J74 压力容器 标准查询与下载
共找到 1987 条与 压力容器 相关的标准，共 133 页
Technical Guidelines for Manufacturing Supervision and Inspection of Skid-Mounted Pressure-Containing Equipment Systems
- ICS
- 13.100
- CCS
- J74
- 发布
- 2022-06-10
- 实施
- 2022-07-01
Technical specification for low-nitrogen transformation of gas-fired boilers (facilities)
- ICS
- 23.020.30
- CCS
- J74
- 发布
- 2022-01-29
- 实施
- 2022-04-29
This document specifies the minimum requirements for the materials, design, construction and workmanship, manufacturing processes, examinations and testing at time of manufacture for refillable, seamless, stainless steel gas cylinders with water capacities up to and including 150 l. It is applicable to cylinders for compressed, liquefied and dissolved gases with a maximum actual tensile strength, Rma, of less than 1100 MPa. NOTE If so desired, cylinders of water capacity between 150 l and 450 l can be manufactured to be in full conformance to this document.
Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 4: Stainless steel cylinders with an Rm value of less than 1100 MPaj74
- ICS
- CCS
- J74
- 发布
- 2021-11-00
- 实施
This document gives guidance on the selection and evaluation of compatibility between non-metallic materials for gas cylinders and valves and the gas contents. It is also applicable to tubes, pressure drums and bundles of cylinders. This document covers composite and laminated materials used for gas cylinders. It does not include ceramics, glasses and adhesives. This document considers the influence of the gas in changing the material and mechanical properties (e.g. chemical reaction or change in physical state). The basic properties of the materials, such as mechanical properties required for design purposes (normally available from the materials supplier), are not considered. Other aspects, such as quality of delivered gas, are not considered. The compatibility data given are related to single component gases but can be applicable to gas mixtures. This document does not apply to cryogenic fluids (this is covered in ISO 21010).
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
- ICS
- CCS
- J74
- 发布
- 2021-10-00
- 实施
本文件规定了工业管道的编码规则、编码对象、代码结构和组成、编码符号表示。
Coding rules and symbols for industrial piping
- ICS
- 23.040
- CCS
- J74
- 发布
- 2021-09-25
- 实施
- 2021-10-01
This Standard specifies the requirements for design, specification and type testing for dedicated LPG self-closing cylinder valves specifically for use with transportable refillable LPG cylinders from 0,5 l up to 150 l water capacity. It includes references to associated equipmen
Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (ISO 14245:2021); German version EN ISO 14245:2021
- ICS
- CCS
- J74
- 发布
- 2021-09-01
- 实施
This document specifies the requirements for periodic inspection and testing to verify the integrity of cylinders and tubes to be re-introduced into service for a further period of time.
Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing (ISO 18119:2018 + Amd.1:2021); German version EN ISO 18119:2018 + A1:2021
- ICS
- CCS
- J74
- 发布
- 2021-09-01
- 实施
Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated
- ICS
- CCS
- J74
- 发布
- 2021-06-23
- 实施
- 2021-09-04
This document specifies the requirements for design, specification, type testing and production testing and inspection for dedicated LPG self-closing cylinder valves for use with and directly connected to transportable refillable LPG cylinders. It also includes requirements for associated equipment for vapour and liquid service. Bursting discs and/or fusible plugs are not covered in this document. Annex A identifies requirements for production testing and inspection. This document excludes other LPG cylinder devices which are not an integral part of the dedicated selfclosing cylinder valve. This document does not apply to cylinder valves for fixed automotive installations and ball valves. NOTE For manually operated LPG cylinder valves see ISO 15995. For cylinder valves for compressed, dissolved and other liquefied gases see ISO 10297, ISO 17871 or ISO 17879.
Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing
- ICS
- CCS
- J74
- 发布
- 2021-06-01
- 实施
This document specifies definitions, dimensions and tolerances of parallel screw threads of M30 x 2, M25 x 2 and M18 x 1,5, for the connection of valves to medical and industrial gas cylinders. This document does not contain the connection requirements for: — mechanical strength; — gas tightness; — capability of repeated assembly and dismounting operations (this aspect is covered in ISO 13341).
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification
- ICS
- CCS
- J74
- 发布
- 2021-05-00
- 实施
This standard applies to cylinder valves according to DIN EN ISO 10297 for compressed, liquefied and dissolved gases and specifies the requirements for inlet and outlet connections of cylinder valves rated for cylinder test pressures up to and including 300 bar, if not otherwise
Gas cylinder valves for cylinder test pressures up to 300 bar - Valve inlet and outlet connections
- ICS
- 23.060.40
- CCS
- J74
- 发布
- 2021-04-01
- 实施
Rules for periodic inspection of steel seamless gas storage cylinders for station use
- ICS
- 23.020.30
- CCS
- J74
- 发布
- 2021-02-20
- 实施
- 2021-05-20
Pneumatic cylinders for mechanized multiple spot welding
- ICS
- 25.160.30
- CCS
- J74
- 发布
- 2021-01-13
- 实施
- 2021-05-21
BS ISO 11119-3:2020 气瓶. 可二次填充的混合气瓶和导管的设计,安装和测试. 第3部分: 容量不高于450 L带非负载分配金属或非金属衬层或无衬层的完全包装纤维增强复合材料气瓶和管道
Gas cylinders. Design, construction and testing of refillable composite gas cylinders and tubes. Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners
- ICS
- CCS
- J74
- 发布
- 2021-01-08
- 实施
- 2021-01-08
1.1?This specification covers direct buried underground pre-insulated, hot water piping systems with an upper temperature limit of 250 ��F (121 ��C) used to convey pressurized fluids for district heating. In the pre-insulated pipe industry and in this standard, this temperature
Standard Specification for Direct Buried Pre-Insulated and Jacketed Polyurethane Bonded Low Temperature Hot Water Piping Systems
- ICS
- 91.140
- CCS
- J74
- 发布
- 2021
- 实施
LPG equipment and accessories. Welded steel pressure vessels for LPG road tankers. Design and manufacture
- ICS
- CCS
- J74
- 发布
- 2020-12-23
- 实施
- 2020-12-23
Carbon steel plates for pressure vessels for intermediate and moderate temperature services
- ICS
- 77.140.30
- CCS
- J74
- 发布
- 2020-12-21
- 实施
Le présent document spécifie les exigences minimales relatives aux matériaux, à la conception, à la construction et aux procédures de fabrication, ainsi que les essais des réservoirs sous pression soudés de camions-citernes utilisés pour le transport du GPL et de leurs accessoire
LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
- ICS
- CCS
- J74
- 发布
- 2020-12-16
- 实施
- 2021-02-20
Gas cylinders. Design, construction and testing of refillable composite gas cylinders and tubes. Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
- ICS
- CCS
- J74
- 发布
- 2020-11-27
- 实施
- 2020-11-27
Gas cylinders. Design, construction and testing of refillable composite gas cylinders and tubes. Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
- ICS
- CCS
- J74
- 发布
- 2020-11-26
- 实施
- 2020-11-26
