共找到 445 条与 一般卡具 相关的标准,共 30 页
The Protractors for Multiple Point Tool
이 규격은 2개의 금형 부품의 상호 위치 결정을 정확하게 하기 위해 사용하는 몰딩용 공구-
Tools for moulding-Mould bases-Round locating elements and spacers
The document specifies the dimensions of stepped setting-up blocks to be used in combination with other clamping elements for workpieces of jigs and fixtures on machine tool tables, pallets and clamping devices of workpieces or tools.#,,#
Stepped setting up blocks, adjustable
Boiler and Pressure Vessels.Appendix G - Nonmandatory Design Rules for Clamp Connections
Appendix G - Nonmandatory Design Rules for Clamp Connections
The ASME B5.60 standard covers general information, description and definitions of Terms related to Jaw Type workholding Chucks.
Workholding Chucks - Jaw Type Chucks
Terms and definitions related to anchor chain cables are laid down. The document will be edited bilingual (German/English).
Components for anchoring equipment - Terms and definitions
JB/T 8010.2-1999 本标准是对 JB/T 8010.2-95《机床夹具零件及部件 转动压板》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了适用于螺纹规格为 M6~M36 的转动压板。 本标准于 1981 年以 GB 2176-80 首次发布,于 1991年 4 月 30 日第一次修订为 GB/T 2176-91,于 1996 年 4 调整为 JB/T 8010.2-95。
The parts and units of jigs and fixtures.Turning clamp plate
JB/T 8010.4-1999 本标准是对 JB/T 8010.4-95《机床夹具零件及部件 转动弯压板》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了适用于螺纹规格为 M6~M42 的转动弯压板。 本标准于 1981 年以 GB 2178-80 首次发布,于 1991年 4 月 30 日第一次修订为 GB/T 2178-91,于 1996 年 4 调整为 JB/T 8010.4-95。
The parts and units of jigs and fixtures.Turning bend clamp plate
JB/T 8009.4-1999 本标准是对 JB/T 8009.4-95《机床夹具零件及部件 光面压块》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了长为 32~125mm、宽为 10~20mm 的弧形压块。 本标准于 1981 年以 GB 2174-80 首次发布,于 1991年 4 月 30 日第一次修订为 GB/T 2174-91,于 1996 年 4 调整为 JB/T 8009.4-95。
The parts and units of jigs and fixtures.Curve holddown
JB/T 8010.3-1999 本标准是对 JB/T 8010.3-95《机床夹具零件及部件 移动弯压板》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了适用于螺纹规格为 M6~M42 的移动弯压板。 本标准于 1981 年以 GB 2177-80 首次发布,于 1991年 4 月 30 日第一次修订为 GB/T 2177-91,于 1996 年 4 调整为 JB/T 8010.3-95。
The parts and units of jigs and fixtures.Moving bend clamp plate
JB/T 8009.3-1999 本标准是对 JB/T 8009.3-95《机床夹具零件及部件 圆压块》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了外径为 20~60mm 的圆压块。 本标准于 1981 年以 GB 2173-80 首次发布,于 1991年 4 月 30 日第一次修订为 GB/T 2173-91,于 1996 年 4 调整为 JB/T 8009.3-95。
The parts and units of jigs and fixtures.Round holddown
JB/T 8010.1-1999 本标准是对 JB/T 8010.1-95《机床夹具零件及部件 移动压板》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了适用于螺纹规格为 M6~M36 的移动压板。 本标准于 1981 年以 GB 2175-80 首次发布,于 1991年 4 月 30 日第一次修订为 GB/T 2175-91,于 1996 年 4 调整为 JB/T 8010.1-95。
The parts and units of jigs and fixtures.Moving clamp plate
JB/T 8010.5-1999 本标准是对 JB/T 8010.5-95《机床夹具零件及部件 移动宽头压板》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了适用于螺纹规格为 M4~M24 的移动宽头压板。 本标准于 1981 年以 GB 2179-80 首次发布,于 1991年 4 月 30 日第一次修订为 GB/T 2179-91,于 1996 年 4 调整为 JB/T 8010.5-95。
The parts and units of jigs and fixtures.Moving broad head clamp plate
JB/T 8006.2-1999 本标准是对 JB/T 8006.2-95《机床夹具零件及部件 六角头压紧螺钉》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了螺纹规格为 M8~M36 的六角头压紧螺钉。 本标准于 1981 年以 GB 2161-80 首次发布,于 1991年 4 月 30 日第一次修订为 GB/T 2161-91,于 1996 年 4 调整为 JB/T 8006.2-95。
The parts and units of jigs and fixtures.Hexagon-headed holddown screw
JB/T 8027.1-1999 本标准是对 JB/T 8027.1-95《机床夹具零件及部件 支柱》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了螺纹规格为 M5~M10 的支柱。 本标准于 1981 年以 GB 2233-80 首次发布,于 1991年 4 月 30 日第一次修订为 GB/T 2233-91,于 1996 年 4 调整为 JB/T 8027.1-95。
The parts and units of jigs and fixtures.Supporters
JB/T 8006.3-1999 本标准是对 JB/T 8006.3-95《机床夹具零件及部件 固定手柄压紧螺钉》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了螺纹规格为 M6~M20 的固定手柄压紧螺钉。 本标准于 1981 年以 GB 2162-80 首次发布,于 1991年 4 月 30 日第一次修订为 GB/T 2162-91,于 1996 年 4 调整为 JB/T 8006.3-95。
The parts and units of jigs and fixtures.Fixed handle holddown screw
JB/T 8026.6-1999 本标准是对 JB/T 8026.6-95《机床夹具零件及部件 螺钉支承》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了规格为 14~50 的螺钉支承。 本标准于 1981 年以 GB 2232-80 首次发布,于 1991年 4 月 30 日第一次修订为 GB/T 2232-91,于 1996 年 4 调整为 JB/T 8026.6-95。
The parts and units of jigs and fixtures.Supporters for screw
JB/T 8026.5-1999 本标准是对 JB/T 8026.5-95《机床夹具零件及部件 球头支承》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了球头直径为 8~32mm 的球头支承。 本标准于 1981 年以 GB 2231-80 首次发布,于 1991年 4 月 30 日第一次修订为 GB/T 2231-91,于 1996 年 4 调整为 JB/T 8026.5-95。
The parts and units of jigs and fixtures.Spherical head supporters
JB/T 8026.7-1999 本标准是对 JB/T 8026.7-95《机床夹具零件及部件 自动调节支承》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了规格为 12~20 的自动调节支承。 本标准于 1981 年以 GB 2238-80 首次发布,于 1991年 4 月 30 日第一次修订为 GB/T 2238-91,于 1996 年 4 调整为 JB/T 8026.7-95。
The parts and units of jigs and fixtures.Automatic adjuctable supportors
JB/T 8006.4-1999 本标准是对 JB/T 8006.4-95《机床夹具零件及部件 活动手柄压紧螺钉》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了螺纹规格为 M6~M24 的活动手柄压螺钉。 本标准于 1981 年以 GB 2163-80 首次发布,于 1991年 4 月 30 日第一次修订为 GB/T 2163-91,于 1996 年 4 调整为 JB/T 8006.4-95。
The parts and units of jigs and fixtures.Movable handle holddown screw
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号