J81 输送机械 标准查询与下载
共找到 896 条与 输送机械 相关的标准，共 60 页
Belt conveyor hydraulic tensioning device
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2019-08-27
- 实施
- 2020-04-01
本标准规定了螺旋输送机的基本参数，计算基本原则，技术要求，试验方法，检验规则，标志、包装和贮运。 本标准适用于水平和徽倾斜(15°以下)连续均匀输送松散物料的螺旋输送机。其工作环境温度为-20～+40℃，输送物料温度为-20～+80℃。
screw conveyor
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2019-08-27
- 实施
- 2020-04-01
Belt conveyor hydraulic tensioning device
- ICS
- 53.040.10
- CCS
- J81
- 发布
- 2019-08-02
- 实施
- 2020-04-01
Glossary of terms relating to conveyor
- ICS
- 01.040.53;53.040.10
- CCS
- J81
- 发布
- 2019-02-20
- 实施
Light conveyor belts -- Tolerances on widths and lengths of cut light conveyor belts
- ICS
- 53.040.20
- CCS
- J81
- 发布
- 2018-09-20
- 实施
This document specifies three methods for the measurement of total belt thickness and the thickness of covers of steel cord conveyor belts. Methods A1 and A2 (micrometer methods) can be used for all steel cord conveyor belts for the measurement of both total belt thickness and cover thickness. Method B (optical method) is intended for the measurement of cover thickness only. It is not suitable if there is a textile or metal weft, nor if the ends of the steel cords become twisted when cut.
Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness
- ICS
- 53.040.20
- CCS
- J81
- 发布
- 2018-05-01
- 实施
本标准规定了全自动分瓶分道器的术语和定义；型号、型式与基本参数及工作条件；技术要求；试验方法；检验规则；标志、包装、运输与贮存。 本标准适用于圆、方、异形容器等包装物（以下简称为包装物，单位为件），进行单道分多道的全自动分瓶分道器（以下简称分道器），主要应用于食品、啤酒、饮料、医药、日化等行业。
Automatic bottle divider
- ICS
- 01.040.21
- CCS
- J81
- 发布
- 2017-10-25
- 实施
- 2018-01-25
This document specifies the marking of conveyor belts, i.e. — the indications to be marked; — the dimensions of the marks; — the position of the marks. This document does not apply to light conveyor belts as described in ISO 21183-1.
Conveyor belts - Marking
- ICS
- 53.040.20
- CCS
- J81
- 发布
- 2017-10-01
- 实施
This document specifies a method of test for the measurement of the propagation resistance of an initial tear in textile conveyor belts, either in full thickness or of the carcass only. This test is intended for application to textile belts in installations where there is a risk of longitudinal tearing.
Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts
- ICS
- 53.040.20
- CCS
- J81
- 发布
- 2017-10-01
- 实施
本标准规定了额定起重量为0.5～10t平衡重式叉车的技术要求。 本标准适用于额定起重量为0.5～10t内燃平衡重式叉车和0.5～4t蓄电池平衡重式叉车。
500 kg~10 000 kg ride-on counterbalanced forklift
- ICS
- CCS
- J81
- 发布
- 2017-07-01
- 实施
- 2017-07-01
Steel cord conveyor belts. Special safety requirements for belts for use in underground installations
- ICS
- 53.040.20
- CCS
- J81
- 发布
- 2017-06-28
- 实施
- 2017-06-28
Conveyor belts - Transverse flexibility (troughability) - Test method (ISO 703:2017); German version EN ISO 703:2017
- ICS
- 53.040.20
- CCS
- J81
- 发布
- 2017-06
- 实施
Steel cord conveyor belts - Part 2: Preferred belt types (ISO 15236-2:2017); German version EN ISO 15236-2:2017
- ICS
- 53.040.20
- CCS
- J81
- 发布
- 2017-06
- 实施
Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2016); German version EN ISO 15236-1:2016
- ICS
- 53.040.20
- CCS
- J81
- 发布
- 2017-03
- 实施
Steel cord conveyor belts - Part 3: Special safety requirements for belts for use in underground installations
- ICS
- 53.040.20
- CCS
- J81
- 发布
- 2017-03
- 实施
Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2016); German version EN ISO 9856:2016
- ICS
- 53.040.20
- CCS
- J81
- 发布
- 2017-03
- 实施
Conveyor belts. Transverse flexibility (troughability). Test method
- ICS
- 53.040.20
- CCS
- J81
- 发布
- 2017-01-31
- 实施
- 2017-01-31
Steel cord conveyor belts. Preferred belt types
- ICS
- 53.040.20
- CCS
- J81
- 发布
- 2017-01-31
- 实施
- 2017-01-31
