K82 化学电源 标准查询与下载

JIS C 62932-2-1:2021 固定应用的液流电池能量系统. 第2-1部分: 性能一般要求和试验方法

Flow battery energy systems for stationary applications -- Part 2-1: Performance general requirements and test methods

JIS C 62932-2-2:2021 固定应用的液流电池能量系统. 第2-2部分: 安全要求

Flow battery energy systems for stationary applications -- Part 2-2: Safety requirements

EN IEC 62485-5:2021 二次电池和电池装置的安全要求第5部分：固定式锂离子电池的安全操作

Safety requirements for secondary batteries and battery installations - Part 5: Safe operation of stationary lithium ion batteries

DIN EN IEC 63115-1:2021 含有碱性或其他非酸性电解质的二次电池和电池. 工业应用的密封镍金属氢化物电池和电池. 第1部分: 性能(IEC 63115-1-2020); 德文版本EN IEC 63115-1-2020

This International Standard specifies marking, designation, tests and requirements for the sealed nickel-metal hydride cells and batteries used in industrial applications including stationary applications. Examples of applications for this standard are stationary applications lik

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 1: Performance (IEC 63115-1:2020); German version EN IEC 63115-1:2020

IEC 63115-2:2021 含有碱性或其他非酸性电解质的二次电池和电池. 工业应用的密封镍金属氢化物电池和电池. 第2部分: 安全性

This document specifies designations, tests and requirements for the safe operation of sealed nickel-metal hydride cells and batteries used in industrial applications excluding road vehicles. When an IEC International Standard specifying test conditions and requirements for cells

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 2: Safety

DIN EN IEC 62282-8-102:2021 燃料电池技术. 第8-102部分: 反向模式下使用燃料电池模块的储能系统. 带有质子交换膜的单电池和电池堆性能测试程序,包括可逆操作(IEC 62282-8-102-2019); 德文版本EN IEC 62282-8-102-2020

This part of IEC 62282-8-102, which is an international standard, provides for PEM cell/stack assembly unit, testing systems, instruments and measuring methods, and test methods to test the performance of PEM cells and stacks in fuel cell mode, in electrolysis and/or in reversibl

Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation (IEC 62282-8-102:2019); Ger

DIN EN IEC 63057:2020 含有碱性或其他非酸性电解质的二次电池和电池. 用于非推进汽车的二次锂电池的安全要求(IEC 63057-2020); 德文版 EN IEC 63057-2020

This International Standard specifies safety tests and requirements for lithium secondary batteries permanently installed in road vehicles not for the propulsion. The batteries replaced with permanently installed in road vehicles not for the propulsion are covered by this standar

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium batteries for use in road vehicles not for the propulsion (IEC 63057:2020); German version EN IEC 63057:2020

GA/T 1733-2020 便携式警用装备锂离子电池和电池组通用技术要求

General technical requirements for lithium-ion batteries and battery packs for portable police equipment

NB/T 10092-2018 全钒液流电池用橡胶类密封件技术条件

Technical specifications of rubber seals for all-vanadium redox flow batteries

NB/T 42145-2018 全钒液流电池 安装技术规范

All-vanadium redox flow battery installation technical specifications

NB/T 42144-2018 全钒液流电池 维护要求

All-vanadium redox flow battery maintenance requirements

NB/T 42146-2018 锌溴液流电池 电极、隔膜、电解液测试方法

Test methods for zinc-bromine flow battery electrodes, separators, and electrolytes

