K72 一般灯具 标准查询与下载

BS EN 1873:2014 屋顶用预制附件.塑料单个屋顶灯.产品规范和试验方法

Prefabricated accessories for roofing. Individual rooflights of plastics. Product specification and test methods

DIN EN 61231:2014 国际灯具编码系统(ILCOS)

International lamp coding system (ILCOS) (IEC 61231:2010 + A1:2013); German version EN 61231:2010 + A1:2013

IEC 61534-21:2014 动力轨道系统.第21部分:墙面和天花板安装用动力轨道系统的特殊要求

This part of IEC 61534 specifies the particular requirements and tests for PT systems intended for mounting on walls and/or ceiling. They may be installed flush or semi-flush@ surface mounted@ suspended or spaced away from the surface using fixing devices.

Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting

DIN EN 60927:2014 灯附件.起动装置(辉光起动器除外).性能要求

Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements (IEC 60927:2007 + A1:2013); German version EN 60927:2007 + Cor.:2008 + A1:2013

DIN VDE 0100-718:2014 低压电气装置. 第7-718部分:特殊装置或场所的要求. 公共设施和工作场所 (IEC 60364-7-718-2011); 德文实施版本HD 60364-7-718-2013

Low-voltage electrical installations - Part 7-718: Requirements for special installations or locations - Communal facilities and workplaces (IEC 60364-7-718:2011); German implementation HD 60364-7-718:2013

IEC 60400:2014 管状荧光灯的灯座和启辉器座

Lampholders for tubular fluorescent lamps and starterholders

IEC 60400:2008/AMD2:2014 管状荧光灯的灯座和启辉器座; 修改件2

Lampholders for tubular fluorescent lamps and starterholders; Amendment 2

IEC 60630:1994/AMD7:2014 白炽灯的最大灯具轮廓; 修改件7

Maximum lamp outlines for incandescent lamps; Amendment 7

BS PD CEN/TS 16163:2014 文化遗产保护. 室内展览适当照明选择指南和程序

Conservation of Cultural Heritage. Guidelines and procedures for choosing appropriate lighting for indoor exhibition

IEC 60598-1:2014 照明设备.第1部分:一般要求和试验

"This Part 1 of IEC 60598 specifies general requirements for luminaires@ incorporating electric light sources for operation from supply voltages up to 1 000 V. The requirements and related tests of this standard cover: classification@ marking@ mechanical construction@ electrical construction and photobiological safety. Each section of this Part 1 is read in conjunction with this Section 0 and with other relevant sections to which reference is made. Each part of IEC 60598-2 details requirements for a particular type of luminaire or group of luminaires on supply voltages not exceeding 1 000 V. These parts are published separately for ease of revision and additional sections will be added as and when a need for them is recognized. The presentation of photometric data for luminaires is under consideration by the International Commission on Illumination (CIE) and is not@ therefore@ included in this Part 1. Requirements for semi-luminaires are included in this Part 1. In general@ this Part 1 covers safety requirements for luminaires. The object of this Part 1 is to provide a set of requirements and tests which are considered to be generally applicable to most types of luminaires and which can be called up as required by the detail specifications of IEC 60598-2. This Part 1 is thus not regarded as a specification in itself for any type of luminaire@ and its provisions apply only to particular types of luminaires to the extent determined by the appropriate part of IEC 60598-2. The parts of IEC 60598-2@ in making reference to any of the sections of Part 1@ specify the extent to which that section is applicable and the order in which the tests are to be performed; they also include additional requirements as necessary. The order in which the sections of Part 1 are numbered has no particular significance as the order in which their provisions apply is determined for each type of luminaire or group of luminaires by the appropriate part of IEC 60598-2. All parts of IEC 60598-2 are self-contained and therefore do not contain references to other parts of IEC 60598-2. Where the requirements of any of the sections of Part 1 are referred to in the parts of IEC 60598-2 by the phrase ""The requirements of section... of IEC 60598-1 apply""@ this phrase is to be interpreted as meaning that all the requirements of that section of Part 1 apply except those which are clearly inapplicable to the particular type of luminaire covered by that part of IEC 60598-2. For explosion proof luminaires@ as covered by IEC 60079@ the requirements of IEC 60598 (selecting the appropriate parts 2) are applied in addition to the requirements of IEC 60079. In the event of any conflict between IEC 60598 and IEC 60079@ the requirements of IEC 60079 take priority. Attention is drawn to lamp performance standards which contain ""information for luminaire design""; this should be followed for proper lamp operation; however@ this standard does not require the testing of lamp performance as part of the type test approval for luminaires. Improvements in safety to take into account the state of the art technology are incorporated in the standards with revisions and amendments on an ongoing basis. Regional standardisation bodies may include statements in their derived standards to cover products which have complied with the previous document as shown by the manufacturer or standardization body. The statements may require that for such products@ the previous standard may continue to apply to production until a defined date after which the new standard shall apply."

