K31 低压配电电器 标准查询与下载

ANSI/UL 60947-7-4-2018 低压开关设备和控制设备安全标准. 第7-4部分: 辅助设备. 铜导体PCB端子块

UL Standard for Safety Low-Voltage Switchgear and Controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors (First Edition)

NB/T 42150-2018 低压电涌保护器专用保护设备

Low voltage surge protector special protection equipment

NB/T 42149-2018 具有远程控制功能的小型断路器（RC-MCB)

Miniature circuit breaker with remote control function (RC-MCB)

DIN EN 61008-1:2018 家用和类似用途的不带过电流保护的剩余电流动作断路器 (RCBO). 第1部分:一般规则 (IEC 61008-1-2010,修正本+A1-2012,修正本+A1-2012/COR1-2016+A2-2013,修正本+A2-2013/Cor.-2014);德文版本EN 61008-1-2012+A1-2014+A1-2014/AC-2016+A2-2014+A11-2015+A12-2017

This International Standard applies to residual current operated circuit-breakers functionally independent of, or functionally dependent on, line voltage, for household and similar uses, not incorporating overcurrent protection (RCCBs) for rated voltages not exceeding 440 V a.c. and rated currents not exceeding 125 A, intended principally for protection against shock hazard.

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules (IEC 61008-1:2010, modified + A1:2012, modified + A1:2012/COR1:2016 + A2:2013, modified + A2:2013/Cor.:2014);

UL 1472-2017 固态调光控制的UL安全标准. 节/段落参考: 第7.1.6段主题: 灯兼容性信息 (第一版: 1996年1月2日)

UL Standard for Safety Solid-State Dimming Controls - Section / Paragraph Reference: Paragraph 7.1.6 Subject: Lamp compatibility information (Edition 1: January 02, 1996)

JB/T 8456-2017 低压直流成套开关设备和控制设备

Low voltage DC complete switchgear and control equipment

IEC 60755:2017 剩余电流驱动保护器的一般安全要求

This document provides general minimum requirements, recommendations and information for the drafting of standards on residual current operated protective devices (hereinafter referred to as residual current devices, "RCDs"). It applies to any device providing residual current protection intended primarily for protection against electric shock hazard. NOTE 1 Residual current monitors (RCMs) according to IEC 62020, whose purpose is to monitor an electrical installation and not to provide protection, are not covered by this document and cannot be considered similar or equivalent to RCDs. NOTE 2 RCDs for DC supply system are under consideration. NOTE 3 For the relationship between this document and the RCD product standards, see Annex D. This document is primarily intended to be used as a reference for drafting product safety standard for devices identified as "RCD" or "residual current device" either for general use or incorporated or embedded in equipment. This document is also intended to be used as a reference for defining the design requirements and the applicable testing procedure for an RCD incorporated or embedded in an equipment. This basic safety publication is primarily intended for use by technical Committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. It is not intended for use by manufacturers or certification bodies. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.

General safety requirements for residual current operated protective devices

IEEE Std C37.82-2017 核电站中1E级用开关设备组件的鉴定

The Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations

IEC 60715:2017 低压开关设备和控制设备尺寸.开关设备、控制设备及配件在机械支承导轨上的标准化安装

This document specifies dimensional and functional requirements for the compatible mounting of switchgear, controlgear and accessories on some types of rails. The object of this document is to specify those dimensions that are critical for the correct design of mounting rails and equipment. The following sections are covered by this document: "top hat" section; "C" section; "G" section. NOTE 1 Mounting compatibility does not imply functional interchangeability. Annexes deal with specific steel mounting rails satisfying the requirements of this document, and give additional dimensional data and loading requirements applicable to such rails. NOTE 2 The detailed design and material of specific steel rails is given in the annexes. NOTE 3 Other shapes of rails complying with this document not listed in Annex A can be used. Mounting rails used as a protective conductor using a conducting connection to a protective conductor terminal block are specified in IEC 60947-7-2. In other applications where the mounting rail is used as earthing conductor, the relevant product standard applies. This document has the status of a horizontal standard in accordance with IEC Guide 108:2006. This horizontal standard is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108. One of the responsibilities of a technical committee is, wherever applicable, to make use of horizontal standards in the preparation of its publications. The contents of this horizontal standard will not apply unless specifically referred to or included in the relevant publications.

Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories

IEC TS 63053:2017 直流电(DC)系统剩余电流动作保护器的通用要求

General requirements for residual current operated protective devices for DC systems

DIN CLC/TS 61643-22:2017 低压浪涌保护装置.第22部分:接到通信和信号网络的浪涌保护装置.选择和应用原则(IEC 61643-22-2015,修正本);德文版本CLC/TS 61643-22-2016

Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles (IEC 61643-22:2015, modified); German version CLC/TS 61643-22:2016

JIS C 6575-2 ERRATUM 1:2017 勘误

ERRATUM

ANSI/UL 1699-2017 安全电弧故障断路器(第3版)

UL Standard for Safety Arc-Fault Circuit-Interrupters (Third Editioin)

DIN EN 60730-1:2017 自动电气控制器.第1部分:一般要求 (IEC 60730-1-2013,修正本+COR 1-2014); 德文版本EN 60730-1-2016

Automatic electrical controls - Part 1: General requirements (IEC 60730-1:2013, modified + COR1:2014); German version EN 60730-1:2016

DIN EN 62683:2017 低压开关设备和控制设备.信息交换用产品数据和性能(IEC 62683-2015);德文版本EN 62683-2015

Low-voltage switchgear and controlgear - Product data and properties for information exchange (IEC 62683:2015); German version EN 62683:2015

DIN EN 60669-2-5:2017 家用和类似用途固定电气装置用开关.第2-5部分:特别要求.家庭和建筑电子系统(HBES)用开关及相关附件(IEC 60669-2-5-2013,修订本);德文版本EN 60669-2-5-2016

Switches for household and similar fixed electrical installations - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES) (IEC 60669-2-5:2013, modified); German version EN 60669-2-5:201

DB62/T 2766-2017 电动车车用过流保护器

Overcurrent protector for electric vehicle

DB62/T 2767-2017 固态断路器

solid state circuit breaker

DB62/T 2765-2017 插头式电弧故障保护开关

Plug type arc fault protection switch

DIN EN 61058-1-2:2017 电器开关.第1-2部分:电子开关要求(IEC 61058-1-2-2016);德文版本EN 61058-1-2-2016

Switches for appliances - Part 1-2: Requirements for electronic switches (IEC 61058-1-2:2016); German version EN 61058-1-2:2016