共找到 366 条与 电工合金零件 相关的标准,共 25 页
Technical conditions for silver-copper alloy wire (strip) material for commutator
Technical specifications for wires used for rivet type electrical contacts
Rivet type electrical contacts technical conditions
Ferrite cores - Dimensions - Part 12: Ring cores (IEC 62317-12:2016); German version EN 62317-12:2016
Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989 + A1:1999 + A2:2013); German version EN 60529:1991 + A1:2000 + A2:2013, Corrigendum to DIN EN 60529 (VDE 0470-1):2014-09, (IEC 60529 Edition 2.2 Corrigendum 2:2015); German version EN
Standard Terminology Relating to Electrical Insulating Liquids and Gases
The definitions contained in this terminology pertain to terms as they are used in conjunction with fluid insulating materials. Insofar as possible, the definitions are consistent with accepted general usage, and may also contain additional information deemed to be of value in testing of fluid insulating materials.
Standard Terminology Relating to Electrical Insulating Liquids and Gases
Ferrite cores - Dimensions - Part 13: PQ-cores for use in power supply applications (IEC 62317-13:2015); German version EN 62317-13:2015
Dieser Teil von ISO 8430 legt Maße und Grenzabmaße für Widerstandspunktschweiß-Elektrodenhalter (Typ B) ohne Kröpfung, mit Kabelbefestigungsflansch und mit einem Morsekegel versehen, um den Halter direkt im Schweißzylinder in Vielpunkt-Schweißeinrichtungen zu befestigen, fest.
Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016)
Dieser Teil von ISO 8430 legt Maße und Grenzabmaße für Widerstandspunktschweiß-Elektrodenhalter (Typ C) ohne Kröpfung, mit Kabelbefestigungsflansch und mit Klemme, um den Halter direkt im Schweißzylinder in Vielpunkt-Schweißeinrichtungen zu befestigen, fest.
Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016)
Dieser Teil von ISO 18278 legt spezifische Prüfverfahren zur Bestimmung des zulässigen Schweißstrombereiches und der Elektrodenstandmenge fest. Er ist zur Bewertung der Schweißeignung von Baugruppen anwendbar, die aus unbeschichteten und beschichteten Blechen mit individuellen Dicken von 0,4 mm bis 6,0 mm bestehen.
Resistance welding - Weldability - Part 2: Evaluation procedures for weldability in spot welding (ISO 18278-2:2016)
Dieser Teil von ISO 8430 legt Maße und Grenzabmaße für Widerstandspunktschweiß-Elektrodenhalter (Typ A) ohne Kröpfung, mit Kabelbefestigungsflansch und mit einem Kegel 1:10 versehen, um den Halter direkt im Schweißzylinder in Vielpunkt-Schweißeinrichtungen zu befestigen, fest.
Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10
Ferrite cores. Dimensions. PQ-cores for use in power supply applications
Magnetic materials - Part 5 : permanent magnet (magnetically hard) materials - Methods of measurement of magnetic properties
JB/T 9548的本部分规定了硅钼蓝光度法测定铁铬铝合金中硅含量的试剂、分析程序、分析结果计算和精密度等内容。本部分适用于铁铬铝合金中硅含量的测定,测定范围为0.10%~1.00%(质量分数)。
Methods for chemical analysis of Fr-Cr-Al alloys.Part 5: Determination of silicon content
JB/T 9548的本部分规定了高碘酸钠光度法测定铁铬铝合金中锰含量的试剂、分析程序、分析结果计算和精密度等内容。本部分适用于铁铬铝合金中锰含量的测定,测定范围为0.05%~1.00%(质量分数)。
Methods for chemical analysis of Fr-Cr-Al alloys.Part 3: Determination of manganese content
JB/T 9548的本部分规定了过硫酸铵氧化容量法测定铁铬铝合金中铬含量的试剂、分析程序、分析结果计算和精密度等内容。本部分适用于铁铬铝合金中铬含量的测定,测定范围为10.00%~30.00%(质量分数)。
Methods for chemical analysis of Fr-Cr-Al alloys.Part 6: Determination of chromium content
本标准规定了熔断器用Cu/Ag/Cu双侧面复合薄带材的术语和定义、符号、代号及标注方法、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于熔断器用Cu/Ag/Cu双侧面复合薄带材。熔断器用Cu/Ag/Cu双侧面复合薄带材(以下简称复合带)主要应用于各种高低压熔断器中。
Double side composited Cu/Ag/Cu thin strip applied to fuse
JB/T 9548的本部分规定了丁二酮肟光度法测定铁铬铝合金中镍含量的试剂、分析程序、分析结果计算和精密度等内容。本部分适用于铁铬铝合金中镍含量的测定,测定范围为0.05%~1.00%(质量分数)。
Methods for chemical analysis of Fr-Cr-Al alloys.Part 7: Determination of nickel content
本标准规定了粉末冶金法银氧化镉、银氧化锌、银氧化铜等银金属氧化物电触头(以下简称电触头)的技术要求、试验方法、检验规则、标志、包装运输和贮存。本标准适用于低压开关电器用的以粉末冶金基本工艺生产的银金属氧化物电触头元件。
Specification for silver-metal oxide elwctrical contacts by powder metallurgy method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号