K31 低压配电电器 标准查询与下载

DIN EN 61058-2-6:2017 电器开关.第2-6部分:电动操作的手持式工具,可移动的工具和草坪园艺机器开关的特殊要求(IEC 61058-2-6-2016);德文版本EN 61058-2-6-2016

Switches for appliances - Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery (IEC 61058-2-6:2016); German version EN 61058-2-6:2016

DIN EN 61058-1-2:2017 电器开关.第1-2部分:电子开关要求(IEC 61058-1-2-2016);德文版本EN 61058-1-2-2016

Switches for appliances - Part 1-2: Requirements for electronic switches (IEC 61058-1-2:2016); German version EN 61058-1-2:2016

DIN EN 60691:2017 热熔断体.要求和应用指南(IEC 60691-2015+COR1-2016).德文版本EN 60691-2016

Thermal-links - Requirements and application guide (IEC 60691:2015 + COR1:2016); German version EN 60691:2016

BS EN 60127-5:2017 微型熔断器.微型熔丝链质量评定指南

Miniature fuses. Guidelines for quality assessment of miniature fuse-links

BS EN 61643-351:2017 低压电涌保护装置组件. 电信和信令网浪涌隔离变压器(SIT)的性能要求和试验方法

Components for low-voltage surge protective devices. Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT)

DIN EN 60947-3:2017 低压开关设备和控制设备.第3部分:开关,切断器,开关切断器及熔断器组合装置 (IEC 60947-3-2008+A1-2012+A2-2015);德文版本EN 60947-3-2009+A1-2012+A2-2015

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:2008 + A1:2012 + A2:2015); German version EN 60947-3:2009 + A1:2012 + A2:2015

DIN EN 61058-1-1:2017 电器开关..第1-1部分:机械开关要求(IEC 61058-1-1-2016);德文版本EN 61058-1-1-2016

Switches for appliances - Part 1-1: Requirements for mechanical switches (IEC 61058-1-1:2016); German version EN 61058-1-1:2016

DIN EN 61008-1 Berichtigung 1:2017 无过电流保护的家用和类似用途剩余电流动作断路器(RCCB). 第1部分: 通用规则(IEC 61008-1-2010, 修改 + A1-2012, 修改 + A2-2013, 修改 + A2-2013/勘误-2014); 德文版本EN 6

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules (IEC 61008-1:2010, modified + A1:2012, modified + A2:2013, modified + A2:2013/Cor.:2014); German version EN 6

IEC 60669-1:2017 家用和类似的固定电气设施用开关.第1部分:一般要求

This part of IEC 60669 applies to manually operated general purpose functional switches@ for alternating current (AC) only with a rated voltage not exceeding 440 V with a rated current not exceeding 63 A@ intended for household and similar fixed electrical installations@ either indoors or outdoors. For switches provided with screwless terminals@ the rated current is limited to 16 A. NOTE 1 The rated current is limited to 16 A for switches provided with insulation piercing terminals (IPT??s) according to Annex D. Switches covered by this document are@ where applicable@ intended for the control in normal use of all of the following loads: ?C a circuit for a tungsten filament lamp load; ?C a circuit for an externally ballasted lamp load (for example LED@ CFL@ fluorescent lamp load); ?C a circuit for a self ballasted lamp load (for example LEDi or CFLi); ?C a circuit for a substantially resistive load with a power factor not less than 0@95; ?C a single phase circuit for motor load with a rated current not exceeding 3 A at 250 V (750 VA) and 4@5 A at 120 V (540 VA) and a power factor not less than 0@6. This applies to both switches rated not less than 10 A that have not undergone additional tests and to momentary switches rated not less than 6 A that have not undergone additional tests. NOTE 2 In the following country the suitability of a switch intended to control the inrush current of a motor shall be tested: AU. This document also applies to boxes for switches@ with the exception of mounting boxes for flush-type switches. NOTE 3 General requirements for boxes for flush-type switches are given in IEC 60670-1. It also applies to switches such as ?C switches incorporating pilot lights; ?C electromagnetic remote control switches (particular requirements are given in IEC 606692- 2); ?C switches incorporating a time-delay device (particular requirements are given in IEC 60669-2-3); ?C combinations of switches and other functions (with the exception of switches combined with fuses); ?C electronic switches (particular requirements are given in IEC 60669-2-1); ?C switches having facilities for the outlet and retention of flexible cables (see Annex A); ?C isolating switches (particular requirements are given in IEC 60669-2-4); ?C switches and related accessories for use in home and building electronic systems (particular requirements are given in IEC 60669-2-5); ?C firemen??s switches (particular requirements are given in IEC 60669-2-6). Switches complying with this document are suitable for use at ambient temperatures not normally exceeding +40 ?? but their average over a period of 24 h does not exceed +35 ?? with a lower limit of the ambient air temperature of ?C5 ?? NOTE 4 For lower temperatures see Annex E. Switches complying with this document are suitable only for incorporation in equipment in such a way and in such a place that it is unlikely that the surrounding ambient temperature exceeds +35 ?? In locations where special conditions prevail@ such as in ships@ vehicles and the like and in hazardous locations@ for example where explosions are liable to occur@ special construction and/or additional requirements may be required

