J70 通用机械与设备综合 标准查询与下载

JB/T 12491-2015 喷射设备名词术语

本标准规定了喷射设备常用的名词术语。本标准适用于喷射设备的设计、制造、贸易，制定其他相关标准，编写有关技术文件与报告，编写或翻译书籍文献、教材、样本以及进行技术交流。

Terminology for jet equipment

JB/T 12495-2014 电站空冷机组清洗装置

Power station air cooling unit cleaning device

JB/T 12495-2015 电站空冷机组清洗装置

本标准规定了电站空冷机组清洗装置的术语和定义、构成、型号、形式、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于额定排出压力为8 MPa~15 MPa，工作介质为常温除盐水的电站空冷机组清洗装置(以下简称清洗装置)。

Cleaning devices for power plant air cooling condenser units

JB/T 12494-2015 热轧用除鳞喷嘴

本标准规定了热轧用除鳞喷嘴(以下简称喷嘴)的术语和定义、型式、标记、要求、试验方法、检验规则、标志、包装和贮存。本标准适用于以水为介质的热轧、热拔、热挤压、顶锻用除鳞喷嘴。

Descaling nozzle for hot rolling

JB/T 12491-2014 喷射设备名词术语

Jet equipment terminology

JB/T 12493-2014 连铸用气水喷嘴

Air-water nozzle for continuous casting

JB/T 12492-2015 连铸用水喷嘴

本标准规定了连铸用水喷嘴(以下简称喷嘴)的术语和定义、分类、型号标记、要求、试验方法、检验规则、标志、包装和贮存。本标准适用于冶金行业的连铸二次冷却用水喷嘴。

Water nozzle for Continuous casting

JB/T 12493-2015 连铸用气水喷嘴

本标准规定了连铸用气水喷嘴(以下简称喷嘴)的术语和定义、分类、型号标记、要求、试验方法、检验规则、标志、包装和贮存。本标准适用于冶金行业的连铸二次冷却用气水喷嘴，尤其适用于特殊钢种连铸的二次冷却。

Air & water spraying nozzle for continuous casting

JB/T 12494-2014 热轧用除鳞喷嘴

Descaling nozzle for hot rolling

JB/T 12492-2014 连铸用水喷嘴

Continuous casting water nozzle

KS B ISO 12140:2015 农业机械.农用挂车和拖挂设备.牵引杆插孔

Agricultural machinery — Agricultural trailers and trailed equipment — Drawbar jacks

EN 16474:2015 塑料和橡胶机器.轮胎固定机器.安全要求

This European Standard applies to tyre curing machines having the following configuration.- crossing flow tyre curing machines, with two cavities with; - common curing cycle and common safeguarding; or; - independent curing cycles and common safeguarding; or; - independent curing cycles and independent safeguarding; - tyre curing machines with one cavity; - tyre curing machines with automatic rear feeding and discharge. The safety requirements and/or protective measures specified in this European Standard apply to tyre curing machines for passenger vehicle tyres and truck tyres. This European Standard does not deal with; - feeding system and discharge system; - tyre curing machines with manual loading of the green tyre into the mould and manual unloading of the cured tyre from the mould; - ancillary equipment which is not an integral part of the tyre curing machine, e. g. conveying equipment; - exhaust systems. This European Standard deals with all significant hazards, hazardous situations and events relevant to tyre curing machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. It does not deal with hazards associated with falling of parts of the container or mould. Some tyre curing machines include pressure vessels, which fall under Directive 97/23/EC; this European standard is not intended to support the Directive 97/23/EC. This European Standard is not applicable to tyre curing machines which are manufactured before the date of its publication as an EN.

Plastics and rubber machines - Tyre curing machines - Safety requirements

ASME PTC 46-2015 全部设备性能

This Code applies to any plant size. It can be used to measure the performance of a plant in its normal operating condition, with all equipment in a clean and fully functional condition. This Code provides explicit methods and procedures for combined cycle power plants and for most gas, liquid, and solid fueled Rankine cycle plants. There is no intent to restrict the use of this Code for other types of heat cycle power plants, providing the explicit procedures can be met. For example, the performance equations and test methods herein are applicable to the steam cycle portion of a solar plant, or of a nuclear plant steam cycle. Refer to ASME PTC 47 for power block thermal performance test procedures associated with an IGCC plant (Integrated Gasification Combined Cycle). This Code does not apply to component testing, for example, gas turbines (ASME PTC 22) or steam turbines (ASME PTC 6 or ASME PTC 6.2) or other individual components. To test a particular power plant or cogeneration facility in accordance with this Code, the following must be met: (a) a means must be available to determine, through either direct or indirect measurements, all of the heat inputs entering the test boundary and all of the electrical power and secondary outputs leaving the test boundary; (b) a means must be available to determine, through either direct or indirect measurements, all of the parameters to correct the results from the test to the base reference condition; (c) the test result uncertainties should be less than or equal to the uncertainties given in subsection 1-3 for the applicable plant type; and (d) the working fluid for vapor cycles must be steam. This restriction is imposed only to the extent that other fluids may require measurements or measurement methods different from those provided by this Code for steam cycles. Tests addressing other power plant performance-related issues are outside the scope of this Code. These include the following: (a) emissions tests: testing to verify compliance with regulatory emissions levels (e.g., airborne gaseous and particulate, solid and wastewater, noise, etc.), or required for calibration and certification of emission-monitoring systems. (b) operational demonstration tests: the various standard power plant tests typically conducted during startup, or periodically thereafter, to demonstrate specified operating capabilities (e.g., minimum load operation, automatic load control and load ramp rate, fuel switching capability, etc.). (c) reliability tests: tests conducted over an extended period of days or weeks to demonstrate the capability of the power plant to produce a specified minimum output level or availability. The measurement methods, calculations, and corrections to design conditions included herein may be of use in designing tests of this type; however, this Code does not address this type of testing in terms of providing explicit testing procedures or acceptance criteria.

Overall Plant Performance

GOST R 56477-2015 能源效率. 独立无轴封循环器. 将能源效率循环泵告知消费者

Energy efficiency. Glandless stand alone circulators. Informing of consumers about energy efficiency of circulations

GOST EN 16297-3-2015 能源效率. 无填料循环器. 第3部分: 作为其他产品零件的循环器的能源效率指数 (EEI)

Energy effectiveness. Glandless circulators. Part 3: Energy effectiveness index (EEI) for circulators being a part of other products

GOST R 56624-2015 能源效率. 石油开采用潜水式叶片泵和电动机. 能源效率等级

Energy efficiency. Submersible bladed pumps and electric motors for oil production. Energy efficiency classes

KS B ISO 12508:2014 土方机械.司机操作和维修空间.棱角倒钝

Earth-moving machinery — Operator station and maintenance areas — Bluntness of edges

KS B ISO 11862:2014 土方机械.辅助起动示意信号电联结器

Earth-moving machinery — Auxiliary starting aid electrical connector

KS B ISO 11375:2014 建筑物用建筑机械和设备.术语和定义

Building construction machinery and equipment — Terms and definitions

KS B ISO 15817:2014 土方机械.远程驾驶员控制系统的安全要求

Earth-moving machinery — Safety requirements for remote operator control systems