K84 蓄电能装置 标准查询与下载

IEEE 1491-2012 固定应用电池监测设备的选择和使用IEEE指南

Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications

ANSI/UL 2575-2012 电力工具和电动机操作,加热和照明电器中使用的锂离子电池系统

Covers: (1) Proposal to correct standard title reference error in 29.3.

Lithium Ion Battery Systems for Use in Electric Power Tool and Motor Operated, Heated and Lighting Appliances

ANSI/NFPA 111-2012 储蓄电能应急和备用电源系统

1.1 Scope. 1.1.1* This standard shall cover performance requirements for stored electrical energy systems providing an alternate source of electrical power in buildings and facilities in the event that the normal electrical power source fails. 1.1.2 Systems covered in this standard shall include power sources, transfer equipment, controls, supervisory equipment, and accessory equipment, including integral accessory equipment, needed to supply electrical power to the selected circuits. 1.1.3 This standard shall cover installation, maintenance, operation, and testing requirements as they pertain to the performance of the stored emergency power supply system (SEPSS). 1.1.4 Exclusions. 1.1.4.1 This standard shall not cover the following: (1) Application of the SEPSS (2) Distribution wiring (3) Systems having total outputs less than 500 VA or less than 24 V, or systems less than Class 0.033 (4) Unit equipment (5) Nuclear sources, solar systems, and wind stored-energy systems (6) Uninterruptible power systems (UPS) supplied by an emergency power supply system (EPSS) 1.1.4.2 The following shall not be within the scope of this standard: (1) Specific buildings or facilities, or both, requiring an SEPSS (2) Specific loads to be served by the SEPSS (3) Type, class, or level to be assigned to any specific load (See Section 4.1.)

Standard on Stored Electrical Energy Emergency and Standby Power Systems

GJB 1876A-2011 锌银贮备电池组通用规范

本规范规定了锌银贮备电池组（以下简称“电池组”）的一般要求、质量保证规定和交货准备等要求。 本规范适用于武器用电加热、化学加热和不需要加热的锌银贮备电池组。

General specification for silver zinc reserve batteries

GJB 3251A-2011 金属氢化物-镍蓄电池组通用规范

本规范规定了金属氢化物-镍蓄电池组的通用要求、质量保证规定和交货准备。 本规范适用于金属氢化物-镍蓄电池组（以下简称“电池组”）。

General specification for nickel.metalhydride rechargeable batteries

JB/T 11236-2011 铅酸蓄电池中镉元素测定方法

本标准规定了铅酸蓄电池（以下简称蓄电池）中镉元素的测定方法。 本标准适用于以铅为主要原料的蓄电池。

Determination method for cadmium in lead-acid battery

JB/T 11256-2011 铅酸蓄电池槽盖封合.技术规范

本标准规定了铅酸蓄电池（以下简称蓄电池）封合的术语和定义、技术要求、试验方法、检验规则及标志、包装、运输和贮存要求。 本标准适用于阀控式及其他结构特征的蓄电池用槽盖胶、底胶、色胶的检验及用粘合剂工艺封合和热封工艺热封后的蓄电池密封性的检验。

