J87 印刷机械 标准查询与下载

JB/T 11012-2010 印刷机械 切纸机刀片

本标准规定了切纸机刀片的型式、要求、测量方法、检验规则、标志、包装、运输和贮存。 本标准适用于切纸机所配用的半成品刀片。

Printing machinery.Knives for cutting machines

JB/T 11015-2010 印刷机械 瓦楞纸板卧式平压模切机

本标准规定了瓦楞纸板卧式平压模切机的型式、要求、测量方法、检验规则、标志、包装、运输和贮存。 本标准适用于加工F、E、B、C、A、AB、ABB型和彩裱等瓦楞纸板，采用下输纸结构的卧式平压模切机。

Printing machinery.Flatbed platen type diecutting and creasing machine for corrugated board

JB/T 11016-2010 印刷机械 耗电技术条件

本标准规定了印刷机械耗电技术条件的术语和定义、设备、要求和节电评价。 本标准适用于制版、印刷、印后加工设备及相关辅助设备。

Printing machinery.Technology conditions of power wasting

NF Q79-003-3*NF EN 1010-3+A1:2010 机械安全性.印刷机和纸张加工机的设计和结构用安全要求.第3部分:切纸机

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3 : cutting machines.

ISO 12643-1:2009 印刷技术.印刷技术装置和系统的安全性要求.第1部分:一般要求

Graphic technology - Safety requirements for graphic technology equipment and systems - Part 1: General requirements

BS ISO 12635:2008 印刷技术.胶印印版.尺寸

Graphic technology - Plates for offset printing - Dimensions

JIS X 6931 ERRATUM 1:2009 勘误表

ERRATUM

HJ 472-2009 环境标志产品技术要求-数字式一体化速印机

本标准规定了数字式一体化速印机环境标志产品的术语和定义、基本要求、技术内容及检验方法。 本标准适用于数字式一体化速印机，其他类型的速印机产品可参照使用。

Technical requirement for environmental labeling products Digital stencil duplicator

ANSI/INCITS/ISO/IEC 24734:2009 信息技术.办公设备.数字印刷能力的测量方法

ISO/IEC 24734:2009 provides a method for measuring the productivity of digital printing devices with various office applications and print job characteristics. It is applicable to digital printing devices, including single function printing and multi-function devices, regardless of print technology (e.g. inkjet, laser). Devices can be equipped with a range of paper feed and finishing options either directly connected to the computer system or via a network. It is intended to be used for black and white (B&W) as well as colour digital printing devices.

Information technology - Office equipment - Method for measuring digital printing productivity

ASTM F1423-09 非冲击式个人计算机打印机的单色成像质量测定的标准实施规程

This test target can be used for control or evaluation of the graphic and text output of imaging products or as a research and development tool. This test target can be produced by most non-impact personal computer printers.1.1 This practice utilizes a standard test target that is intended for use as a means of comparing the graphic and text output quality from non-impact personal computer printers. The output may be from ink jet, thermal transfer, or electrostatic imaging devices. 1.2 This target can be used by the end-user as a means of determining the suitability of a non-impact printer for use with commercially available software and a predetermined application. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determination of the Quality of Monochrome Images Produced from Non-Impact Personal Computer Printers

ASTM D7513-09 混合床离子交换墨盒容量的标准试验方法

This test method can be used to evaluate unused mixed bed ion exchange cartridges for conformance to specifications. This test method provides for the calculation of capacity in terms of the volume of water treated to a conductivity end point. The test method as written assumes that the ion exchange resins in the cartridge are either partially or fully converted to the H+ or OH- form. Regeneration of the resins is not part of this method. This test method provides for the calculation of capacity on a cartridge basis. This test method may be used to test different size mixed bed resin cartridges. The flow rate of test water and the frequency of sampling are varied to compensate for the approximate volume of resin in the test cartridge.1.1 This test method covers the determination of the performance of mixed bed ion exchange resin cartridges in the active form when used for deionization. The test can be used to determine the initial capacity of unused cartridges or the remaining capacity of used cartridges. In this case performance is defined as ion exchange capacity (or throughput) to two defined endpoints. The method does not measure organics and does not attempt to determine the ultimate water quality attainable by the cartridge. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges

ISO/TR 15847:2008 印刷技术.印刷机系统和修整系统,包括相关辅助设备的图形符号

Graphic technology - Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment

JB/T 10204-2008 印刷机械.小型单张纸平版印刷机

本标准规定了小型单张纸平版印刷机的型式及基本参数、要求、试验方法、检验规则与标志、包装贮存与运输。 本标准适用于尺寸小于GB/T 15467规定的P64（四开640mm×460mm）的单张纸平版印刷机（以下简称印刷机）。 本标准不适用于办公机械小胶印机。

Printing machinery.Small sheet-fed lithographic press

JB/T 5430-2008 印刷机械.预制感光版冲版机

本标准规定了预制感光板冲版机的产品型号名称、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于铝版基预制感光版卧式冲版机（以下简称冲版机）。

Printing machinery.Presensitzed plate processor

JB/T 9108-2008 印刷机械.预制感光版晒版机

本标准规定了预制感光板晒版机的型式、型号和命名、要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于能够连续完成抽真空、曝光、放气全过程的预制感光板晒版机（以下简称晒版机），不适用于连续晒版机。

Printing machinery.Presensitized plate printing-down machine

JB/T 10873-2008 印刷机械.覆面机

本标准规定了印刷机械覆面机的定义、型式和基本参数、要求、试验方法、检验规则、标志、包装、 运输和贮存。 本标准适用于以纸张作为面层材料，以纸张或单张瓦楞纸板、纸板及类似材料作为底层材料的覆面机。

Printing machinery.Paper laminator

JB/T 10828-2008 单张纸双面平版印刷机

本标准规定了单张纸双面平版印刷机(以下简称印刷机)的术语和定义、基本参数、技术要求、试验方法、检验规则与标志、包装、贮存与运输。 本标准适用于一次走纸完成双面印刷的单张纸平版印刷机。

Sheet-fed offest perfector

JB/T 10824-2008 骑马装订联动机

本标准规定了骑马装订联动机的型式、基本参数及型号、要求、试验方法、检验规则及标志、包装、运输与贮存。 本标准适用于由搭页机或搭页机和折页搭页机、骑马订书机、三面切书机及收书装置等组成的骑马装订联动机。

Combined saddle-stitching

JB/T 9124.3-2008 平型网版印刷机.第3部分:曲面式平型网版印刷机

JB/T 9124的本部分规定了曲面式平型网版印刷机的型式与基本参数、要求、试验方法、检验规则及标志、包装、运输、贮存。 本部分适用于承印物为圆柱、圆锥、圆弧面等的手动型及半自动型曲面式平型网版印刷机。

Planographic screen-process press.Part 3:Cylindrical planographic screen-process press

JB/T 10827-2008 印刷机械.卷筒装饰纸凹版印刷机

本标准规定了印刷机械卷筒料装饰纸凹版印刷机(以下简称凹印机)的型式、基本参数、型号和名称、要求、试验方法、检验规则、标志、使用说明、包装、运输和贮存。 本标准适用于卷筒料装饰纸机组式凹版印刷机。

Printing machinery.Reel decorate paper gravure press