J54 钻、镗、铣床 标准查询与下载

DIN ISO 10887:2003 有键型三爪钻头卡盘.技术规范

The standard specifies the dimensional characteristics and concentricity tolerance requirements for key type three-jaw drill chucks with taper bore or internal thread mounts. Three classes of chucks are specified, namely: - Heavy (H) - Medium (M) - Light (L) for use in various fields of activity. Basic dimensions for three-jaw drill chuck keys are also specified.#,,#

Key type three-jaw drill chucks - Specification (ISO 10887:1999)

DIN ISO 10888:2003 无键型三爪钻头卡盘.技术规范

Keyless type three-jaw drill chucks - Specification (ISO 10888:1999)

DLA A-A-55803 A VALID NOTICE 1-2003 主轴电动3.0-7.5马力电脑数字控制3轴立式型铣床

A-A-55803A, dated 14 November 1996, has been reviewed and determined to be valid for use in acquisition

MILLING MACHINE, VERTICAL KNEE TYPE, 3 AXIS, COMPUTER NUMERICAL CONTROL, 3.0 TO 7.5 HORSEPOWER SPINDLE DRIVE

BS ISO 1984-2:2001 固定高度工作台的手工控制铣床的试验条件.精度试验.带有垂直主轴的机器

This part of ISO 1984 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose and normal-accuracy milling machines with table of fixed height and with a vertical spindle. It also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 1984 deals only with the verification of the geometric accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to checking of its characteristics (speeds, feeds, etc.), which should generally be checked before testing the accuracy. This part of ISO 1984 defines the terminology used for the principal elements of the machine and indicates the designation of axes in accordance with ISO 841[1]. NOTE Numerically controlled milling machines are covered by ISO 10791-2[2].

Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Machines with vertical spindle

BS ISO 1984-1:2001 固定高度工作台的手工控制铣床的试验条件.精度试验.带有水平主轴的机器

This part of ISO 1984 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose and normal-accuracy milling machines with table of fixed height and with a horizontal spindle. It also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 1984 deals only with the verification of the geometric accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to the checking of its characteristics (speeds, feeds, etc.), which should generally be checked before testing accuracy. This part of ISO 1984 defines the terminology used for the principal elements of the machine and indicates the designation of axes in accordance with ISO 841[1]. NOTE Numerically controlled milling machines are covered by ISO 10791 -1 [2].

Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Machines with horizontal spindle

NF E60-421:2001 机床的安全性.铣床(包括镗床)

Safety of machine-tools - Milling machines (including boring machines).

BS EN 13128:2001 机床安全性.铣床(包括镗床)

1 This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of milling machines (see 3.1) including machines capable of performing boring operations (see 3.5). Machines covered by this standard include but are not limited to: - knee and column type milling machines (see figures C.1, C.2); - bed-type milling machines (see figure C.3); - multi-spindle milling machines (see figures C.4 and C.5); - plano-milling machines (see figures C.4 and C.5); - profile and contouring milling machines (see figure C.6), - milling and boring machines (see figure C.7). 2 This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations. It presumes access to the machine from all directions. It describes means to reduce risks to operators and other exposed persons. 3 This standard also applies to workpiece transfer devices when they form an integral part of the machine. 4 This standard deals with significant hazards relevant to milling machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). 5 Hazards arising from other metal working processes (e.g. grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography). 6 Milling machines with automatic tool changing capabilities are not covered by this standard (see prEN 12417:1996). 7 This standard is not applicable to milling machines which were manufactured before the date of publication by CEN of this standard.

Safety of machine tools - Milling machines (including boring machines)

BS EN 12717:2001 机床的安全.钻床

1 This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of stationary drilling machines (see 3.1). This standard covers both manual and automatic drilling machines. These include but are not limited to: - pedestal drilling machines (see figure A.1); - radial arm drilling machines (see figure A.2); - coordinate table drilling machines (see figure A.3); - horizontal spindle drilling machines (see figure A.4); - multi-spindle drilling machines (see figure A.5) - turret type drilling machines with manual control of turret index. 2 This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations. It presumes access to the machine from all directions. It describes means to reduce risks to operators and other exposed persons. 3 This standard also applies to workpiece transfer devices when they form an integral part of the machine. 4 This standard deals with significant hazards relevant to drilling machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). 5 Hazards arising from other metal working processes (e.g. milling, grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography). 6 Automatic drilling machines with automatic tool changing capabilities are not covered by this standard (see prEN 12417:1996). 7 This standard is not applicable to drilling machines, which were manufactured before the date of publication by CEN of this standard.

