J87 印刷机械 标准查询与下载

JB/T 9124.1-2004 平型网版印刷机.第1部分:平台式平型网版印刷机

本部分规定了平台式平型网版印刷机的型式与基本参数、要求、试验方法、检验规则及标志、包装、运输、贮存。 本部分适用于手工送料型及半自动型平台式平型网版印刷机。

Planographic screen-process press Part 1: flat-type planographic screen-process press

JB/T 10481-2004 单张纸凹版印刷机

本标准规定了单张纸凹板印刷机的基本参数、要求、试验方法、检验规则及标志、包装、储存与运输等要求。 　　本标准适用于单张纸单色凹版印刷机。

Sheet-fed gravure press

JB/T 10452-2004 办公设备.文本装订机

本标准规定了办公用文本装订机的技术要求、试验方法、检验规则和标志、包装、运输、贮存的要求。 　　本标准主要适用于热压式、塑管式、胶圈式、铁圈式、热熔式等常见文本装订机，其他文本装订机可参照执行。

Office Equipment Book Binding Machine

JB/T 10455-2004 小胶印机测试版

本标准规定了办公机械胶印机械测试版的技术要求、试验方法、检验规则和标志、包装、运输、贮存的要求。 　　本标准适用于有效印刷幅面A2(594mm×420mm)、A3(420mm×297mm)及其以下的办公机械小胶印机。

Test chart for offset machine

BS EN 1010-4:2004+A1:2009 机械安全性.设计和生产打印机和纸加工机的安全性要求.装订机、纸加工机和装饰机

This document applies to ? bookbinding machines: ? stitching, riveting, eyeletting and attaching machines; ? gang stitchers; ? gathering machines; ? perfect binders; ? paper drills; ? book signature presses; ? book presses; ? sheet folding machines; ? book production lines for the production of books with hard covers; ? back rounding and pressing machines; ? backlining and head banding machines; ? casing-in machines; ? book cover crease forming machines. ? paper converting machines: ? machines for the production of envelopes; ? machines for the production of sanitary items; ? inserting machines; ? counter-stackers; ? paper embossing machines. ? paper finishing machines: ? coaters; ? laminators. This document shall be used together with !EN 1010-1:2004+A1". Both parts together identify all significant hazards relevant to bookbinding, paper converting and paper finishing machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements in EN 1010-4 take precedence over respective requirements in !EN 1010-1:2004+A1". This document does not deal with risks generated by noise emitted from the machines. These issues are covered basically in !EN 1010-1:2004+A1". However, for machines like sheet folding machines and machines for the production of envelopes and sanitary items, some specific proposals for noise reduction measures are given. This document is not applicable to bookbinding, paper converting and finishing machines manufactured before the date of publication of this document by CEN.

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Bookbinding, paper converting and finishing machines

BS EN 1010-4:2004 机械安全.设计和生产打印机和纸加工机的安全要求.装订机、纸加工机和装饰机

This document applies to — bookbinding machines: — stitching, riveting, eyeletting and attaching machines; — gang stitchers; — gathering machines; — perfect binders; — paper drills; — book signature presses; — book presses; — sheet folding machines; — book production lines for the production of books with hard covers; — back rounding and pressing machines; — backlining and head banding machines; — casing-in machines; — book cover crease forming machines. — paper converting machines: — machines for the production of envelopes; — machines for the production of sanitary items; — inserting machines; — counter-stackers; — paper embossing machines. — paper finishing machines: — coaters; — laminators. This document shall be used together with prEN 1010-1:2003. Both parts together identify all significant hazards relevant to bookbinding, paper converting and paper finishing machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements in EN 1010-4 take precedence over respective requirements in prEN 1010-1:2003. This document does not deal with risks generated by noise emitted from the machines. These issues are covered basically in prEN 1010-1:2002. However, for machines like sheet folding machines and machines for the production of envelopes and sanitary items, some specific proposals for noise reduction measures are given. This document is not applicable to bookbinding, paper converting and finishing machines manufactured before the date of publication of this document by CEN.

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Bookbinding, paper converting and finishing machines

ANSI/ASME B5.61-2003 通用单动直边式动力压力机

This Standard applies to hydraulic and mechanical power presses commonly referred to by the metalworking industry as GENERAL PURPOSE, SINGLE ACTION, STRAIGHT SIDE TYPE POWER PRESSES that, by means of dies or tooling attached to the slide and bolster, are used to shear, punch, form or assemble metal or other materials.

Power Presses - General Purpose Single Action Straight Side Type

ISO 2834:1999/Cor 1:2003 印刷技术.用于胶印和凸印油墨测试印样的制备.技术勘误1

Graphic technology - Test print preparation for offset and letterpress inks; Technical Corrigendum 1

ISO 12648:2003 图形技术.印刷机系统的安全要求

Graphic technology - Safety requirements for printing press systems

BS EN 1010-3:2002 机械安全.印刷和纸加工机械的设计和制造的安全要求.切纸机

1 This European Standard applies to cutting machines used in paper converting: - guillotines; - three-knife trimmers; - index cutting machines; - trimmers; - rotary cutters; - round cornering machines; - label punching machines. This European Standard is only applicable in conjunction with prEN 1010-1. Both parts together identify all significant hazards relevant to the cutting machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The specific requirements of this European Standard take precedence over respective requirements of prEN 1010-1. This European Standard is not applicable to cutting machines manufactured before the publication of this European Standard by CEN. 2 This standard does not apply to winder-slitters or sheeters (see EN 1034-1, EN 1034-3, prEN 1034-5).

