L15 敏感元器件及传感器 标准查询与下载

AIR FORCE MIL-T-83871 B-1994 振动速度动声拾音传感器

This specification establishes the requirements for one type of velocity vibration pickup.

TRANSDUCER, MOTIONAL PICKUP, VIBRATION, VELOCITY

AIR FORCE MIL-T-26609 C-1994 位置传感器

This specification covers the requirements for sealed position transmitters.

TRANSMITTER, POSITION

ANSI/EIA 625:1994 搬运静电放电敏感装置的要求

The purpose of the document is for users to incorporate these minimal requirements into their ESD control program to provide a consistent ESD protection level for their products.

Requirements for Handling Electrostatic-Discharge-Sensitive (ESDS) Devices

SJ/T 10434-1993 电子设备用电阻式湿敏元件.第2部分：空白详细规范：组合型电阻式湿敏元件评定水平 E(可供认证用)

本规范规定了组合型电阻式湿敏元件详细规范的编写格式和至少应包括的内容。 本规范适用于组合型电阻式湿敏元件编制详细规范用。

Resistance type humidity sensors for use in electronic equipment.part2:Blank detail specification:Resistance type humidity sensors with linear characteristic Assessment level E

SJ/T 10431-1993 湿敏元件用湿度发生器和湿度测试方法

本标准规定了湿敏元件用湿度发生器、湿度测量装置和测试湿敏元件湿度特性的主要方法。这些装置和方法也适用于测试湿度传感器，校准毛发湿度表、干湿表(计)等其它类型湿度仪(计)。

Humidity generators and humidity testing methods for humidity sensors

SJ/T 10432-1993 电子设备用电阻式湿敏元件.第1部分：总规范(可供认证用)

本规范规定了电子设备用电阻式湿敏元件适用于电子元器件鉴定批准和质量评定体系的分规范和详细规范中使用的标准术语、质量评定程序、试验和测量程序。 本规范适用于电子设备用电阻式湿敏元件。这类湿敏元件的电阻值随环境湿度而变化，它在空气(气体)湿度的测量和控制电路中用作敏感元件(传感器)。 根据湿敏元件的电阻湿度特性，可将电阻式湿敏元件分为几类，如线性型电阻式湿敏元件；指数型电阻式湿敏元件；开关型电阻式湿敏元件；等等。也可按结构形式分类，如组合型电阻式湿敏元件；单个型电阻式湿敏元件；等等。 注：本规范同样适用于电导式湿度传感器。

Resistance type humidity sensors for use in electronic equipment.part1:General specification

SJ/T 10430-1993 压阻式压力传感器空白详细规范评定水平 E(可供认证用)

Blank detail specification for the plenoresistive pressure transducer Assessment level E

SJ/T 10429-1993 压阻式压力传感器总规范

本标准规定了压阻式压力传感器的特性和优先值、试验方法、验收规则。 本标准适用于压阻式压力传感器的研制、生产和使用中作为设计、试验和验收的依据。

General specification for the Piezoresistive pressure transducer

SJ/T 10433-1993 组合型电阻式湿敏元件.第2部分：分规范：电子设备用电阻式湿敏元件(可供认证用)

本规范规定了电子设备用具有线性特性的组合型电阻式湿敏元件的性能要求，质量评定程序、试验和测量方法。

Resistance type humidity sensors for use in electronic equipment.part2:Sectional specification:Resistance type humidity sensors with linear characteristic

IEC 61102:1991/AMD1:1993 0.5MHz～15MHz频率范围内用水听器测量和表征超声场 修改1

Amends the INTRODUCTION, subclauses 3.7 to 3.10, 8.1.5, adds new definitions 3.62 (bandwidth), 3.63 (pulse beam-width), 3.64 (pulse beam-radii) and the new subclause 5.5 (Requirements for transducers with cylindrical or spherical active elements), replac

Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0,5 MHz to 15 MHz; amendment 1

ARMY MIL-S-48461 B (2)-1993 11732800:斜角传感器

This amendment forms a part of MIL-S-48461B(AR), dated 30 June 1981, and is approved for use by the U.S. Army Armament, Munitions, and Chemical Command, Department of the Army, and is available for use by all Departments and Agencies of the Department of Defense.

SENSOR, CANT ANGLE: 11732800

AIR FORCE MIL-T-5796 D-1993 0-100 PSI油压传感器

This specification covers one type of remote indicating 320 movement synchro style, differential, pressure trangmitter, designated type MS28005-2.

TRANSMITTER, PRESSURE, OIL, 0-100 PSI

prEN 50113-1993 电子温度传感器的测量、控制和调节.热电偶隔离管

Measurement, control, regulation; electrical temperature sensors; isolating tubes for thermocouples

prEN 50112-1993 电子温度传感器的测量、控制和调节.TC组件用的金属保护管

Measurement, control, regulation; electrical temperature sensors; metal protecting tubes for TC assemblies

JJF 1037-1993 线列固体图像传感器特性参数测试技术规范

Technical Norm of measurement and Test of Characteristic parameters for Linear Solid State Image Sensors

ARMY MIL-S-48464 B (1)-1993 11733251:横风传感器

This amendment forms a part of MIL-S-48464B(AR),dated 30 June 1981, and is approved for use by the U.S. Army Armament, Munitions, and Chemical Command, and is available for use by all Departments and Agencies of the Department of Defense.

SENSOR, CROSSWIND: 11733251

SJ 20079-1992 金属氧化物半导体气敏元件.试验方法

Test mehods for gas sensors of metal-oxide semiconductor

BS QC 420000:1992 电子元件质量评估协调体系.电子设备用变阻器.一般规范

Applicable to varistors with symmetrical voltage-current characteristics for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications for Qualification Approval and for Quality Assessment Systems for electronic components.

Harmonized system of quality assessment for electronic components - Varistors for use in electronic equipment: generic specification

EN 100015-1:1992 基本规范.静电敏感器件的保护.第1部分:一般要求

Basic specification: protection of electrostatic sensitive devices; part 1: general requirements

AIR FORCE MIL-T-25485 C (2)-1992 MK-2型压力比率单一同步型推力传感器

This amendment forms a part of MIL-T-25485C (IrSAF! , dated 27 November 1974, and is approve for use by the Department of the Air Force and is available for use by all Departments and Agencies of the Department of Defense.

TRANSMITTER, THRUST, SINGLE SYNCHRO STYLE, PRESSURE RATIO, TYPE MK-2