J91 内燃机与附属装置 标准查询与下载

JB/T 11653-2013 通用小型汽油机 产品名称和型号编制规则

本标准规定了通用小型汽油机(又称“非道路移动机械用小型点燃式发动机”)产品旳命名及其型号编制规则。本标准适用于以下用途的通用小型汽油机:--草坪机;--油锯;--发电机组;--水泵机组;--割灌机。其他型式的非道路移动机械用小型点燃式发动机亦可参照使用。

Eneral utility small gasoline engine.Nomenclature and code of designations

JB/T 5135.2-2013 通用小型汽油机 第2部分：台架性能试验方法

JB/T 5135的本部分规定了功率不大于30 kW的往复活塞点燃式通用小型汽油机(以下简称汽油机)在试验室台架上进行性能试验的方法。本部分适用于以下用途的汽油机:--草坪机;--油锯;--发电机组;--水泵机组;--割灌机;--打夯机;--喷雾机;--高压清洗机;--中耕机;--吹雪机。本部分不适用于摩托车、舷外机等特殊用途的汽油机。

General utility small gasoline engine.Part 2: Performance test method

JB/T 5135.3-2013 通用小型汽油机 第3部分：可靠性、耐久性试验与评定方法

JB/T 5135的本部分规定了功率不大于30 kW的往复活塞点燃式通用小型汽油机(以下简称汽油机)的可靠性、耐久性试验与评定方法。本部分适用于以下用途的汽油机:--草坪机;--油锯;--发电机组;--水泵机组;--割灌机;--打夯机;--喷雾机;--高压清洗机;--中耕机;--吹雪机。本部分不适用于摩托车、舷外机等特殊用途的汽油机。

General utility small gasoline engine.Part 3: Test and evaluate method of reliability and durability

JB/T 11651-2013 通用小型汽油机 铝连杆技术条件

本标准规定了通用小型汽油机铝连杆(包括连杆盖、连杆体)的技术要求、检验方法、检验规则、标志、包装、运输与贮存。本标准适用于通用小型汽油机铝连杆(以下简称连杆)。

Technical specification for aluminum connecting rod of general small gasoline engine

JB/T 11652-2013 通用小型汽油机 回弹式绳索起动装置技术条件

本标准规定了通用小型汽油机用回弹式绳索起动装置的技术要求、试验方法、检验规则、标志、包装、运输及贮存。本标准适用于通用小型汽油机用回弹式绳索起动装置(以下简称“起动器”)。

Technical specification for recoil startor of general small gasoline engine

GOST ISO 8178-1-2013 往复式内燃机. 排放测量. 第1部分. 气体和颗粒排放物的试验台测定

Reciprocating internal combustion engines. Exhaust emission measurement. Part 1. Test-bed measurement of gaseous and particulate exhaust emissions

NF E37-211-9:2012 往复式内燃机.废气排放测量.第9部分:压燃式发动机瞬态工况排气烟度试验台测量的试验周期和试验方法

Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions

DB/T 44-2011 地震救援装备检测规程 内燃机动力工具

本标准规定了內燃機動力救援工具的檢測要求、檢測內容、檢測指標和檢測方法。 本标准适用于地震救援用破碎锁、链锯、无齿句等内燃机动力工具的定期检测。

Inspection regulations for earthquake rescue equipment Internal combustion engine power tools

DB51/T 1383-2011 拖拉机 变速箱体、传动箱体

Tractor gearbox, transmission box

JB/T 11204-2011 内燃机用硅油风扇离合器.技术条件

本标准规定了内燃机用硅油风扇离合器的术语和定义、产品分类、代号和型号规格标记方法、技术要求、检验方法、检验规则、标志、包装、运输和贮存。本标准适用于风冷式、液冷式内燃机冷却系统中用热双金属感温元件来自动控制冷却风扇转速的硅油风扇离合器。

Silicon oil fan clutch for internal combustion engine.Specifications

JB/T 9759-2011 内燃发电机组轴系扭转振动的限值及测量方法

本标准规定了内燃发电机组轴系扭转振动的允许限值和测量方法的术语和定义、扭转振动计算、扭转振动的测量、扭振限值等。 本标准适用于由往复式内燃机驱动的、固定式和移动式的发电机组轴系。本标准适用于陆用、船用发电机组，本标准不适用于航空和驱动陆用车辆、机车的发电机组。 对特殊用途的内燃发电机组可提出专用要求。

Internal combustion engine driven generating sets.Limits and measuring methods for torsional vibration of shaft systems

