K16 电碳制品 标准查询与下载

JB/T 8133.11-1999 电炭制品物理化学性能试验方法.炭柱常态电阻及变形

　　本标准规定了炭柱常态电阻及变形试验方法。 　　本标准适用于P型炭柱常态电阻及变形试验。

Test method for physical-chemical properties of electrical carbon product.Room temperature resistance and deformation of carbon pile

JB/T 8133.10-1999 电炭制品物理化学性能试验方法.径向抗压强度

　　本标准规定了电炭制品径向抗压强度试验方法。 　　本标准适用于青铜石墨轴承径向抗压强度的测定。

Test method for physical-chemical properties of electrical carbon product.Radial mechanical strength

JB/T 8133.9-1999 电炭制品物理化学性能试验方法.抗拉强度

　　本标准规定了电炭制品抗拉强度试验方法。 　　本标准适用于试样颗粒度小于0.79mm的炭石墨制品的抗拉强度试验。

Test method for physical-chemical properties of electrical carbon product.Tensil strength

JB/T 8133.8-1999 电炭制品物理化学性能试验方法.抗压强度

　　本标准规定了电炭制品的抗折强度试验方法。 　　本标准适用于炭和石墨制品抗折强度试验。

Test method for physical-chemical properties of electrical carbon product.Compressive strength

JB/T 8679-1998 炭弧气刨炭棒物理及使用性能试验方法

本标准规定了炭弧气刨炭棒的镀铜层厚度、电阻率及使用性能的试验方法。 本标准适用于炭弧气刨炭棒的物理及使用性能试验。

Carbon arc gouging carbon rod physics and performance test method

ASTM D6120-97 室温下阳极和阴极碳材料电阻的标准试验方法

1.1 This test method covers the determination of the electrical resistivity at room temperature of solid cylindrical specimens cored from commercial sized carbon anodes and cathodes. This test method also applies to samples from carbon blocks prepared in a laboratory.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitation prior to use. For specific safety information, see 8.2.3.

Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

ASTM D6120-97(2007) 室温下阳极和阴极碳材料电阻的标准试验方法

The electrical resistivity of anode and cathode carbon material is important for efficient aluminum cell operation. It is a quality parameter that determines the suitability of an anode/cathode for operation in an aluminum cell. The electrical resitivity may be selected as a requirement in a customer specification.1.1 This test method covers the determination of the electrical resistivity at room temperature of solid cylindrical specimens cored from commercial sized carbon anodes and cathodes. This test method also applies to samples from carbon blocks prepared in a laboratory.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitation prior to use. For specific safety information, see 8.2.3.

Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

IEC 60136:1986/AMD1:1995 电机用电刷和刷握尺寸 修改1

Adds, on page 3, the title of the new appendix D. Replaces, on page 7, for figures 1 and 2 the explanation for t. Replaces, on page 13, the existing text of b). Replaces, on page 33, words in the note of table XIV, in note 2 of table XV and in note 3 of

Dimensions of brushes and brush-holders for electrical machinery; Amendment 1

JB/T 7609-1994 碳石墨材料抗冲击强度试验方法

本标准规定了碳石墨材料抗冲击强度试验方法的原理、试验设备、试验条件、试验步骤、结果的计算等。 本标准适用于碳石墨材料抗击强度的测定。

Test method for impact strength of carbon graphite materials

DIN V 66304 Bb.2:1993 工业自动化.计算机辅助设计.标准件数据交换的格式.示意图表示方法

Industrial automation; Computer Aided Design; format for the exchange of standard parts data; express-scheme for schematic representation

DIN 4000-69:1993 电气和电子产品用支座的产品特性图表

Tabular layouts of article characteristics for holders for electrical and electronic purposes

JB/T 6773-1993 金属石墨制品电阻率试验方法

　　本标准规定了金属石墨制品电阻率的测定方法。 　　本标准适用于银石墨电刷、铜石墨电刷及其它金属石墨制品电阻率的测定。

Test method of resistivity of metal-graphite products

JB/T 2756-1993 无轨电车用碳滑块

　　本标准规定了无轨电车用碳滑块的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 　　本标准适用于无轨电车用碳滑块。

Carbon sliders for trolleybus

JB/T 2934-1993 机械用碳材料及制品

　　本标准规定了机械用碳材料及制品的型号、分类、技术要求、试验方法、检验规则。 　　本标准适用于机械、化工、轻工业部门使用的碳石墨密封环、轴承及旋片。

Carbon materials and products for machinery

JB/T 6772-1993 银石墨电刷

　　本标准规定了银石墨电刷的分类、技术要求、试验方法、检验规则及标志、包装、贮存等要求。 　　本标准适用于在电机或接触环上作为导入或导出电流的滑动接触体——银石墨电刷。

Silver graphite brush

BS EN 60276:1988 碳刷、刷柄、换向器和滑环的定义和名称

Definitions and terms for classes of brush grades, brushes, tops , flexibles (shunts) and connections, commutators and slip-rings, commutator marking and other miscellaneous details.

Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings

IEC 60136:1986 电机用电刷和刷握尺寸

Applies at present only to brushes and brush-holders for cylindrical commutators and slip-rings. Gives lists of standard dimensions. Includes tables of recommended combinations of the principal dimensions. Deals with complementary dimensions and terminat

Dimensions of brushes and brush-holders for electrical machinery

IEC TR 60778:1984 集电环用刷握、R组 RA型

This report is applicable to the brush-holders of medium-size asynchronous industrial machines of conventional construction for general applications having shaft heights between 160 mm and 400 mm. Defines radial brush-holders for slip-rings of the above

Brush-holders for slip-rings group R - type RA

DIN IEC 60467:1978 电机碳刷物理性能测定试验方法

Test Procedures for Determining Physical Properties of Carbon Brushes for Electrical Machines

DIN 43043-1:1976 电动机用双钳位刷握器.第1部分:主要尺寸

Double clamping brush-holders for electrical machinery; principal dimensionsZusammenhang mit den von der International Electrotechnical Commission (IEC) herausgegebenen Publikationen 136-1, 1962, und 136-1A, 1972, siehe Erl?uterungen.

Double clamping brush-holders for electrical machinery; principal dimensions