IEC 62282-5-100:2018 燃料电池技术.第5-100部分:便携式燃料电池装置.安全性

This part of IEC 62282 covers construction@ marking and test requirements for portable fuel cell power systems. These fuel cell systems are movable and not fastened or otherwise secured to a specific location. The purpose of the portable fuel cell power system is to produce electrical power. This document applies to AC and DC type portable fuel cell power systems@ with a rated output voltage not exceeding 600 V AC@ or 850 V DC for indoor and outdoor use. These portable fuel cell power systems cannot be used in hazardous locations as defined in IEC 60050-426:2008@ 426-03-01 unless there are additional protective measures in accordance with IEC 60079-0[5]1). This document does not apply to portable fuel cell power systems that are 1) permanently connected (hard wired) to the electrical distribution system@ 2) permanently connected to a utility fuel distribution system@ 3) exporting power to the grid@ 4) for propulsion of road vehicles@ 5) intended to be used on board passenger aircraft. Fuel cells that provide battery charging for hybrid vehicles where the battery provides power and energy for propulsion of the vehicle are not included in the scope of this document The following fuels and fuel feedstocks are considered within the scope of this document: ? natural gas@ ? liquefied petroleum gas@ such as propane and butane@ ? liquid alcohols@ for example methanol@ ethanol@ ? gasoline@ ? diesel@ ? kerosene@ ? hydrogen@ ? chemical hydrides. This document does not preclude the use of similar fuels or oxidants from sources other than air provided the unique hazards are addressed through additional requirements. The overall design of a portable fuel cell power system anticipated by this document forms an assembly of some or all of the following systems (see Figure 1)@ integrated as necessary@ to perform designated functions@ as follows: Fuel processing system ?C chemical processing equipment including any associated heat exchangers and controls required to convert input fuel to a composition suitable for the fuel cell stack. Oxidant processing system ?C subsystem that meters@ conditions@ processes and may pressurize the incoming oxidant supply for use within the fuel cell power system. Thermal management system ?C subsystem intended to provide cooling and heat rejection in order to maintain thermal equilibrium within the fuel cell power system@ and@ if necessary@ to provide for the recovery and utilization of excess heat and to assist in heating the fuel cell power systems during start-up. Power conditioning system ?C equipment which is used to change the magnitude or waveform of the voltage@ or otherwise alter or regulate the output of a power source. Automatic control system ?C assembly of sensors@ actuators@ valves@ switches and logic components (including process controllers) that maintains the fuel cell power system parameters within the manufacturer??s specified limits without manual intervention. Fuel cell module ?C assembly@ including a fuel cell stack(s)@ which electrochemically converts chemical energy to electric energy and thermal energy intended to be integrated into a power generation system. Fuel supply system ?C either integral to the portable fuel cell power system or supplied through a removable and refillable container assembly. On-board energy storage system ?C an internal energy source intended to aid or complement the fuel cell module in providing power to internal or external loads. Ventilation systems ?C subsystem of the fuel cell power system that provides@ by mechanical means@ air to its cabinet. Water treatment systems ?C provides for treatment and purification of recovered or added water for use within the portable fuel cell power system. These requirements are not intended to prevent the design and construction of a portable fuel cell power system not specifically described in this document@ provided that such alternatives have been considered and equivalent testing yields equivalent safety performance to that specified in this document. In considering alternative designs or construction@ this document can be used to evaluate the alternative materials or methods to be used as to their ability to yield equivalent performance to that specified in this document. This document does not cover requirements of pressurized or non-pressurized fuel supply containers upstream of the appliance gaseous or liquid fuel supply connector that are not integral to the portable fuel cell power system. All pressures in this document are considered to be gauge pressures@ unless otherwise specified.

Fuel cell technologies - Part 5-100: Portable fuel cell power systems - Safety

DIN IEC/TS 62282-7-1:2017 燃料电池技术.第7-1部分:试验方法.燃料电池(PEFC)用单电池性能测试(IEC/TS 62282-7-1-2017)

This Technical Specification covers cell assemblies, test station setup, measuring instruments and measuring methods, performance test methods, and test reports for PEFC single cells. This Technical Specification is used for evaluating: a) the performance of membrane electrode assemblies (MEAs) for PEFCs in a single cell configuration; b) materials or structures of PEFCs in a single cell configuration; or, c) the influence of impurities in fuel and/or in air on the fuel cell performance.

Fuel cell technologies - Part 7-1: Test methods - Single cell performance tests for polymer electrolyte fuel cells (PEFC) (IEC/TS 62282-7-1:2017)

NB/T 42134-2017 全钒液流电池管理系统技术条件

All-vanadium redox flow battery management system technical conditions

NB/T 42135-2017 锌溴液流电池通用技术条件

General technical conditions for zinc-bromine flow batteries

NB/T 42133-2017 全钒液流电池用电解液 技术条件

Technical conditions of electrolyte for all-vanadium redox flow battery

NB/T 42132-2017 全钒液流电池 电堆测试方法

All-vanadium redox flow battery stack testing method

SJ/T 11685-2017 平衡车用锂离子电池和电池组规范

本标准规定了平衡车用锂离子电池和电池组的术语和定义、要求、试验方法、质量评定及标识、包装、运输和储存。 本标准适用于平衡车用锂离子电池和电池组。 对于无自平衡功能的滑板车等类似产品的锂离子电池、电池组也参考适用。

Specifications of lithium ion cells and batteries used in self-balancing vehicle

JIS C 8500:2017 原电池.总则

Primary batteries -- General