J77 分离机械 标准查询与下载

JB/T 6418-2010 分离机械 清洁度测定方法

本标准规定了测定分离机械清洁度的基本原则、要求和方法。 本标准适用于分离机械液压系统的零件、部件、系统及相关产品的清洁度检测。其他系统产品也可参照执行。

Separating machine.Measurement method of cleanliness

JB/T 8101-2010 离心卸料离心机

本标准规定了离心卸料离心机的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于离心卸料离心机(以下简称离心机)。

Slip-discharge screen centrifuge

JB/T 5282-2010 翻盘真空过滤机

本标准规定了翻盘真空过滤机的型式和基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存等要求。 本标准适用于连续操作的翻盘真空过滤机。

Tilting-pan vacuum filter

JB/T 7243-2010 离心萃取机型号编制方法

本标准规定了离心萃取机(以下简称萃取机)的型号编制方法。

The model designation of centrifugal extractor

JB/T 8865-2010 活塞推料离心机用滤网

本标准规定了活塞推料离心机转鼓中滤网的产品分类、型式与基本参数、技术要求、检验方法与验收规则、标志、包装、运输和贮存。 本标准适用于活塞推料离心机用焊接式条网、串接式条网和铣制板网(以下简称滤网)。

Screen for pusher centrifuge

JB/T 10966-2010 PT型圆盘真空过滤机

本标准规定了PT型圆盘真空过滤机的型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于PT型圆盘真空过滤机(以下简称过滤机)。

PT Model rotary vacuum disc filter

JB/T 8866-2010 筒式加压过滤机

本标准规定了筒式加压过滤机的术语、型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于筒式加压过滤机(以卜简称过滤机)。

Cartridge pressure filter

JB/T 5284-2010 隔爆型刮刀卸料离心机

本标准规定了隔爆型刮刀卸料离心机的型式与基本参数、技术要求、试验方法、检验规则标志、包装、运输和贮存。 本标准适用于隔爆型刮刀卸料离心机。

Explosion-proof peeler centrifuge

BS EN 1822-2:2009 高效空气过滤器(HEPA和ULPA).气溶胶产品、测量设备、颗粒计数统计

This European Standard applies to efficient particulate air filters (EPA), high efficiency particulate air filters (HEPA) and ultra low penetration air filters (ULPA) used in the field of ventilation and air conditioning and for technical processes, e.g. for applications in clean room technology or pharmaceutical industry. It establishes a procedure for the determination of the efficiency on the basis of a particle counting method using a liquid (or alternatively a solid) test aerosol, and allows a standardized classification of these filters in terms of their efficiency, both local and integral efficiency. This European Standard describes the measuring instruments and aerosol generators used in the course of this testing. With regard to particle counting it specifies the statistical basis for the evaluation of counts with only small numbers of counted events.

High efficiency air filters (EPA, HEPA and ULPA) - Aerosol production, measuring equipment, particle counting statistics

NF X44-014-2:2010 高效空气过滤器(EPA,HEPA和ULPA).第2部分:烟雾剂制品、测量设备和粒子计数统计

High efficiency air filters (EPA, HEPA and ULPA) - Part 2 : aerosol production, measuring equipment, particle counting statistics.

NF X44-014-3:2010 高效空气过滤器(EPA,HEPA和ULPA).第3部分:平板过滤器介质试验

High efficiency air filters (EPA, HEPA and ULPA) - Part 3 : testing flat sheet filter media.

NF X44-014-1:2010 高效气体过滤器(EPA,HEPA和ULPA).第1部分:分类、性能试验和作标记

High efficiency air filters (EPA, HEPA and ULPA) - Part 1 : classification, performance testing, marking.

NF X44-014-5:2010 高效空气过滤器(EPA,HEPA和ULPA).第5部分:过滤器芯件效率的测定

High efficiency air filters (EPA, HEPA and ULPA) - Part 5 : determining the efficiency of filter elements.