Switches for household and similar fixed electrical installations - Part 1: General requirements

ANSI/UL 60947-7-2-2017 低压开关设备和控制设备安全标准. 第7-2部分: 辅助设备. 铜导体的保护导体接线端子排

UL Standard for Safety Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors (Fourth Edition)

ANSI/UL 60947-7-3-2017 低压开关设备和控制设备安全标准. 第7-3部分: 辅助设备. 保险丝接线端子安全要求

UL Standard for Safety Low-Voltage Switchgear and Controlgear - Part 7-3: Ancillary Equipment - Safety Requirements for Fuse Terminal Blocks (Third Edition)

ANSI/UL 60947-7-1-2017 低压开关设备和控制设备安全标准. 第7-1部分: 辅助设备. 铜导体用接线端子模块

UL Standard for Safety Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors (Fourth Edition)

IEC 62873-1:2017 家用和类似用途的剩余电流动作断路器. 第1部分: 漏电断路器标准的块和模块简介

The IEC 62873 series covers available common standards intended to be used in conjunction with or for the preparation of RCD (residual current device) standards. This part of IEC 62873 defines the methodology and processes used when producing standards based on a new approach (hereafter referred to as blocks and modules) aiming at harmonizing a family of standards, thus avoiding mistakes, inconsistencies or discrepancies within this family of standards. The family of standards considered in this document consists of standards for RCCBs (Residual Current Circuit-Breakers without overcurrent protection), RCBOs (Residual Current Circuit-Breakers with overcurrent Protection), and general safety requirements for residual current operated protective devices (namely IEC 61008-1, IEC 61009-1 and IEC TR 60755). This approach defines a way to optimize drafting of standards, aiming to keep a common or similar structure, to have common clauses (as far as possible), to avoid inconsistencies, to do editorial work only once, to speed up production of standards, to ensure that a comment on one clause in one standard is also taken into account in other standards, if needed. The principles of the blocks and modules approach are: to identify those parts of the standards which need to be identical (or with limited differences), and those parts of the standards which should remain different; to set a library of those common parts; to identify the parts which should be published as stand-alone standards; to draft product standards, using the library; to keep track of the common parts used in a product standard when revision will be needed in the future. This document also lists the available blocks and modules which were prepared for RCD product standards.

Residual current operated circuit-breakers for household and similar use - Part 1: Outline of blocks and modules for residual current device standards

DIN EN 60947-1 Berichtigung 1:2017 低压开关设备和控制设备. 第1部分: 通用规则(IEC 60947-1-2007 + A1-2010 + A2-2014); 德文版本EN 60947-1-2007 + A1-2011 + A2-2014, DIN EN 60947-1 (VDE 0660-100)-2015-09勘误表

Low-voltage switchgear and controlgear - Part 1: General rules (IEC 60947-1:2007 + A1:2010 + A2:2014); German version EN 60947-1:2007 + A1:2011 + A2:2014, Corrigendum to DIN EN 60947-1 (VDE 0660-100):2015-09

DIN EN ISO 4126-1:2016 过压保护安全设备.第1部分:安全阀(ISO 4126-1-2013+Amd 1-2016).德文版本EN ISO 4126-1-2013+A1-2016

Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2013 + Amd 1:2016); German version EN ISO 4126-1:2013 + A1:2016

DIN EN ISO 4126-7:2016 过压保护安全设备.第7部分:通用数据(ISO 4126-7-2013+Amd 1-2016).德文版本EN ISO 4126-7-2013+A1-2016

Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2013 + Amd 1:2016); German version EN ISO 4126-7:2013 + A1:2016

BS EN 60669-2-5:2016 家用和类似用途固定电气装置用开关.特别要求.家庭和建筑电子系统(HBES)用开关及相关附件

Switches for household and similar fixed electrical installations. Particular requirements. Switches and related accessories for use in home and building electronic systems (HBES)

BS EN 61058-2-6:2016 电器开关. 电动操作的手持式工具,可移动的工具和草坪园艺机器开关的特殊要求

Switches for appliances. Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery

BS EN 60691:2016 热熔断体.要求和应用指南

Thermal-links. Requirements and application guide

DIN EN 61008-1:2016 家用和类似用途的不带过电流保护的剩余电流动作断路器 (RCBO). 第1部分:一般规则 (IEC 61008-1-2010,修正本+A1-2012,修正本+A2-2013,修正本+A2-2013/Cor.-2014);德文版本EN 61008-1-2012+A1-2014+A2-2014+A11-2015

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules (IEC 61008-1:2010, modified + A1:2012, modified + A2:2013, modified + A2:2013/Cor.:2014); German version EN 6