及检验方法。 本标准适用于制造锌合金压铸件。
Zinc die-casting alloys
本标准规定了铸造镁合金的化学成分及砂型单铸试样的力学性能。 本标准规定的镁合金适用于制造砂型和金属型铸件。
Casting magnesium alloys
Silica and Bauxite sand and flour for investment casting
本标准规定了铸造用合脂粘结剂的牌号、技术要求、试验方法和检验规则。 本标准适用于以石蜡为原料制取合成脂肪酸过程中的蒸馏后残渣(副产品)并以适量溶剂稀释配成的铸造砂芯用合脂粘结剂。
The residue from distrition of synthe4ic fatty acids as binder for foundry
本标准规定了熔模铸造用铝矾土砂、粉的牌号、技术要求、试验方法和检验规则。 本标准适用于熔模铸造制壳用铝矾土熟料和铝矾土合成料。
Bauxite sand and flour for investment casting
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号