J54 钻、镗、铣床 标准查询与下载

BS ISO 3070-1:2007 机床.测试卧式镗床和铣床精度的试验条件.带有固定式床身和可移动工作台的机床

This part of ISO 3070 specifies, with reference to ISO 230-1, ISO 230-2 and ISO 230-7, geometric tests, machining tests, spindle tests and tests for checking the accuracy and repeatability of positioning by numerical control of general purpose, normal accuracy, horizontal spindle boring and milling machines having a fixed column and movable table. This part of ISO 3070 also specifies the applicable tolerances corresponding to these tests. This type of machine can be provided with spindle heads of different types, such as those with sliding boring spindle and milling spindle, sliding boring spindle and facing head, or ram or milling ram. This part of ISO 3070 concerns machines having both longitudinal (Z-axis) and transverse (X-axis) movement of the table, a vertical movement of the spindle head (Y axis), movement of the boring spindle or ram (W axis) and, possibly, a feed movement of radial facing slide in the facing head (U axis), and that may include a rotary or indexing table. NOTE In other parts of ISO 3070 spindle ram movement is designated as the Z axis. This part of ISO 3070 deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components) nor to machine characteristics (e.g. speeds, feeds), as such checks are generally carried out before testing the accuracy.

Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Machines with fixed column and movable table

BS ISO 3070-2:2007 机床.测试卧式镗床和铣床精度的试验条件.带可移动床身和固定式工作台的机械

This part of ISO 3070 specifies, with reference to ISO 230-1, ISO 230-2 and ISO 230-7 geometric tests, machining tests, spindle tests and tests for checking the accuracy and repeatability of positioning by numerical control of general purpose, normal accuracy, horizontal spindle boring and milling machines having a movable column and fixed table. This part of ISO 3070 also specifies the applicable tolerances corresponding to these tests. This type of machine can be provided with spindle heads of different types, such as those with sliding boring spindle and milling spindle, sliding boring spindle and facing head, or ram or milling ram. This part of ISO 3070 concerns machines having movement of the column or column saddle on the bed (X axis), vertical movement of the spindle head (Y axis), movement of the boring spindle or ram (Z axis) and, possibly, a feed movement of radial facing slide in the facing head (U axis). Some machines also have an intermediate saddle with slideways between column and bed to achieve additional movement of the column parallel to the spindle axis (W axis). NOTE In ISO 3070-1, spindle ram movement is designated as the W axis. This part of ISO 3070 deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components) nor to machine characteristics (e.g. speeds, feeds), as such checks are generally carried out before testing the accuracy.

Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Machines with movable column and fixed table

BS ISO 3070-3:2007 机床.测试卧式镗床和铣床精度的试验条件.带有可移动床身和可移动工作台的机床

This part of ISO 3070 specifies, with reference to ISO 230-1, ISO 230-2 and ISO 230-7, geometric tests, machining tests, spindle tests and tests for checking the accuracy and repeatability of positioning by numerical control of general purpose, normal accuracy, horizontal spindle boring and milling machines having a movable column and movable table. This part of 3070 also specifies the applicable tolerances corresponding to these tests. This type of machine can be provided with spindle heads of different types, such as those with sliding boring spindle and milling spindle, sliding boring spindle and facing head, or ram or milling ram. This part of ISO 3070 concerns machines having movement of the column or column saddle on the bed (X axis), vertical movement of the spindle head (Y axis), movement of the boring spindle or ram (Z axis) and, possibly, a feed movement of radial facing slide in the facing head (U axis). Some machines also have an intermediate saddle with slideways between column and bed to achieve additional movement of the column parallel to the spindle axis (W axis). NOTE In ISO 3070-1 spindle ram movement is designated as the W axis. This part of ISO 3070 deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components) nor to machine characteristics (e.g. speeds, feeds), as such checks are generally carried out before testing the accuracy.

Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Machines with movable column and movable table

ISO 8636-2:2007 机床.桥式铣床的试验条件.精度测试.第2部分:移动桥式(移动龙门式)铣床

This part of ISO 8636 specifies, with reference to ISO 230-1, ISO 230-2, and ISO 230-7, geometric tests, machining tests, and tests for checking accuracy and repeatability of positioning of numerically controlled axes for general-purpose normal accuracy bridge-type milling machines with a travelling bridge (gantry-type). This part of ISO 8636 also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 8636 is applicable to machines with travelling bridge and fixed table. It does not include single-column (open sided) machines and those with fixed bridge and moving tables. This part of ISO 8636 deals only with the verification of the accuracy of the machine. It does not apply to the testing of the machine operation (vibration, abnormal noise, stick-slip motion of components, etc.) nor to machine characteristics (such as speeds, feeds, etc.), which should generally be checked before testing the accuracy. This part of ISO 8636 provides the terminology used for the principal components of the machines and the designation of the axes with reference to ISO 841.

Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Part 2: Travelling bridge (gantry-type) machines

ISO 3070-3:2007 机床.测试卧式镗床和铣床精度的试验条件.第3部分:带有可移动床身和固定式工作台的机床

This part of ISO 3070 specifies, with reference to ISO 230-1, ISO 230-2 and ISO 230-7, geometric tests, machining tests, spindle tests and tests for checking the accuracy and repeatability of positioning by numerical control of general purpose, normal accuracy, horizontal spindle boring and milling machines having a movable column and movable table. This part of 3070 also specifies the applicable tolerances corresponding to these tests. This type of machine can be provided with spindle heads of different types, such as those with sliding boring spindle and milling spindle, sliding boring spindle and facing head, or ram or milling ram. This part of ISO 3070 concerns machines having movement of the column or column saddle on the bed (X axis), vertical movement of the spindle head (Y axis), movement of the boring spindle or ram (Z axis) and, possibly, a feed movement of radial facing slide in the facing head (U axis). Some machines also have an intermediate saddle with slideways between column and bed to achieve additional movement of the column parallel to the spindle axis (W axis). NOTE In ISO 3070-1 spindle ram movement is designated as the W axis. This part of ISO 3070 deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components) nor to machine characteristics (e.g. speeds, feeds), as such checks are generally carried out before testing the accuracy.

Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 3: Machines with movable column and movable table

ISO 3070-2:2007 机床.测试卧式镗床和铣床精度的试验条件.第2部分:带可移动床身和固定式工作台的镗床和铣床

This part of ISO 3070 specifies, with reference to ISO 230-1, ISO 230-2 and ISO 230-7 geometric tests, machining tests, spindle tests and tests for checking the accuracy and repeatability of positioning by numerical control of general purpose, normal accuracy, horizontal spindle boring and milling machines having a movable column and fixed table. This part of ISO 3070 also specifies the applicable tolerances corresponding to these tests. This type of machine can be provided with spindle heads of different types, such as those with sliding boring spindle and milling spindle, sliding boring spindle and facing head, or ram or milling ram. This part of ISO 3070 concerns machines having movement of the column or column saddle on the bed (X axis), vertical movement of the spindle head (Y axis), movement of the boring spindle or ram (Z axis) and, possibly, a feed movement of radial facing slide in the facing head (U axis). Some machines also have an intermediate saddle with slideways between column and bed to achieve additional movement of the column parallel to the spindle axis (W axis). NOTE In ISO 3070-1, spindle ram movement is designated as the W axis. This part of ISO 3070 deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components) nor to machine characteristics (e.g. speeds, feeds), as such checks are generally carried out before testing the accuracy.

Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 2: Machines with movable column and fixed table

ISO 3070-1:2007 机床.测试卧式镗床和铣床精度的试验条件.第1部分:带有固定式床身和可移动工作台的机床

This part of ISO 3070 specifies, with reference to ISO 230-1, ISO 230-2 and ISO 230-7, geometric tests, machining tests, spindle tests and tests for checking the accuracy and repeatability of positioning by numerical control of general purpose, normal accuracy, horizontal spindle boring and milling machines having a fixed column and movable table. This part of ISO 3070 also specifies the applicable tolerances corresponding to these tests. This type of machine can be provided with spindle heads of different types, such as those with sliding boring spindle and milling spindle, sliding boring spindle and facing head, or ram or milling ram. This part of ISO 3070 concerns machines having both longitudinal (Z-axis) and transverse (X-axis) movement of the table, a vertical movement of the spindle head (Y axis), movement of the boring spindle or ram (W axis) and, possibly, a feed movement of radial facing slide in the facing head (U axis), and that may include a rotary or indexing table. NOTE In other parts of ISO 3070 spindle ram movement is designated as the Z axis. This part of ISO 3070 deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components) nor to machine characteristics (e.g. speeds, feeds), as such checks are generally carried out before testing the accuracy.

Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 1: Machines with fixed column and movable table

KS B ISO 1984-1:2007 机床铣床检验条件.精度检验.第1部分:卧式铣床

이 규격은 KS B ISO 230-1을 기초로 하여 범용으로 사용하는 베드형 수평 밀링 머

Bed type milling machines-Testing of the accuracy-Part 1:Milling machines with horizontal spindle

KS B ISO 1984-2:2007 机床铣床检验条件.精度检验.第2部分:立式铣床

이 규격은 KS B ISO 230-1을 기초로 하여 범용으로 사용하는 베드형 수직 밀링 머

Bed type milling machines-Testing of the accuracy-Part 2 : Milling machines with vertical spindle

KS B ISO 2772-2:2007 箱型立式钻床.精度试验.第2部分:实用试验

이 규격은 범용 및 보통 정밀급으로 사용하는 각 칼럼형 직립 드릴링 머신의 강성 시험에 대

Test conditions for box type vertical drilling machines-Testing of the accuracy-Part 2:Practical test

KS B ISO 2773-1:2007 柱型立式钻床.精度试验.第1部分:几何参数试验

이 규격은 KS B ISO 230-1을 기초로 하여 범용 및 보통 정밀급으로 사용하는 필러

Test conditions for pillar type vertical drilling machines-Testing of accuracy-Part 1:Geometrical tests

KS B ISO 2773-2:2007 柱型立式钻床的检验条件.精度试验.第1部分:实用试验

이 규격은 범용 및 보통 정밀급 필러형 직립 드릴링 머신에 대한 강성 시험에 대하여 규정한

Test conditions for pillar type vertical drilling machines-Testing of the accuracy-Part 2:Practical test

JB/T 10793.1-2007 高精度加工中心 第1部分:卧式机床 精度检验

JB/T10793 的本部分规定了高精度卧式加工中心的几何精度、定位精度和重复定位精度（包括工件夹持托板）、工作精度检验的要求及方法。 本部分适用于基本上具有四个数控轴线，其中三个线性轴线（X 、Y 、Z）行程至 2000mm 和一个回转轴线（B（上标´））的高精度卧式加工中心。 线性轴线行程大于 2000mm 的高精度卧式加工中心也可参照使用。

High precision machining centres- Part 1: Accuracy tests for machines with horizontal spindle

JIS B 6203-2:2007 工作台高度可调的铣床试验条件.精确度测试.第2部分:立式铣床

この規格は，JIS B 6191に基づいて，普通精度のはん(汎)用ひざ形立てフライス盤の静的精度及び工作精度の検査方法，並びにそれぞれの検査事項に対応する許容値について規定する

Test conditions for milling machines with table of variable height -- Testing of accuracy -- Part 2: Machines with vertical spindle

JIS B 6203-1:2007 带升降工作台的铣床用试验条件.精度试验.第1部分:卧式机床

Test conditions for milling machines with table of variable height - Testing of the accuracy - Part 1: Machines with horizontal spindle

NF E60-421/A1:2007 机床的安全性.铣床(包括镗床)

Safety of machine tools - Milling machines (including boring machines).

DLA A-A-51137 B-2007 车床钻探工具和钻杆刀架

This commercial item description (CID) covers tool holders that are designed to hold and support boring tools and boring bars used on metalworking lathes.

TOOL HOLDERS, BORING TOOL AND BORING BAR, LATHE

DIN EN 13128:2007 机床安全性.铣床(包括镗孔机)

1.1 This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of milling machines including machines capable of performing boring operations. Machines covered by this standard include but are not limited to: - knee and column type milling machines - bed-type milling machines - multi-spindle milling machines - plano-milling machines - profile and contouring milling machines - milling and boring machines 1.2 This standard takes account of intended use including reasonably foreseeable misuse,maintenance,cleaning,and setting operations.It presumes access to the machine from all directions.It describes means to reduce risks to operators and other exposed persons. 1.3 This standard also applies to workpiece transfer devices when they form an integral part of the machine. 1.4 This standard deals with significant hazards relevant to milling machines when they are used as intended and under the conditions foreseen by the manufacturer. 1.5 Hazards arising from other metal working processes(e.g. grinding,turning,forming,EDM,laser processing) are covered by other standards. 1.6 Milling machines with automatic tool changing capabilities are not covered by this standard. 1.7 This standard is not applicable to milling machines which were manufactured before the date of publication by CEN of this standard.

Safety of machine tools - Milling machines (including boring machines); German version EN 13128:2001+A1:2006

JB/T 7416-2007 数控坐标镗床技术条件

本标准规定了数控坐标镗床的制造和验收要求。 本标准适用于工作台面宽度小于或等于2000mm的M级和P级精度等级的单柱和双柱数控坐标镗床。

Nc jig boring machines Specifications

JB/T 2254.2-2007 坐标镗床 第2部分:技术条件

JB/T 2254的本部分规定了坐标镗床的制造和验收要求。 本部分适用于工作台面宽度小于或等于2000mm的M级和P级精度等级的单柱和双柱坐标镗床。

Jig boring machines Part 2: Specifications