L10 电子元件综合 标准查询与下载

DLA DSCC-DWG-04052-2006 多阳极高分子钽芯片固定电容器

This drawing describes the complete requirements for low ESR multiple anode polymer tantalum chip capacitors.

CAPACITOR, FIXED, MULTIPLE ANODE POLYMER TANTALUM CHIP

BS DD IEC/PAS 62435:2006 电子部件.电子元件的长期存储.执行指南

This Publicly Available Specification (PAS) is, first of all, a practical guide to methods of long-duration storage (more than five years) which summarizes the existing practices in the industry. Unless otherwise specified, the approach, as well as the methods presented, apply to all families of electronic components, such as > passive components, including quartz crystals, connectors and relays. However, components with "manufacturer's" specifications showing an expiry date or specific storage conditions are excluded from this document (for example, primary cells, storage cells, etc.); > encapsulated or non-encapsulated active components of a silicon [Si] or gallium arsenide [GaAs] technology; > micro-electronic assemblies.

Electronic components - Long duration storage of electronic components - Guidance for implementation

DLA DSCC-DWG-04051-2006 高分子钽芯片固定电容器

This drawing describes the complete requirements for low ESR polymer tantalum chip capacitors.

CAPACITOR, FIXED, POLYMER TANTALUM CHIP

DLA SMD-5962-95601 REV D-2006 +5和加减12伏特三通道混合直流电和交流电转换器线型微电路

This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of radiation hardness assurance levels are reflected in the PIN.

MICROCIRCUIT, HYBRID, LINEAR, +5 AND PLUS/MINUS 12 VOLT, TRIPLE CHANNEL, DC/DC CONVERTER

DLA SMD-5962-95602 REV D-2006 +5和加减15伏特三通道混合直流电和交流电转换器线型微电路

This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of radiation hardness assurance levels are reflected in the PIN.

MICROCIRCUIT, HYBRID, LINEAR, +5 AND PLUS/MINUS 15 VOLT, TRIPLE CHANNEL, DC/DC CONVERTER

DLA DSCC-DWG-04053 REV A-2006 融合钽芯片固定电容器

This drawing describes the complete requirements for fused tantalum chip capacitors.

CAPACITOR, FIXED, FUSED TANTALUM CHIP

DLA MIL-PRF-39003 L SUPP 1-2006 有可靠性指标的气密封固体电解质钽电容器一般规格

The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using ASSIST Online database at http://assist.daps.dla.mil .

CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

DLA MIL-PRF-39006 G SUPP 1-2006 有可靠性指标的模压非固体电解质钽电容器一般规格

The activities listed above were interested in this document as of the date of this document.

CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

DLA DSCC-DWG-06016 REV A-2006 钽电解质的,(非固定电解质)固定电解电容器

This drawing and MIL-PRF-39006/31 describe the requirements for fixed tantalum(nonsolid electrolyte) capacitors. This drawing offers MIL-PRF-39006/31 capacitors with additional test requirements for use in high reliability applications.

CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM

DLA DSCC-DWG-06014 REV A-2006 钽电解质的,(非固定电解质)固定电解电容器

This drawing and MIL-PRF-39006/25 describe the requirements for fixed tantalum (nonsolid electrolyte) capacitors. This drawing offers MIL-PRF-39006/25 capacitors with additional test requirements for use in high reliability applications.

CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM

DLA QPL-39006-116-2006 电解(非固体电解质)钽固定电容器,确定可靠性一般规格

An asterisk (*) adjacent to the product listing indicates that qualified parts listed on the QPL are available through distributors authorized by the manufacturer in accordance with Military Standard MIL-STD-790. Names and addresses of the distributors are listed in the back of this QPL. These lists are being furnished merely as an aid in identifying authorized sources of ER parts and the responsibility for complying with contractual provisions requiring use of such parts rests with the user of such parts. They have been compiled from information furnished by the manufacturers of ER parts prior to release of this QPL. Inclusion on, or omission from, the list of a particular distributor cannot be relied upon as a guarantee of such distributor's status since the information upon which the list is based may not have been complete and authorized distributors are subject to change by the manufacturer at any time. Inclusion of a firm on such list is not, under any circumstance, to be considered an endorsement of such firm or its products by the Department of Defense.

CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

DLA MIL-PRF-39006 G-2006 有可靠性指标的模压非固体电解质钽电容器一般规格

This specification covers tantalum, electrolytic (nonsolid electrolyte), fixed capacitors (polarized and nonpolarized), hermetically sealed (see 6.7) in metal cases (see 6.1). Capacitors covered by this specification have reliability established for failure rate levels (FRL) ranging from 2.0 (or 1.0) percent to 0.001 percent per 1,000 hours in accordance with MIL-STD-690. These FRL are established at a 60-percent confidence level and are maintained at a 10-percent producer's risk. A Part Per Million (ppm) quality system is used for assessing the average outgoing quality of ER capacitors supplied to this specification. Statistical Process Control (SPC) techniques are required in the manufacturing process to minimize variation in production of ER capacitors supplied to the requirements of this specification.

CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

DLA DSCC-DWG-06013 REV A-2006 钽电解质的,(非固定电解质)固定电解电容器

This drawing and MIL-PRF-39006/22 describe the requirements for fixed tantalum (nonsolid electrolyte) capacitors. This drawing offers MIL-PRF-39006/22 capacitors with additional test requirements for use in high reliability applications.

CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM

IEEE 1641.1-2006 IEEE 1641用指南:信号和试验定义用标准

Guidance in the use of the signal and test definition (STD) standard is provided. STD provides the means to define and describe signals used in testing. This guide describes how to implement, apply, and use a set of common basic signals to form complex signals usable across all test platforms.

the Use of IEEE Std 1641, Standard for Signal and Test Definition

ECA SP 4942-B-2006 电子连接器接触末端机械多孔测试程序发表为ANSI/EIA/ECA-364-60A

General Methods for Porosity Testing of Contact Finishes for Electrical Connectors and Sockets To be published as ANSI/EIA/ECA-364-60A

General Methods for Porosity Testing of Contact Finishes for Electrical Connectors and Sockets To be published as ANSI/EIA/ECA-364-60A

DLA DSCC-DWG-06015 REV A-2006 钽电解质的,(非固定电解质)固定电解电容器

This drawing and MIL-PRF-39006/30 describe the requirements for fixed tantalum (nonsolid electrolyte) capacitors. This drawing offers MIL-PRF-39006/30 capacitors with additional test requirements for use in high reliability applications

CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM

ARMY QPL-55365-81-2006 一般规格的有既定可靠性和非既定可靠性的.电解(钽)固定电容器

This list has been prepared for use by or for the Government in the actheof products covered by Specification MIL-PRF-55365. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the supplier from compliance with the specification requirements.

CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY AND NONESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

SANS 185:2005 电气设备用浸泡型电热元件

Specifies requirements for five types of replaceable immersion-type heating units intended for use in portable electrical appliances for heating water or non-corrosive aqueous solutions at d.c. voltages of not less than 42 V and at a.c. voltages of not m

Immersion-type heating units for electrical appliances

GJB 5422-2005 电子侦察卫星目标位置测向定位计算方法

本标准规定了军用电子元器件γ射线累积剂量效应测量方法。 本标准适用于军用电子元器件在60Co源辐照下电离辐射总剂量效应的实验测量：以及模拟低剂量率辐照下器件电离辐射总剂量效应的加速试验。本标准不适用于脉冲类型辐照效应测量。 本标准所确立的测量方法是损伤性测量方法。

Testing method of military electronic devices for γ-ray total dose radiation

BS EN 61360-4:2005 电子元件标准数据元素类型和相关分类表.标准数据元素类型和元件分类的IEC参考集

This part of IEC 61360 specifies within two dictionaries:

Standard data element types with associated classification scheme for electric components - IEC reference collection of standard data element types and component classes