Luminaires - Part 1: General requirements and tests

IEC 60364-7-753:2014 低压电气装置. 第7-753部分: 特殊安装或场所要求. 供热电缆和嵌入式加热系统

Low-voltage electrical installations - Part 7-753: Requirements for special installations or locations - Heating cables and embedded heating systems

IEC TR 62778:2014 IEC 62471在光源和照明蓝光危害评价方面的应用

Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires

DB44/T 1339-2014 可移式LED灯具

标准规定了以LED为光源、电源电压不超过250V的一般照明用可移式灯具的术语和定义、测试环境和测试方法等技术要求。 本标准不适用于手提灯和带有应急转换功能的可移式LED灯具。

Portable LED lamps

SN/T 3326.8-2014 进出口照明器具检验技术要求 第8部分:高压钠灯的能效

SN/T 3326的本部分规定了进出口高压钠灯的能效的检验技术要求、抽样和试验方法、检验和合格判定。本部分适用于作为室内外照明用的、功率小于1 000 W且带有透明玻壳或非透明玻壳的高压钠灯,配以相应的镇流器和触发器,在额定电压或额定电压范围内正常启动和燃点。

Technical requirements for the inspection of lighting appliances for import and export.Part 8:Energy efficiency for high-pressure sodium lamps

DIN EN 60598-2-11:2014 灯具.第2-11部分:详细要求.鱼缸用灯具(IEC 60598-2-11-2013)

Luminaires - Part 2-11: Particular requirements - Aquarium luminaires (IEC 60598-2-11:2013); German version EN 60598-2-11:2013

IEC 62442-2:2014 灯具控制装置的能源性能. 第2部分: 高强度放电灯(荧光灯除外)的控制装置. 确定控制装置效率的测量方法

This part of the IEC 62442 series defines a measurement method of the power losses of electromagnetic controlgear@ the total input power and the standby power of electronic controlgear for high intensity discharged lamps (excluding fluorescent lamps). Also a calculation method of the efficiency for controlgear for high intensity discharged lamp(s) is defined. This International Standard applies to electrical controlgear ?C lamp circuits comprised solely of the controlgear and of the lamp(s). NOTE Requirements for testing individual controlgear during production are not included. It specifies the measurement method for the total input power@ the standby power and the calculation method of the lamp controlgear efficiency for all controlgear sold for domestic and normal commercial purposes operating with high intensity discharge lamps. This International Standard does not apply to: -controlgear which form an integral part of lamps; -controlgear circuits with capacitors connected in series; -controllable wire-wound electromagnetic controlgear.

Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear

DIN EN 60598-2-24:2014 灯具.第2-24部分:详细要求.限制表面温度的灯具(IEC 60598-2-24-2013).德文版本EN 60598-2-24-2013

Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures (IEC 60598-2-24:2013); German version EN 60598-2-24:2013

IEC 62442-3/COR1:2014 灯具控制装置的能源性能. 第3部分: 卤钨灯和LED模块的控制装置. 确定控制装置效率的测量方法

Energy performance of lamp controlgear - Part 3: Controlgear for halogen lamps and LED modules - Method of measurement to determine the efficiency of the controlgear

JIS C 8105-5 AMD 1:2014 照明设备.第5部分:偏角分光测光法(修改件1)

Luminaires -- Part 5: Gonio-photometric methods (Amendment 1)

JIS C 7550 AMD 1:2014 灯具和照明光系统生物安全性(修改件1)

Photobiological safety of lamps and lamp systems (Amendment 1)