J54 钻、镗、铣床 标准查询与下载

AIA/NAS NAS 907-2006 FSC 5133.Rev. 14, 1/16英寸通过1/2英寸高钴硬钢钻头

MATERIAL GROUPS: 11, 21, 31 AND 61. SEE TABLE ON SHEET 20 FOR APPLICATIONS AND LIMITATIONS.

Drills, High Speed Steel and Cobalt, 1/16 Inch thru 1/2 Inch Rev 14; FSC 5133

AIA/NAS NAS 965-2006 FSC 5133.Rev. 14, 1/16英寸通过F高钴硬钢钻头

"35756, "KEY ,WOODRUFF, STEEL ALLOY, WITH KEYWAY AND KEY SLOT DIMENSIONS", was adopted on1 OCTOBER 1998 for use by the Departmeonft Defense (DoD). Proposed changes by DoD Activities musbte submitted to thDeo D Adopting Activity: Defense Industrial Supply Center, ATTN: DISC-AESD, 700 Robbins Avenue, Philadelphia, PA 19111-5096. DoD Activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase cforpoime st he AEROSPACEI NDUSTRIES ASSOCIATION OF AMERICA, INC., 1250 EYE STREET, N. W., WASHINGTON, DC 20005- 3924.

Drills, High Speed Steel, and Cobalt Threaded Shank 1/16 Inch Thru F Rev 9; FSC 5133

GOST EN 13128-2006 金属加工机床的安全性.铣刨机(包括镗床)

Safety of metal-working machine tools. Milling machines (including boring machines)

JB/T 5245.5-2005 台式钻床.第5部分:主轴.技术条件

本标准规定了台式钻床主轴的热处理、表面质量和精度的技术要求。 本标准适用于台式钻床(包括通用台式钻床和轻型台式钻床)的主轴。

Bench drilling machine - Part 5: Spindle specifications

DLA A-A-50961 B-2005 车床机心压头

This commercial item description (CID) covers the requirements for standard and parallel clamp type lathe dogs. The lathe dogs are intended for use in a production environment, and suitable for driving cylindrical work pieces held between machine centers. Parallel clamp type lathe dogs shall be designed to hold hexagonal, square, or irregular shaped work pieces.

DOG, LATHE

DLA A-A-59386 VALID NOTICE 1-2005 手动升降台滑板式转塔六角垂直铣床

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at h_t_t_p_:_/_/_a_s_s_i_s_t_._d_a_p_s_._d_l_a_._m_i_l_

MILLING MACHINE, VERTICAL, RAM AND TURRET, KNEE, MANUAL

GSA A-A-2556 REINST NOTICE 2-2004 圬工钻(麻花钻)

DRILL, MASONRY, HAND (TWIST-FLUTE DRILL)

DRILL, MASONRY, HAND (TWIST-FLUTE DRILL)

ISO 1701-1:2004 立式和卧式升降台铣床检验条件.精度检验.第1部分:卧式机床

This part of ISO 1701 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose, normal accuracy, horizontal-spindle milling machines with table of variable height. It also specifies the applicable tolerances corresponding to the above-mentioned tests. NOTE Milling machines with table of fixed height are covered by ISO 1984. This part of ISO 1701 deals only with the verification of accuracy of the machine. It does not apply to the testing of the running of the machine (vibration, abnormal noise, stick-slip motion of components, etc.), nor to machine characteristics (such as speeds, feeds, etc.), as such checks are generally carried out before testing the accuracy.

Test conditions for milling machines with table of variable height - Testing of the accuracy - Part 1: Machines with horizontal spindle

ISO 1701-2:2004 立式和卧式升降台铣床检验条件.精度检验.第2部分:立式机床

This part of ISO 1701 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose, normal accuracy, vertical-spindle milling machines with table of variable height. It also specifies the applicable tolerances corresponding to the above-mentioned tests. NOTE Milling machines with table of fixed height are covered by ISO 1984. This part of ISO 1701 deals only with the verification of accuracy of the machine, and it does not apply to the testing of the running of the machine (vibration, abnormal noise, stick-slip motion of components, etc.) or to machine characteristics (such as speeds, feeds, etc.), which should generally be carried out before testing the accuracy.

Test conditions for milling machines with table of variable height - Testing of accuracy - Part 2: Machines with vertical spindle

NF E66-002*NF ISO 3314:2004 键槽传动的带锥孔[锥孔1:30(含1:30)]的套型钻头

Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive.

DLA OO-M-340 F-2004 铣削,研磨,钻孔和铣槽附件

This specification covers an electric motor driven attachment for milling, grinding, drilling, slotting, boring, gear cutting, thread milling, and keyseating operations.

MILLING, GRINDING, DRILLING, AND SLOTTING ATTACHMENT

ARMY A-A-50219 VALID NOTICE 1-2004 车床铁路双端驱动车轮

A-A-50219, dated 20 January 1984, has been reviewed and determined to be valid for use in acquisition

WHEEL, LATHE RAILWAY, DUAL END DRIVE

ARMY A-A-50220 VALID NOTICE 1-2004 双或单端驱动定期修整铁路车轴车床

A-A-50220, dated 20 January 1984, has been reviewed and determined to be valid for use in acquisition

LATHE, AXLE, JOURNAL TRUING RAILWAY, DUAL OR SINGLE END DRIVE

NF E66-055:2004 弧型中心钻.R型

Centre drills for centre holes with radius form - Type R.

NF E66-077:2004 攻丝前钻孔用圆柱柄阶梯麻花钻

Subland twist drills with cylindrical shanks for holes prior to tapping screw threads.

NF E66-078:2004 攻丝前钻孔用莫氏锥柄阶梯麻花钻

Subland twist drills with Morse taper shanks for holes prior to tapping screw threads.

NF E66-054:2004 带护槽的中心钻.B型

Centre drills for centre holes with protecting chamfer - Type B.

NF E66-053:2004 不带护槽的中心钻.A型

Centre drills for centre holes without protecting chamfers - Type A.

DLA A-A-59328 VALID NOTICE 1-2004 升降台横轴铣床

The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at www.dodssp.dla.mil

MILLING MACHINE, HORIZONTAL SPINDLE, KNEE

JIS B 6228:2003 桥型龙门铣床.精度测试

この規格は，JIS B 6191及びJIS B 6192に基づいて，普通精度のはん(汎)用門形プラノミラーの静的精度，工作精度及び数値制御による位置決め精度検査方法並びに，それぞれに対応する許容値について規定する。

Bridge type plano-milling machines -- Testing of the accuracy