Container and cover sealing for lead-acid battery.Technical specifications

UL SUBJECT 2262A-2011 便携式燃料电池电源系统或类似设备用带整合式燃料处理装置的硼氢化物燃料盒调查大纲.发布编号:2

1.1 These requirements cover disposable borohydride compound fuel cartridges with integral fuel processing for use with portable fuel cell power systems or similar equipment that use gaseous hydrogen from the cartridge. The fuel contained within the cartridge consists of a sodium or potassium borohydride formulation, or a mixture of these formulations, which have been shown to be UN Class 8 (Corrosive) materials. The compounds, in liquid state are processed through a chemical reaction within the cartridge that results in hydrogen gas (for use as a fuel) and borate solution (waste material stored in the cartridge until disposal). 1.2 These requirements also cover cartridges that contain fuel consisting of UN Class 4, Division 4.3 (Water Reactive) borohydride compounds. The compounds, in solid state, are processed with the addition of water resulting in a chemical process that results in hydrogen gas (for use as fuel) and borate solution (waste material stored in the cartridge until disposal). 1.3 These requirements cover cartridges for use in portable fuel cells systems, but do not cover cartridges for use in equipment intended to be brought on board passenger aircraft. 1.4 The fuel cell cartridges covered by these requirements are for use in ambient temperatures that do not exceed 50°C (121°F) and whose internal pressures do not exceed 100 psig. 1.5 Federal regulatory requirements pertaining to the shipment of fuel cartridges are outside the scope of this Outline of Investigation.

Outline of Investigation for Borohydride Fuel Cartridges with Integral Fuel Processing for Use with Portable Fuel Cell Power Systems or Similar Equipment Issue Number: 2

KS C IEC 62257-8-1:2011 农村电气化用小型可再生能源和混合系统的建议.第8-1部分:独立电气化系统用电池和电池管理系统的选择.汽车用普通铅酸蓄电池的特殊情况

이 표준은 다양한 자동차용 일반 납축전지들 중에서 독립형 태양전지 전력공급 시스템에 가장

Recommendations for small renewable energy and hybrid systems for rural electrification-Part 8-1:Selection of batteries and battery management systems for stand-alone electrification systems-Specific case of automotive flooded lead-acid batteries availab

KS C IEC 62660-2:2011 电动道路车辆驱动用锂离子蓄电池.第2部分:安全性评估

이 표준은 순수 전기자동차 및 하이브리드 전기자동차의 구동 전원으로 사용되는 리튬이차전지셀

Secondary lithium-ion cells for the propulsion of electric road vehicles－Part 2：Reliability and abuse testing

KS C IEC 62660-1:2011 电动道路车辆驱动用锂离子蓄电池.第1部分:性能试验

이 표준은 순수 전기자동차 및 하이브리드 전기자동차의 구동 전원으로 사용되는 리튬이차전지셀

Secondary lithium-ion cells for the propulsion of electric road vehicles-Part 1:Performance testing

DB13/T 1464-2011 蓄电池智能快速充电机

本标准规定了蓄电池智能快速充电机的分类、要求、实验方法、检验规则、标志、包装、运输、储存。本标准适用于蓄电池智能快速充电机。

Battery Intelligent Fast Charger

DIN EN 50342-5:2011 铅酸启动器电池.第5部分:电池外壳和手柄的性能;德文版本EN 50342-5-2010

Lead-acid starter batteries - Part 5: Properties of battery housings and handles; German version EN 50342-5:2010

UL 2580-2011 电动车用电池

Batteries for use in electric vehicles

NF C58-651-2:2011 副电池和含碱电池或其它非酸性电解质.便携式密封可再充电单电池.第2部分:镍金属氢化物.

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2 : nickel-metal hydride.

DIN EN 50272-1:2011 二次电池和电池安装的安全要求.第1部分：通用安全信息;德文版本EN 50272-1:2010

Safety requirements for secondary batteries and battery installations - Part 1: General safety information; German version EN 50272-1:2010

BS EN 61960:2011 蓄电池及含碱或其他非酸性电解质电池.二次锂电池和便携式电池

Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications

BS EN 62660-1:2011 电动道路车辆推进用二次锂离子蓄电池.性能试验

Secondary lithium-ion cells for the propulsion of electric road vehicles. Performance testing

BS EN 62660-2:2011 电动道路车辆推进用二次锂离子蓄电池.可靠性和滥用试验

Secondary lithium-ion cells for the propulsion of electric road vehicles. Reliability and abuse testing

BS EN 61951-2:2011 蓄电池和包含碱性和其他非酸性电解质的电池.便携式密封充电单电池.镍氢电池

Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells. Nickel-metal hydride