共找到 1198 条与 带绝缘层电线 相关的标准,共 80 页
Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires (IEC 60172:2015); German version EN 60172:2015
Specifications for particular types of winding wires. Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 180
Specifications for particular types of winding wires. General requirements. Glass-fibre wound, resin or varnish impregnated, bare or enameled rectangular copper wire
Specifications for particular types of winding wires -- Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer
Specifications for particular types of winding wires -- Part 4: Solderable polyurethane enamelled round copper wire, class 130
Specifications for particular types of winding wires -- Part 54: Polyester enamelled round copper wire, class 155L
Specifications for particular types of winding wires. General requirements. Enamelled rectangular aluminium wire
This part of IEC 60317 specifies the requirements of enamelled round copper winding wire of class 240 with a single coating of polyamide-imide resin. The range of nominal conductor diameters covered by this part of IEC 60317 is: grade 1:0,180 mm up to and including 1,600 mm; grade 2:0,180 mm up to and including 1,600 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013.
Specifications for particular types of winding wires - Part 59: Polyamide-imide enamelled round copper wire, class 240
Specifications for particular types of winding wires - Part 40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 (IEC 60317-40:2015); German version EN 60317-40:2015
This part of IEC 60317 specifies the requirements of glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper winding wire, temperature index 155. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified. The range of nominal conductor dimensions covered by this standard is: width: min. 2,0 mm max. 16,0 mm; thickness: min. 0,80 mm max. 5,60 mm. The specified combinations of width and thickness as well as the specified width/thickness ratio are according to IEC 60317-0-4.
Specifications for particular types of winding wires - Part 32: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155
This part of IEC 60317 specifies the requirements of polyester glass fibre wound, impregnated, bare or enamelled rectangular copper winding wire, temperature index 200. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified. The range of nominal conductor dimensions covered by this standard is: width: min. 2,0 mm max. 16,0 mm; thickness: min. 0,80 mm max. 5,60 mm. The specified combinations of width and thickness as well as the specified width/thickness ratio are according to IEC 60317-0-4.
Specifications for particular types of winding wires - Part 33: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
This part of IEC 60317 specifies general requirements of glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire. The range of nominal conductor dimensions is given in the relevant specification sheet.
Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire
This part of IEC 60317 specifies the requirements of glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper winding wire, temperature index 180. NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified. The range of nominal conductor dimensions covered by this standard is: width: min. 2,0 mm max. 16,0 mm; thickness: min. 0,80 mm max. 5,60 mm. The specified combinations of width and thickness as well as the specified width/thickness ratio are according to IEC 60317-0-4.
Specifications for particular types of winding wires - Part 31: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. AZA family, single and multicore assembly, for use in low pressure atmosphere. Product standard
Outdoor weather proof polyvinyl chloride insulated wires
Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. AZ family, single, for use in low pressure atmosphere. Product standard
Specifications for particular types of winding wires. Solderable polyurethane enamelled round copper wire, class 130
This part of IEC 60317 specifies the requirements of solderable enamelled round copper winding wire of class 130 with a sole coating based on polyurethane resin, which may be modified provided it retains the chemical identity of the original resin and meets all specified wire requirements. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor diameters covered by this standard is: Grade 1:0,018 mm up to and including 2,000 mm; Grade 2:0,020 mm up to and including 2,000 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013.
Specifications for particular types of winding wires - Part 4: Solderable polyurethane enamelled round copper wire, class 130
Specifications for particular types of winding wires. Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号