J44 一般卡具 标准查询与下载

JB/T 9162.41-1999 筒式百分表传动器.尺寸

本标准规定了筒式百分表传动器的型式和尺寸。

Cylinder type transmitter for dial indicator.Dimensions

JB/T 9162.42-1999 长筒式百分表传动器.尺寸

本标准规定了长筒式百分表传动器的型式和尺寸。

Long cylinder type transmitter for dial indicator.Dimensions

JB/T 9162.43-1999 拨开式百分表传动器.尺寸

本标准规定了拨开式百分表传动器的型式和尺寸。

Dial indicator transmitter with lift lever.Dimensions

DIN 3015-3:1999 固定卡圈.块型卡圈.第3部分:双卡圈

The document specifies double clamps for use for fastening of various lines (e.g. tubes, pipes, cables etc.). The type includes the diameters from 6 mm to 42 mm.

Fastening clamps - Block clamps - Part 3: Double clamps (Z)

DIN 3015-2:1999 固定卡圈.块型卡圈.第2部分:重型系列(S)

The document specifies fastening clamps for use for fastening of various lines (e.g. tubes, pipes, cables etc.). The heavy type includes the diameters from 6 mm to 406 mm.

Fastening clamps - Block clamps - Part 2: Heavy duty (S)

DIN 3015-1:1999 固定卡圈.块型卡圈.第1部分:轻型系列(L)

The document specifies fastening clamps used for the attachment (fastening) of various lines (tubes, pipes, cable). The light type include diameters from 6 mm to 102 mm.

Fastening clamps - Block clamps - Part 1: Light duty (L)

AIA/NAS NASM85449/2-1998 FSC 5340型275度F的321防锈钢EPR橡胶软垫鞍装类夹子组装总规范

Clamp Assembly, Saddle-Type, Cushioned, EPR Rubber, 321 Cres, 275 Degrees F, General Purpose FSC 5340

Clamp Assembly, Saddle-Type, Cushioned, EPR Rubber, 321 Cres, 275 Degrees F, General Purpose

AIA/NAS NASM85449/3-1998 FSC 5340型500度F加强321防锈钢锥形软垫鞍装类夹子组装总规范

Clamp Assembly, Saddle-Type, Cushioned, Silcone Fabric, Reinforced 321 Cres, 500 Degrees F, General Purpose FSC 5340

Clamp Assembly, Saddle-Type, Cushioned, Silcone Fabric, Reinforced 321 Cres, 500 Degrees F, General Purpose

AIA/NAS NASM85449-1998 FSC 5340型软垫鞍装类夹子组装总规范

This specification covers tube support saddle-type clamps. Tests and criteria noted do not indicate any specific areas of applicatioonr usage. Supplemental testing may be necessary to determine suitability for specific environments and applications.

Clamp Assembly, Saddle-Type, Cushion, General Specification for

AIA/NAS NASM85449/1-1998 FSC 5340型抗燃275度F的321防锈钢腈基丁二烯橡胶软垫鞍装类夹子组装总规范

Clamp Assembly, Saddle-Type, Cushioned, NBR Rubber, 321 Cres, 275 Degrees F, Fuel Resistant, General Purpose FSC 5340

Clamp Assembly, Saddle-Type, Cushioned, NBR Rubber, 321 Cres, 275 Degrees F, Fuel Resistant, General Purpose

JIS B 6339:1998 机械加工中心.刀柄及止动旋钮

この規格は，主として自動工具交換装置付マシニングセンタに使用するッールシャンク及びプルスタッドについて規定する。

Machining centers -- Tool shanks and retention knobs

JIS B 6337:1998 机床用工件托盘.尺寸

この規格は，工作機械への工作物の取付け及び工作機械間の工作物の搬送に使用する，呼び寸法320 mmから2 000 mmまでのパレットの形状及び寸法について規定する。

Workholding pallets for machine tools -- Dimensions

DIN 6594:1998 转位式刀片用符合DIN 69893-1 A型要求的带空心锥杆和冷却润滑剂导槽的钻头.主要尺寸

The document specifies the main dimensions (diameter/length ration) of drills for indexable inserts with hallow taper shanks in accordance with DIN 69893-1, type A.#,,#

Drills with hollow taper shanks and coolant fluid supply according to DIN 69893-1 type A for indexable inserts - Main dimensions

DIN 6596:1998 转位式刀片用符合DIN 69893-1 A型要求的带空心锥杆和冷却润滑剂导槽的钻头.标识

The document specifies the designation of drills for indexable inserts with hollow taper shanks in accordance with DIN 69893-1, type A.#,,#

Drills with hollow taper shanks and coolant fluid supply according to DIN 69893-1 type A for indexable inserts - Designation

AIA/NAS NASM6818-1998 FSC 5340飞机器械装备夹

NASM6818, IIClamps, Instrument Mounting, Aircraft", was adopted on 31-MAY-98 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Industrial Supply Center, 700 Robbins Avenue, Philadelphia, PA 19111-5096. DoD activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the Aerospace Industries Association, 1250 Eye Street NW, Washington, DC 20005.

Clamps, Instrument Mounting, Aircraft

BS ISO 10889-1:1998 带园柱柄的刀架.第1部分:园柱柄、定位镗孔.技术交付条件

Tool holders with cylindrical shank - Cylindrical shank, location bore - Technical delivery conditions

BS ISO 10889-3:1998 带园柱柄的刀架.第3部分:B型带矩形径向底座

Tool holders with cylindrical shank - Type B with rectangular radial seat

BS ISO 10889-8:1997 带园柱柄刀架.第8部分:Z型、附件

ISO 10889 applies to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. This part of ISO 10889 specifies dimensions, materials, designations and technical delivery conditions for accessories type Z, i.e. clamping rings, sealing plugs and ball-type noggles, for tool holders with cylindrical shank in accordance with ISO 10889-2 to ISO 10889-7. For non-standardized accessories such as accessories as shown in the drawings, it is recommended to apply the corresponding specifications of this part of ISO 10889.

Tool holders with cylindrical shank - Type Z, accessories

BS ISO 10889-5:1997 带园柱柄刀架.D型带多个矩形底座

ISO 10889 applies to tool holders with cylindrical shank for machine tools with non-rotating tools, preferably for turning machines. This part of ISO 10889 specifies dimensions, designations and complementary technical delivery conditions for tool holders with more than one rectangular seat of types D1 and D2 with cylindrical shank in accordance with ISO 10889-1. For non-standardized tool holders with more than one rectangular seat, such as tool holders as shown in the drawings, it is recommended to apply the corresponding specifications of this part of ISO 10889.

Tool holders with cylindrical shank - Type D with more than one rectangular seat

BS ISO 10889-6:1998 带园柱柄刀架.第6部分:E型带园柱形底座

Tool holders with cylindrical shank - Type E with cylindrical seat