K46 电力半导体器件、部件 标准查询与下载

IEC 62477-2:2018 电力电子转换器系统和设备用安全性要求.第2部分:从1000伏交流或1500伏直流到36千伏交流或54千伏直流的电力电子转换器

This part of IEC 62477 applies to power electronic converter systems (PECS) and equipment@ their components for electronic power conversion and electronic power switching@ including the means for their control@ protection@ monitoring and measurement@ such as with the main purpose of converting electric power@ with rated system voltages from 1 000 V AC or 1 500 V DC up to 36 kV AC or 54 kV DC. This document can also be used as a reference standard for product committees producing product standards for ? adjustable speed electric power drive systems (PDS)@ ? standalone uninterruptible power systems (UPS)@ and ? stabilized DC power supplies. For PECS for which no product standard exists@ this document provides minimum requirements for safety aspects. This document has the status of a group safety publication in accordance with IEC Guide 104 for power electronic converter systems and equipment for solar@ wind@ tidal@ wave@ fuel cell or similar energy sources. According to IEC Guide 104@ one of the responsibilities of technical committees is@ wherever applicable@ to make use of basic safety publications and/or group safety publications in the preparation of their product standards. This document ? establishes a common terminology for safety aspects relating to PECS and equipment@ ? establishes minimum requirements for the coordination of safety aspects of interrelated parts within a PECS@ ? establishes a common basis for minimum safety requirements for the PEC portion of products that contain PEC@ ? specifies requirements to reduce risks of fire@ electric shock@ thermal@ energy and mechanical hazards@ during use and operation and@ where specifically stated@ during service and maintenance@ ? specifies minimum requirements to reduce risks with respect to pluggable and permanently connected equipment@ whether it consists of a system of interconnected units or independent units@ subject to installing@ operating and maintaining the equipment in the manner prescribed by the manufacturer@ ? establishes an arc fault rating label requirement with testing instructions for PEC and PECS@ and ? covers power electronic converters and systems in open type design@ which are catalog (pre-defined commercially available) power electronic converters and systems or engineered solutions from same. This document does not cover ? telecommunications apparatus other than power supplies to such apparatus@ ? functional safety aspects as covered by@ for example@ IEC 61508 (all parts)@ ? electrical equipment and systems for railways applications and electric vehicles@ and ? power electronic converters and systems in open type design@ which are ?C in their major part ?C dimensioned@ designed and constructed according to the user??s individual requirements and specifications and follow power installation standards@ for example IEC 61936-1.

Safety requirements for power electronic converter systems and equipment - Part 2: Power electronic converters from 1000 V AC or 1500 V DC up to 36 kV AC or 54 kV DC

NB/T 42142-2018 光伏并网微型逆变器技术规范

Technical specifications for photovoltaic grid-connected microinverters

NB/T 42143-2018 光伏组件功率优化器技术规范

Photovoltaic module power optimizer technical specifications

NB/T 32004-2018 光伏并网逆变器技术规范

Photovoltaic grid-connected inverter technical specifications

DIN EN 61975:2017 高压直流系统装置.系统试验(IEC 61975-2010+A1-2016);德文版本EN 61975-2010+A1-2017

This International Standard defines system tests for high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected to an a.c. system.

High-voltage direct current (HVDC) installations - System tests (IEC 61975:2010 + A1:2016); German version EN 61975:2010 + A1:2017

IEC TR 60919-1:2017 带有线性整流转换器的高压直流(HVDC)系统的性能.第1部分:稳态条件

Performance of high-voltage direct current (HVDC) systems with line- commutated converters - Part 1: Steady-state conditions

DB42/T 1254-2017 逆变型地铁车辆再生制动能量回收装置技术要求

Technical requirements for regenerative braking energy recovery devices for inverter-type metro vehicles

DL/Z 1697-2017 柔性直流配电系统用电压源换流器技术导则

Technical guidelines for voltage source converters used in flexible DC power distribution systems

NB/T 42104.2-2016 地面用晶体硅光伏组件环境适应性测试要求 第2部分：干热气候条件

Environmental suitability test requirements for ground crystalline silicon photovoltaic modules Part 2: Hot and dry climate conditions

NB/T 42104.4-2016 地面用晶体硅光伏组件环境适应性测试要求 第4部分：高原气候条件

Environmental adaptability test requirements for ground crystalline silicon photovoltaic modules Part 4: Plateau climate conditions

NB/T 42104.1-2016 地面用晶体硅光伏组件环境适应性测试要求 第1部分：一般气候条件

Environmental suitability test requirements for ground crystalline silicon photovoltaic modules Part 1: General climatic conditions

NB/T 42103-2016 集散式汇流箱技术规范

Technical Specifications of Distributed Combiner Box

NB/T 42104.3-2016 地面用晶体硅光伏组件环境适应性测试要求 第3部分：湿热气候条件

Environmental suitability testing requirements for ground crystalline silicon photovoltaic modules Part 3: Hot and humid climate conditions

DIN EN 60700-1:2016 压直流(HVDC)电力传输用可控硅阀.第1部分:电气试验(IEC 60700-1-2015).德文版本EN 60700-1-2015

Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (IEC 60700-1:2015); German version EN 60700-1:2015

IEC 61803:2016 带线路换流转换器的高压直流(HVDC)换流站的功率损失测定

This International Standard applies to all line-commutated high-voltage direct current (HVDC) converter stations used for power exchange in utility systems. This standard presumes the use of 12-pulse thyristor converters but can, with due care, also be used for 6-pulse thyristor converters. In some applications, synchronous compensators or static var compensators (SVC) may be connected to the a.c. bus of the HVDC converter station. The loss determination procedures for such equipment are not included in this standard. This standard presents a set of standard procedures for determining the total losses of an HVDC converter station. Typical HVDC equipment is shown in figure 1. The procedures cover all parts, except as noted above, and address no-load operation and operating losses together with their methods of calculation which use, wherever possible, measured parameters. Converter station designs employing novel components or circuit configurations compared to the typical design assumed in this standard, or designs equipped with unusual auxiliary circuits that could affect the losses, shall be assessed on their own merits.

Determination of power losses in high-voltage direct current (HVDC) converter stations with line commutated converters

NB/T 31093-2016 微电网用风力发电机组主控制器技术规范

Technical Specifications for Main Controllers of Wind Turbine Sets for Microgrids

NB/T 31092-2016 微电网用风力发电机组性能与安全技术要求

Performance and safety technical requirements for wind turbines used in microgrids

NB/T 31095-2016 风电电气设备 安全通用要求

General safety requirements for wind power electrical equipment

BS EN 62823:2015 晶闸管控制串联电容器 (TCSC) 用晶闸管阀. 电气试验

Thyristor valves for thyristor controlled series capacitors (TCSC). Electrical testing

NB/T 42057-2015 低压静止无功发生器

本标准规定了低压静止无功发生器的相关术语和定义、型号命名与产品分类、使用条件、基本电路及构成、技术要求、试验方法、检验规则以及标志、铭牌、包装、运输与贮存等要求。本标准适用于标称电压1000V(1140V)及以下、频率50Hz的交流电力系统中、用于改善电力功率因数及电能质量的低压静止无功发生器(以下简称发生器，也称低压静止同步补偿装置)。

Low-voltage static var generator