Safety of machine tools - Drilling machines

BS EN 12717:2001+A1:2009 机械工具的安全性.钻机

1.1 This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of stationary drilling machines (see 3.1). This standard covers both manual and automatic drilling machines. These include but are not limited to:  pedestal drilling machines (see figure A.1);  radial arm drilling machines (see figure A.2);  coordinate table drilling machines (see figure A.3);  horizontal spindle drilling machines (see figure A.4);  multi–spindle drilling machines (see figure A.5)  turret type drilling machines with manual control of turret index. 1.2 This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations. It presumes access to the machine from all directions. It describes means to reduce risks to operators and other exposed persons. 1.3 This standard also applies to workpiece transfer devices when they form an integral part of the machine. 1.4 This standard deals with significant hazards relevant to drilling machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). 1.5 Hazards arising from other metal working processes (e.g. milling, grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography). 1.6 Automatic drilling machines with automatic tool changing capabilities are not covered by this standard (see prEN 12417:1996). 1.7 This standard is not applicable to drilling machines, which were manufactured before the date of publication by CEN of this standard.

Safety of machine tools - Drilling machines

BS EN 13128:2001+A2:2009 机床安全性.铣床(包括镗床)

1.1 This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of milling machines (see 3.1) including machines capable of performing boring operations (see 3.5). Machines covered by this standard include but are not limited to: ? knee and column type milling machines (see figures C.1, C.2); ? bed–type milling machines (see figure C.3); ? multi–spindle milling machines (see figures C.4 and C.5); ? plano–milling machines (see figures C.4 and C.5); ? profile and contouring milling machines (see figure C.6), ? milling and boring machines (see figure C.7). 1.2 This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations. It presumes access to the machine from all directions. It describes means to reduce risks to operators and other exposed persons. 1.3 This standard also applies to workpiece transfer devices when they form an integral part of the machine. 1.4 This standard deals with significant hazards relevant to milling machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). 1.5 Hazards arising from other metal working processes (e.g. grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography). 1.6 Milling machines with automatic tool changing capabilities are not covered by this standard (see prEN 12417:1996). 1.7 This standard is not applicable to milling machines which were manufactured before the date of publication by CEN of this standard.

Safety of machine tools - Milling machines (including boring machines)

ISO 1984-2:2001 床身铣床检验条件.精度检验.第2部分:立式铣床

This part of ISO 1984 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose and normal-accuracy milling machines with table of fixed height and with a vertical spindle. It also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 1984 deals only with the verification of the geometric accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to checking of its characteristics (speeds, feeds, etc.), which should generally be checked before testing the accuracy. This part of ISO 1984 defines the terminology used for the principal elements of the machine and indicates the designation of axes in accordance with ISO 841 fl. NOTE Numerically controlled milling machines are covered by ISO 10791-2t2l

Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Part 2: Machines with vertical spindle

ISO 1984-1:2001 床身铣床检验条件.精度检验.第1部分:卧式铣床

This part of ISO 1984 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose and normal-accuracy milling machines with table of fixed height and with a horizontal spindle. It also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 1984 deals only with the verification of the geometric accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to the checking of its characteristics (speeds, feeds, etc.), which should generally be checked before testing accuracy. This part of ISO 1984 defines the terminology used for the principal elements of the machine and indicates the designation of axes in accordance with ISO 841111 NOTE Numerically controlled milling machines are covered by ISO 10791-lt2!.

Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Part 1: Machines with horizontal spindle

ANSI B11.8-2001 机床.带或不带自动控制的手动铣床、钻床和镗床用安全要求

This American National Standard specifies safety requirements for the design, construction, operation and maintenance (including installation, dismantling and transport) of manually controlled milling, drilling, and boring machines. This standard also ap

Machine Tools - Safety Requirements for Manual Milling, Drilling and Boring Machines with or without Automatic Control

BS EN 12348:2000+A1:2009 立式岩心钻机.安全性

This European Standard applies to core drilling machines on transportable stands equipped with a diamond core drill bit, usually with a water supply connection device, and intended to drill holes into stone, concrete and similar mineral materials in a stationary position where the power for the tool rotation is supplied by an electrical, hydraulic, pneumatic or internal combustion prime motor. The feed movement of the drill head and core drill bit may be effected by manual, mechanical or hydraulic means. This European Standard deals with all significant hazards pertinent to core drilling machines on a stand when used as intended and under the conditions foreseen by the manufacturer (see clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. This standard does not apply to:  percussive or rotary-percussive rock drills either mounted or unmounted;  hand held power drills;  hydraulic or pneumatic power supply sources;  mobile undercarriages to which machines can be fitted. This European Standard does not apply to machinery covered by EN 791:1995. This European Standard covers electrical hazards by making reference to relevant European Standards (see 5.2). Those hazards that are relevant for all mechanical, electrical, hydraulic and other equipment of machinery and that are dealt with in standards for common use are not covered by this European Standard. Reference to pertinent standards of this kind is made where such standards are applicable and so far as is necessary. In this European Standard, core drilling machines on a stand are called "machines" and diamond core drill bits are called “tools”. NOTE The term "diamond" is used as a generic word which covers all varieties of abrasive products such as diamond, borum nitride. This European Standard applies primarily to machines which are manufactured after the date of approval of the standard by CEN.