ASTM D6161-10 微量过滤、超滤、纳米过滤以及反渗透膜工艺的标准术语

The need to understand the relationships found in membrane unit processes for water treatment increases with the continuing demand for these separation systems. Defining the terms common to microfiltration, ultrafiltration, nanofiltration and reverse osmosis processes assist the manufacturer, consultant and end-user in eliminating inter-process terminology confusion. This standard expands the definitions found in Terminology D1129.1.1 This terminology covers the use of microfiltration, ultrafiltration, nanofiltration and reverse osmosis for membrane separation processes.

Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis Membrane Processes

ASTM D7670-10 用膜过滤器处理颗粒污染使用中液体试样的规程

This practice provides for the processing of liquid samples. It will provide the optimum sample processing for visual contamination methods such as Test Methods F312.1.1 This practice covers the processing of in-service fluids in preparation for particulate contamination analysis using membrane filters and is limited only by the liquid-to-membrane filter compatibility. 1.2 The practice covers the procedure for filtering a measured volume of liquid through a membrane filter. When this practice is used, the particulate matter will be randomly distributed on the filter surface for subsequent contamination analysis methods. 1.3 The practice describes procedures to allow handling particles in the size range between 2 and 1000 μm with minimum losses during handling. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters

ASTM D7670-10(2017) 利用膜滤器处理微粒污染分析用在用液体样品的标准实施规程

4.1 This practice provides for the processing of liquid samples. It will provide the optimum sample processing for visual contamination methods such as Test Methods F312. 1.1 This practice covers the processing of in-service fluids in preparation for particulate contamination analysis using membrane filters and is limited only by the liquid-to-membrane filter compatibility. 1.2 The practice covers the procedure for filtering a measured volume of liquid through a membrane filter. When this practice is used, the particulate matter will be randomly distributed on the filter surface for subsequent contamination analysis methods. 1.3 The practice describes procedures to allow handling particles in the size range between 28201;µm and 10008201;μm with minimum losses during handling. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters

ISO 12500-4:2009 压缩空气过滤器.试验方法.第4部分:水

Filters for compressed air - Methods of test - Part 4: Water

BS ISO 12500-3:2009 压缩空气过滤器.试验方法.微粒物质

Filters for compressed air - Test methods - Particulates

DIN EN 12547:2009 离心机.通用安全性要求(包括修改件A1-2009).英文版本DIN EN 12547-2009-09

1.1 This European Standard applies to centrifuges aiming at separation of liquidlliquidlsolid/solid or at least two of these substances. It gives requirements to minimise the risks caused by the hazards specified in 1.2. The Standard deals with the significant hazards associated with the operation of centrifuges. 1.2 The Standard gives requirements for minimising the risks caused by the following hazards: -- mechanical hazards common to all types of centrifuges, except those specified in 1.3; -- ergonomical hazards; -- electrical hazards. The standard also covers requirements for noise measurements. 1.3 Types of centrifuges and hazards excluded 1.3.1 Types of centrifuges excluded: -- centrifuges with a kinetic energy of rotation less than 200 Joule; -- centrifuges designated by their manufacturers for domestic use; -- centrifuges designated by their manufacturers as laboratory centrifuges according to EN 61010-2-020, including Amendment 1 ; -- centrifuges designated by their manufacturers for forming, i.e. centrifugal hot metal casting machines. 1.3.2 Hazards excluded: -- thermal hazards; -- hazards specific to processing radioactive products; -- hazards specific to microbiological processing - including viral and parasitic hazards; -- hazards from processing corrosive and/or erosive materials; -- hazards from processes involving flammable or explosive substances; -- hazards caused by leakage of hazardous substances; -- hazards caused by unsuitable hygienic design for applications involving food products; -- other application specific hazards which must be dealt with, either according to application specific standards (e.g. EN 12505 ), or EN 292. 1.4 This standard applies to centrifuges which are manufactured after the date of issue of this standard.

Centrifuges - Common safety requirements (includes Amendment A1:2009); English version of DIN EN 12547:2009-09

ISO 12500-3:2009 压缩空气过滤器.试验方法.第3部分:微粒

Filters for compressed air - Test methods - Part 3: Particulates