JB/T 9746.1-2011 船用齿轮箱.第1部分：技术条件

JB/T 9746的本部分规定了船用齿轮箱（以下简称齿轮箱）及其变型产品的术语和定义，技术要求，试验方法，检验规则，标志、包装、贮存和运输。 本部分适用于主要结构形式为多片湿式摩擦离合器、齿轮传动，具有倒顺、离合、减速或增速功能的齿轮箱。对于尚无合适标准的其他类型齿轮箱或装置可参照执行。

Marine gearboxes.Part 1:Specifications

JB/T 9746.2-2011 船用齿轮箱.第2部分：灰铸铁件.技术条件

JB/T 9746的本部分规定了船用齿轮箱灰铸铁件的材质、尺寸公差、机械加工余量、重量偏差、铸造缺陷的允许范围以及相应的试验方法与检验规则。 本部分适用于砂型铸造的船用齿轮箱灰铸铁件（以下简称铸件），其他方法铸造的灰铸铁件也可参照使用。

Marine gearboxes.Part 2:Gray iron castings. Specifications

EN 1679-1:1998+A1:2011 往复式内燃机.安全性.第1部分:压燃式发动机

This standard specifies the safety requirements for compression ignition engines and their essential auxiliaries used in all applications on land, underground and water, except engines used to propel road vehicles and aircraft. The special requirements needed to cover operation in potentially explosive atmospheres are not covered in this standard. The engine in terms of this standard is understood as the prime mover up to its driving extremitie(s) for power take off(s). The hazards relevant to compression ignition engines are identified in annex A. This standard should be referred to in other standards wherever compression ignition engines are used. This European Standard is not applicable to compression ignition engines which are manufactured before the date of its publication as EN.

Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines

ANSI/UL 1247-2011 固定式消防泵用柴油发动机的安全标准

The following changes to UL 1247 are being proposed: Update and Align Requirements with the Most Recent Edition of Standard NFPA 20; Over-current Protection Criteria; Include Additional Details for Starting System Cranking Tests; Update ECM Testing and Verify Functioning of the Automatic ECM Switching Feature; Update Test Methods; Terminal Block Arrangements and Associated Text; Engine Factory Equipped with a Fire Pump Controller and Investigated as a Complete Package; Prevention of Engine Lubrication Oil Contamination With Diesel Fuel

Standard for Safety for Diesel Engines for Stationary Fire Pumps

ASTM D7468-11 康明斯ISM测试的标准试验方法

This test method was developed to assess the performance of an engine oil to control engine wear and deposits under heavy-duty operating conditions selected to accelerate soot generation, valve train wear, and deposit formation in a turbocharged, aftercooled four-stroke-cycle diesel engine equipped with exhaust gas recirculation hardware. This test method may be used for engine oil specification acceptance when all details of this test method are in compliance. Applicable engine oil service categories are included in Specification D4485. The design of the engine used in this test method is representative of many, but not all, modern diesel engines. This factor, along with the accelerated operating conditions needs to be considered when extrapolating test results.1.1 The test method covers a heavy-duty diesel engine test procedure conducted under high soot conditions to evaluate oil performance with regard to valve train wear, top ring wear, sludge deposits, and oil filter plugging in an EGR environment. This test method is commonly referred to as the Cummins ISM Test. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.2.1 Exception8212;The only exception is where there is no direct SI equivalent such as screw threads, national pipe threads/diameters, tubing sizes, or where there is a sole source of supply equipment specification. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Annex A1 for general safety precautions.

Standard Test Method for Cummins ISM Test

DIN EN ISO 11102-1:2010 复式内燃机.手柄起动装置.第1部分:安全性要求和试验(ISO 11102-1-1997).德文版本EN ISO 11102-1-2009

This part of ISO 11102 specifies requirements for handle starting equipment used on reciprocating internal combustion engines for land , rail and marine use, excluding engines used to propel road vehicles and aircraft.

Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997); German version EN ISO 11102-1:2009

SAE J2612-2010 内燃机.活塞词表

This SAE Standard defines the most commonly used terms for pistons. These terms designate either types of pistons or certain characteristics and phenomena of pistons. The terms and definitions apply to pistons for reciprocating internal combustion engines and compressors working under analogous conditions.

Internal Combustion Engines-Piston Vocabulary

NF E37-211-6:2010 往复式内燃机.废气排放测量.第6部分:测量结果和试验报告.

Reciprocating internal combustion engines - Exhaust emission measurement - Part 6 : report of measuring results and test.

ISO 7967-5:2010 往复式内燃机.部件和系统词汇表.第5部分:冷却系统

This part of ISO 7967 establishes a vocabulary for the cooling systems of reciprocating internal combustion engines. ISO 2710 gives a classification of reciprocating internal combustion engines and defines basic terms of such engines and their characteristics.

Reciprocating internal combustion engines - Vocabulary of components and systems - Part 5: Cooling systems