K84 蓄电能装置 标准查询与下载

JB/T 11340.4-2012 阀控式铅酸蓄电池安全阀.第4部分：橡胶垫、圈

JB/T 11340的本部分规定了阀控式铅酸蓄电池安全阀、端子、极柱用橡胶垫、圈的术语和定义、技术要求、试验方法、检验规则、标志、包装、搬运和贮存。 本部分适用于铅酸蓄电池安全阀、端子、极柱用橡胶垫和橡胶圈。

Valve-regulated lead-acid battery safety valve.Part 4: Rubber facing ring, rubber loop

JB/T 11339-2012 电动助力车用阀控密封式铅酸蓄电池使用技术规范

本标准规定了电动助力车用阀控密封式铅酸蓄电池（以下简称蓄电池）安装、使用、更换技术规范。 本标准适用于电动助力车用阀控密封式铅酸蓄电池。

Operating technical specifications for VRLA batteries for using in electric-assisted vehicles

JB/T 11338-2012 微型阀控式铅酸蓄电池

本标准规定了微型阀控式铅酸蓄电池（以下简称蓄电池）的产品分类及外形尺寸、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于微型阀控式铅酸蓄电池。

Miniature valve-regulated lead-acid battery

JB/T 11340.1-2012 阀控式铅酸蓄电池安全阀.第1部分：安全阀

JB/T 11340的本部分规定了阀控式铅酸蓄电池（以下简称蓄电池）安全阀的技术要求、试验方法、检验规则、标志、搬运和贮存。 本部分仅适用于阀控式铅酸蓄电池的安全阀。

Valve-regulated lead-acid battery safety valve.Part 1: Safety valve

IEC 61982:2012 电动道路车辆推进用蓄电池(非锂).性能和耐久试验

This International Standard is applicable to performance and endurance tests for secondary batteries used for vehicle propulsion applications. Its objective is to specify certain essential characteristics of cells@ batteries@ monoblocks@ modules and battery systems used for propulsion of electric road vehicles@ including hybrid electric vehicles@ together with the relevant test methods for their specification. The tests may be used specifically to test batteries developed for use in vehicles such as passenger vehicles@ motor cycles@ commercial vehicles@ etc. This standard is not applicable to battery systems for specialist vehicles such as public transport vehicles@ refuse collection vehicles or heavy duty vehicles@ where the battery is used in the similar way to the industrial vehicles. The test procedures are defined as a function of the vehicle requirements of performance. This standard is applicable to lead-acid batteries@ Ni/Cd batteries@ Ni/MH batteries and sodium based batteries used in electric road vehicles. Annex A specifies performance and cycle life test procedures of Ni/MH batteries used for the propulsion of hybrid electric vehicle (HEV). NOTE This standard is not applicable to lithium-ion batteries for automobile application that are specified in IEC 62660-1@ IEC 62660-2@ ISO 12405-1 and ISO 12405-2 (to be published).

Secondary batteries (except lithium) for the propulsion of electric road vehicles - Performance and endurance tests

DIN EN 61960:2012 含碱性或其它非酸性电解质的蓄电池和畜电池组.便携式二次锂电池和蓄电池组

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications (IEC 61960:2011); German version EN 61960:2011

DIN EN 62660-1:2012 电动道路车辆推进用二次锂离子蓄电池—第1部分:性能试验(IEC 62660-1-2010).德文版本EN 62660-1-2011

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing (IEC 62660-1:2010); German version EN 62660-1:2011

DIN EN 62660-2:2012 电动道路车辆推进用二次蓄电池.第2部分:可靠性及滥用试验(IEC 62660-2-2010).德文版本EN 62660-2-2011

Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing (IEC 62660-2:2010); German version EN 62660-2:2011

UL 1642-2012 锂蓄电池组

Lithium batteries

JIS C 8705 ERRATUM 1:2012 勘误表

ERRATUM

DIN EN 61951-2:2012 含碱性或其他非酸性电解质的蓄电池和蓄电池组.便携密封可再充电单电池.第2部分:镍金属氢化物

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride (IEC 61951-2:2011); German version EN 61951-2:2011

SAE J2185-2012 重型蓄电池寿命试验(仅铅酸蓄电池)

This SAE Standard applies to lead-acid 12 V heavy-duty storage batteries as described in SAE J537 and SAE J930 for uses in starting, lighting and ignition (SLI) applications on motor vehicles and/or off-road machines.

Life Test for Heavy-Duty Storage Batteries (Lead Acid Type only)

SAE J2950-2012 汽车锂离子电池系统的装运,运输和装卸推荐实施规程(RP)

This SAE RP provides a basis from which to determine the relevant regulations to consult when preparing a new battery system for shipment. It also provides recommendations that can be implemented during the development of the battery system to be used by qualified users to determine the transportability of a used battery system. The determination of whether the battery system is transportable or not with regard to current regulations is shared by the battery system OEM and the shipper.