Core drilling machines on a stand - Safety

BS ISO 3686-2:2000 带垂直主轴固定高度工作台的高准确度六角和单轴坐标钻床和镗床的试验条件.准确度的试验.带移动工作台的轻便式机床

This part of ISO 3686 specifies, with reference to ISO 230-1, both geometric tests and machining tests on vertical spindle, portal type coordinate drilling and boring machines. It also specifies the applicable tolerances corresponding to the above-mentioned tests. It should be noted that, besides drilling and boring operations, it may be possible to carry out light milling operations with these machines. However, this part of ISO 3686 does not deal with jig boring machines or machining centres. This part of ISO 3686 deals only with the verification of accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor the machine characteristics (such as speeds, feeds, etc.), which should generally be carried out before testing the accuracy. This part of ISO 3686 provides the terminology used for the principle components of the machine and indicates the designation of the axes in accordance with ISO 841.

Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle - Testing of the accuracy - Portal type machines with moving table

BS ISO 3686-1:2000 带垂直主轴固定高度工作台的高准确度六角和单轴坐标钻床和镗床的试验条件.准确度的试验.单柱式机床

This part of ISO 3686 specifies, with reference to ISO 230-1; both geometric tests and machining tests on vertical spindle, single column type coordinate drilling and boring machines. It also specifies the applicable tolerances corresponding to the above-mentioned tests. It should be noted that, besides drilling and boring operations, it may be possible to carry out light milling operations with these machines. However, this part of ISO 3686 does not deal with jig boring machines or machining centres. This part of ISO 3686 deals only with the verification of the accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, the stick-slip motion of components, etc.), nor the machine characteristics (such as speeds, feeds, etc.), which should generally be carried out before testing the accuracy. This part of ISO 3686 provides the terminology used for the principle components of the machine and indicates the designation of the axes in accordance with ISO 841.

Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle - Testing of the accuracy - Single column type machines

DLA A-A-59395-2000 地板固定摇臂钻床 [代替:DLA MIL-D-80262 B CANC 通告 1,DLA MIL-D-80262 B(1),DLA MIL-D-80262 B,DLA MIL-D-80262 A(2),DLA MIL-D-80262 A,DLA MIL-D-80262 (2),DLA MIL-D-80262 (1),DLA MIL-D-80262]

This commercial item description (CID) covers floor-mounted, radial drilling machines intended for use in general-purpose drilling, tapping, boring, counterboring, spot facing, and reaming operations on large andíor heavy workpieces.

DRILLING MACHINE, RADIAL, FLOOR-MOUNTED [Superseded: DLA MIL-D-80262 B CANC NOTICE 1, DLA MIL-D-80262 B (1), DLA MIL-D-80262 B, DLA MIL-D-80262 A (2), DLA MIL-D-80262 A, DLA MIL-D-80262 (2), DLA MIL-D-80262 (1), DLA MIL-D-80262]

DLA A-A-59396-2000 升降台型水平和垂直联合铣床 [代替:DLA MIL-M-80033 D CANC 通告 1,DLA MIL-M-80033 D,DLA MIL-M-80033 C,DLA MIL-M-80033 B,DLA MIL-M-80033 A,DLA MIL-M-80033 (1),DLA MIL-M-80033]

This commercial item description (CID) covers horizontal and vertical spindle, knee milling machines intended for use in conventional milling operations.

MILLING MACHINE, COMBINATION HORIZONTAL AND VERTICAL, KNEE TYPE [Superseded: DLA MIL-M-80033 D CANC NOTICE 1, DLA MIL-M-80033 D, DLA MIL-M-80033 C, DLA MIL-M-80033 B, DLA MIL-M-80033 A, DLA MIL-M-80033 (1), DLA MIL-M-80033]

JIS B 6226:1999 床身式卧式铣床.精度检验

Bed type horizontal milling machines -- Testing of the accuracy

JIS B 6225:1999 床身式立式铣床.精度检验

Bed type vertical milling machines -- Testing of the accuracy