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Cutting machines

BS EN 1010-3:2002+A1:2009 机械安全性.印刷和纸加工机械的设计和制造的安全性要求.切纸机

1.1 This European Standard applies to cutting machines used in paper converting: - guillotines; - three-knife trimmers; - index cutting machines; - trimmers; - rotary cutters; - round cornering machines; - label punching machines. This European Standard is only applicable in conjunction with !EN 1010-1:2004+A1". Both parts together identify all significant hazards relevant to the cutting machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The specific requirements of this European Standard take precedence over respective requirements of !EN 1010-1:2004+A1". This European Standard is not applicable to cutting machines manufactured before the publication of this European Standard by CEN. 1.2 This standard does not apply to winder-slitters or sheeters (see EN 1034-1, EN 1034-3, prEN 1034-5).

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Cutting machines

BS EN 1010-3:2003 机械安全.印刷和纸加工机械的设计和制造的安全要求.切纸机

1 This European Standard applies to cutting machines used in paper converting: - guillotines; - three-knife trimmers; - index cutting machines; - trimmers; - rotary cutters; - round cornering machines; - label punching machines. This European Standard is only applicable in conjunction with prEN 1010-1. Both parts together identify all significant hazards relevant to the cutting machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The specific requirements of this European Standard take precedence over respective requirements of prEN 1010-1. This European Standard is not applicable to cutting machines manufactured before the publication of this European Standard by CEN. 2 This standard does not apply to winder-slitters or sheeters (see EN 1034-1, EN 1034-3, prEN 1034-5).

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Cutting machines

ASTM D6846-02 用印刷仪的糊状印刷油墨印刷准备的标准实施规范

Laboratory proofing of inks is necessary to establish a reproducible prediction of print appearance and performance properties, most of which are highly sensitive to ink film thickness. The apparatus described in this practice has found wide use for routine control proofing because it provides an economical method for producing reasonably large prints at film thicknesses comparable to those obtained on production presses. A unique advantage of printing gages is that, depending on the design nbsp;nbsp;nbsp;selected, prints can be produced at a range of tapered film thicknesses or at several levels of uniform thicknesses in a single proofing. Because of the built-in film thickness control, ink metering is not necessary. Relatively small quantities of test samples are used, and less than two minutes are required to ink a gage, pull a letterpress print, and clean up. In addition, problems due to ink distribution systems are eliminated, two inks may be proofed at the same time, and multi-color printing is possible. This practice does not duplicate the dynamics of a high speed press, nevertheless, it is useful for quality control and for specification acceptance between the producer and the user. FIG. 1 Schematic Diagram of Printing Gages (not drawn to scale)1.1 This practice covers the procedure for preparing laboratory prints of paste inks using a printing gage in conjunction with a flat-bed proof press.1.2 This practice is applicable to the preparation of solid-area prints by direct letterpress or by dry offset on a flat substrate such as paper, paperboard, or metal.1.3 This practice is applicable primarily to lithographic and letterpress inks that dry by oxidation or penetration. With the addition of appropriate drying or curing equipment, it is also applicable to other paste ink systems such as heat-set or energy-curable.1.4 The instructions in this practice are intended to minimize the within-print and among-operator variability inherent in hand operations.1.5 This practice features built-in ink film thickness control. It does not measure the film thickness transferred to the print; however, film thickness equivalence may be evaluated by visual or instrumental comparisons of optical density.1.6 Values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautions are given in Section 7.

Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage

ASTM D6846-02(2007) 用印刷仪的糊状印刷油墨印刷准备的标准实施规范

1.1 This practice covers the procedure for preparing laboratory prints of paste inks using a printing gage in conjunction with a flat-bed proof press.1.2 This practice is applicable to the preparation of solid-area prints by direct letterpress or by dry offset on a flat substrate such as paper, paperboard, or metal.1.3 This practice is applicable primarily to lithographic and letterpress inks that dry by oxidation or penetration. With the addition of appropriate drying or curing equipment, it is also applicable to other paste ink systems such as heat-set or energy-curable.1.4 The instructions in this practice are intended to minimize the within-print and among-operator variability inherent in hand operations.1.5 This practice features built-in ink film thickness control. It does not measure the film thickness transferred to the print; however, film thickness equivalence may be evaluated by visual or instrumental comparisons of optical density.1.6 Values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautions are given in Section 7.

Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage

JB/T 10224-2001 粘盒机

本标准规定了粘盒机(自动折叠粘盒机)的主要结构、命名、基本参数、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于单张纸纸板或E型瓦楞纸板的粘盒机。

Folding and gluing machine

JB/T 10225-2001 表格印刷机

本标准规定了表格印刷机的型式和基本参数、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于多功能机组式的表格印刷机,，同时也适用于单功能的表格印刷机的部分功能。

Form printing machine

JB/T 8868-2001 卷筒纸平版印刷机

本标准规定了卷筒纸平版印刷机的基本参数、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于单色和多色(以单面印刷色数计算)卷筒纸平版印刷机。

Web offset

KS B 6874-2000 凹版印刷机滚筒连接用圆锥

이 규격은 그라비어 인쇄기의 판통을 축에 연결할 때 사용하는 테이퍼 콘에 대한 주요 치수를

Taper cone for connecting printing cylinder of gravure printing press

JB/T 10204-2000 小型平版印刷机

　本标准规定了小型平版印刷机的型式及基本参数、技术要求、试验方法、检验规则及标志、包装、贮存与运输。 　　本标准适用于尺寸小于GB/T 15467规定的P64(四开)的单张纸单色和多色平版胶印机。 本标准不适用于办公机械小胶印机。

Small sheet-fed lithographic press

JB/T 8115.2-2000 切纸机.刀片

本标准规定了切纸机刀片的犁式、技术要求、测量方法、榆验规则、标志与包装等。 本标准适用于切纸机所配用的半成品刀片。

Knives for paper cutting machines