共找到 124 条与 其它电气器具 相关的标准,共 9 页
Cable duct systems for electrical installations Part 2: Particular requirements Section 3: Grooved cable duct systems for installation in cabinets
Cable glands for electrical installations
Cable clamps for electrical installations
本文件规定了家用和类似用途的器具耦合器的额定值、标志、尺寸检查、防触电保护、结构、电气性能、机械性能等技术要求。 本文件适用于家用和类似用途的、两极和两极带接地的器具耦合器,其用于将家用和类似用途的电气器具连接到主电源。 本文件也适用于安装在器具上或与器具形成一体的器具输入插座或器具输出插座。),额定电流不超过16A。额定电压不超过250V(a.c.符合本文件要求的器具耦合器适合正常使用在环境温度通常不超过+40 ℃ ,但是在24h 的期间内平均环境温度不超过+35 ℃ ,环境空气温度的下限值为-5 ℃ 。 附录E提供了在环境温度高于+35 ℃ 且不超过至+90 ℃ (包括+90 ℃ )的情况下,对附件工作电流降额的测试要求。器具耦合器不适用于: ———用来代替GB/T2099.1 插头插座系统; ———用来代替GB/T31463(所有部分)灯具的连接装置(DCLs)或灯具配套耦合器(LSCs)的器件; ———用来代替GB/T32517 安装式耦合器。
Appliance couplers for household and similar general purposes—Part 1: General requirements
本文件规定了两极和两极带接地触头的器具耦合器的尺寸和量规。 本文件适用于两极和两极带接地触头的器具耦合器,其用于: ———将家用或类似用途的电气设备连接到电网电源上;和 ———将电源互连到器具或设备上; ———以及量规的尺寸。
Appliance couplers for household and similar general purposes—Part 3: Standard sheets and gauges
本文件规定了地面安装盒与外壳的标志、防触电保护、结构、机械性能、电气性能等技术要求。GB/T17466.1—2019 的本章增加下述内容后适用。在第四段后增加:本文件适用于安装盒和外壳。暗装式地面安装盒和暗装式地面外壳预期用于保护附件免受不大于1000N的载荷压力的影响。 注:户外要求在考虑中。
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 23: Particular requirements for floor boxes and enclosures
本文件规定了连接盒与外壳的标志、防触电保护、结构、机械性能、电气性能等技术要求。GB/T17466.1—2019 的本章增加下述内容后适用。第四段后增加:本文件适合用于端接和/或分接的连接盒。
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 22: Particular requirements for connecting boxes and enclosures
本文件规定了用于悬吊装置的安装盒和外壳的标志、防触电保护、结构、机械性能、电气性能等技术要求。GB/T17466.1—2019 的本章增加下述内容后适用:第四段后增加:本文件适用于装有悬吊装置的安装盒和外壳。
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 21: Particular requirements for boxes and enclosures with provision for suspension means
Cable management systems—Specifications for conduit fittings and accessories for cable installations for extra heavy duty electrical steel conduit
Indicator light units for household and similar fixed-electrical installations—Part 1: General requirements
GB/T17466的本部分规定了家用和类似用途固定式电气装置的电器附件安装盒和外壳的标志、防触电保护、结构要求、机械性能、电气性能等技术要求。 本部分适用于户内或户外使用的额定电压不超过1000Va、的家用和类似用途固c、和1500Vd、c、定式电器装置的电器附件安装盒、外壳或外壳部件(以下统称安装盒和外壳)。 符合本部分的安装盒和外壳适合在通常不超过40℃,但24h内平均不超过35℃的环境温度下使用,其周围环境空气的下限温度为-5℃。 本部分适用范围是全国电器附件标准化技术委员会(SAC/TC67)和全国低压电器标准化技术委员会(SAC/TC189)中家用断路器及其类似设备(对应IEC/SC23E)的电器附件安装盒和外壳。 本部分也可作为其他标准化技术委员会和分委员会的参考文件。 成为电器附件不可分离的一部分并能为电器附件提供防外部影响(如机械冲击、固体或水进入等)的安装盒和外壳,适用于该电器附件相关标准要求。 本部分不适用于: ———天花板灯线盒; ———照明支承配件; ———为GB/T19215电缆槽管系统专门设计且不打算安装在这些系统之外的安装盒、外壳和外壳部件。
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 1:General requirements
Articulated systems and flexible systems for cable guiding
A.C.electric fans and regulators
Electrical accessories—Cable reels for household and similar purposes
Appliance couplers for household and similar general purposes—Part 2-1: Sewing machine couplers
Industrial cable reels
Cable trunking and ducting systems for electrical installations—Part 2: Particular requirements—Section 4:Service poles
Conduit systems for cable management—Part 21: Particular requirement for rigid conduit systems
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment
Energy conservation and corrosion-resistant steel-made cable support system
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号