Recommended Practices (RP) for Shipping, Transport and Handling of Automotive-Type Battery System - Lithium Ion

IEC 61056-1:2012 通用铅酸蓄电池组(阀门调节型).第1部分:一般要求,功能要求,功能特性.试验方法

This Part of IEC 61056 specifies the general requirements@ functional characteristics and methods of test for all general purpose lead-acid cells and batteries of the valve-regulated type : ? for either cyclic or float charge application; ? in portable equipment@ for instance@ incorporated in tools@ toys@ or in static emergency@ or uninterruptible power supply and general power supplies. The cells of this kind of lead-acid battery may either have flat-plate electrodes in prismatic containers or have spirally wound pairs of electrodes in cylindrical containers. The sulphuric acid in these cells is immobilized between the electrodes either by absorption in a microporous structure or in a gelled form. NOTE The dimensions@ terminals and marking of the lead-acid cells and batteries which are applied by this standard are given in IEC 61056-2. This part of IEC 61056 does not apply for example to lead-acid cells and batteries used for ? vehicle engine starting applications (IEC 60095 series)@ ? traction applications (IEC 60254 series)@ or ? stationary applications (IEC 60896 series). Conformance to this standard requires that statements and claims of basic performance data by the manufacturer correspond to these test procedures. The tests may also be used for type qualification.

General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional requirements, functional characteristics - Methods of test

IEC 61056-2:2012 通用铅酸蓄电池组(阀门调节型).第2部分:尺寸、端子和标记

This part of IEC 61056 specifies the dimensions@ terminals and marking for all general purpose lead-acid cells and batteries of the valve regulated type : ? for either cyclic or float charge application; ? in portable equipment@ for instance@ incorporated in tools@ toys@ or in static emergency@ or uninterruptible power supply and general power supplies. The cells of this kind of lead-acid battery may either have flat-plate electrodes in prismatic containers or have spirally wound pairs of electrodes in cylindrical containers. The sulphuric acid in these cells is immobilized between the electrodes either by absorption in a microporous structure or in a gelled form. This standard defines the dimensions of the batteries in length@ height and width@ as well as the shapes of the terminals. The lead-acid cells and batteries which are described in this standard should be tested according to the requirements of IEC 61056-1. This part of IEC 61056 does not apply for example to lead-acid cells and batteries used for ? vehicle engine starting applications (IEC 60095 series)@ ? traction applications (IEC 60254 series) or ? stationary applications (IEC 60896 series). Conformance to this standard requires that dimensions@ terminals and marking correspond to these requirements.

General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking

JIS C 8705:2012 密封可再充电式镍镉单电池

Sealed nickel-cadmium rechargeable single cells

DIN EN 62637-2:2012 小型手持多媒体设备电池充电接口.第2部分:2 mm桶状接口一致性测试(IEC 62637-2-2011).德文版 EN 62637-2-2011

Battery charging interface for small handheld multimedia devices - Part 2:2 mm barrel type interface conformance testing (IEC 62637-2:2011); German version EN 62637-2:2011

DIN EN 62637-1:2012 小型手持多媒体设备电池充电接口.第1部分:2 mm桶状接口(IEC 62637-1-2011).德文版 EN 62637-1-2011

Battery charging interface for small handheld multimedia devices - Part 1: 2 mm barrel interface (IEC 62637-1:2011); German version EN 62637-1:2011

ANSI/UL 2575-2012 电力工具和电动机操作,加热和照明电器中使用的锂离子电池系统

Covers: (1) Proposal to correct standard title reference error in 29.3.

Lithium Ion Battery Systems for Use in Electric Power Tool and Motor Operated, Heated and Lighting Appliances

ANSI/NFPA 111-2012 储蓄电能应急和备用电源系统

1.1 Scope. 1.1.1* This standard shall cover performance requirements for stored electrical energy systems providing an alternate source of electrical power in buildings and facilities in the event that the normal electrical power source fails. 1.1.2 Systems covered in this standard shall include power sources, transfer equipment, controls, supervisory equipment, and accessory equipment, including integral accessory equipment, needed to supply electrical power to the selected circuits. 1.1.3 This standard shall cover installation, maintenance, operation, and testing requirements as they pertain to the performance of the stored emergency power supply system (SEPSS). 1.1.4 Exclusions. 1.1.4.1 This standard shall not cover the following: (1) Application of the SEPSS (2) Distribution wiring (3) Systems having total outputs less than 500 VA or less than 24 V, or systems less than Class 0.033 (4) Unit equipment (5) Nuclear sources, solar systems, and wind stored-energy systems (6) Uninterruptible power systems (UPS) supplied by an emergency power supply system (EPSS) 1.1.4.2 The following shall not be within the scope of this standard: (1) Specific buildings or facilities, or both, requiring an SEPSS (2) Specific loads to be served by the SEPSS (3) Type, class, or level to be assigned to any specific load (See Section 4.1.)

Standard on Stored Electrical Energy Emergency and Standby Power Systems