L15 敏感元器件及传感器 标准查询与下载

SJ 50601/1-1998 MF5602型、MF5604型低温热敏电阻器详细规范

Detail specification for low temperature thermistors for type MF5602 and MF5604

SJ 20722.1-1998 CW-DZ-001型快速响应温度传感器详细规范

Detail specification for fast-response temperature transducers for tyep CW-DZ-001

SJ 20722-1998 热电阻温度传感器总规范

本规范规定了军用温度传感器的通用要求、质量保证规定、试验方法和包装、贮存、运输要求。 本规范适用于热电阻温度传感器，其它温度传感器亦可参照采用。

General specification for temperature transducers for thermal resistance

SJ 20725-1998 MF18型低温温度补偿热敏电阻组件详细规范

本规范规定了MF18型低温温度补偿热敏电阻组件的技术要求，质量保证，检验方法和交货准备等。 本规范适用于MF18型低温温度补偿热敏电阻组件。

Detail specification for module at low temperature for temperature compensation thermistors for type MF18

SJ 20721-1998 压力传感器总规范

本规范规定了军用压力传感器的通用要求、质量保证规定、试验方法和包装、贮存、运输条款。 本规范适用于军用压力传感器的研制、生产和采购。

General specification for presure transducers

SJ 20721.1-1998 CGY-YZ-001型微压传感器详细规范

Detail specification for micro-presure transducers for CGY-YZ-001

SJ/T 11167-1998 敏感元器件及传感器型号命名方法

本标准规定了压敏电阻器、热敏电阻器及温度传感器、湿敏电阻器及湿度传感器、气敏元件及气体传感器、力敏元件及力学量传感器、光敏元件及红外探测器、磁敏元件及磁敏传感器的型号命名。适用于上述产品型号的使用和管理。

Type designation system for sensing elements and sensing devices and transducers/sensors

ARMY MIL-PRF-62546 B-1998 光学火灾传感器

This specification covers two types of optical fire sensor assemblies (OFSAs), components of the Halon 1301 automatic ?re extinguishing systems used in military vehicles. The OFSA detects and signals the presence of a hydrocarbon fire requiring a system response(see 6.1).

SENSOR, FIRE, OPTICAL

ASTM F1349-98(2003) 来自微波感受器的非挥发性紫外线(UV)吸收可萃取物的标准试验方法

1.1 This test method covers the determination of relatively polar ultraviolet (UV) absorbing components that may migrate from microwave susceptor packaging into food simulants, such as corn oil and Miglyol 812.1.2 This test method has been collaboratively studied using bilaminate susceptors constructed of paperboard, adhesive, and a layer of polyethylene terephthalate polymer (PETE) susceptor. Adhesive and PETE related compounds were quantitated using this test method.1.3 The values stated in SI units are to be regarded as the standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given in 4.3.2.3.

Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors

ASTM F1349-98 来自微波感受器的非挥发性紫外线(UV)吸收可萃取物的标准试验方法

1.1 This test method covers the determination of relatively polar ultraviolet (UV) absorbing components that may migrate from microwave susceptor packaging into food simulants, such as corn oil and Miglyol 812. 1.2 This test method has been collaboratively studied using bilaminate susceptors constructed of paperboard, adhesive, and a polyethylene terephthalate (PET) susceptor. Adhesive and PET related compounds were quantitated using this test method. 1.3 The values stated in SI units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 4.3.2.3.

Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors

SJ/T 2307.1-1997 电子元器件详细规范.浪涌抑制型压敏电阻器.MYL1型防雷用氧化锌压敏电阻器.评定水平E

Detail specification for electronic components.Surge suppression varistors.Type MYL1 zinc oxide varistors for use in lightning arrester.Assessment level E

ARMY MIL-DTL-52869 C-1997 有R-1860/FSS-9(V)型接收机和MX-9443/FSS-9(V)型处理器的.被动式超声波传感器组

This specification covers a receiver and a processor which combine toform a passive ultrasonic sensor, designed to detect the sounds of forced entry into a protected space.

SENSOR GROUP, PASSIVE ULTRASONIC: RECEIVER R-1860/FSS-9(V) AND PROCESSOR MX-9443/FSS-9(V)

ARMY MIL-S-52868 D NOTICE 1-1997 DT-548/FSS-9(V)型邻近电容式传感器(代替使用ARMY MIL-S-0052868 C)

This notice should be filed in front of MIL-S-52868D, dated 22 November

SENSOR, CAPACITANCE PROXIMITY, DT-548/FSS-9 (V) [Use In Lieu Of: ARMY MIL-S-0052868 C]

SJ 51782/3-1997 MYG03型压敏电阻器详细规范

Detail specification for varistors for MYG03 type

DIN EN 140202:1997 空白详细规范.大功率固定电阻(评定等级 M)

The document is a supplementary document of the sectional specification for fixed power resistors (Assessment level M) and contains requirements for style and layout and minimum content of the detail specification.

Blank detail specification: Fixed power resistors (Assessment level M); German version EN 140201:1996

DIN EN 140201:1997 空白详细规范.大功率固定电阻(评定等级 S)

The document is a supplementary document of the sectional specification for fixed power resistors (Assessment level S) and contains requirements for style and layout and minimum content of the detail specification.

Blank detail specification: Fixed power resistors (Assessment level S); German version EN 140201:1996

ARMY MIL-M-71074 A NOTICE 3-1997 12561737车辆行驶传感器调制解调器

This notice should be filed in fiont of MIL-M-71074A(AR) dated 25 January 1995

MODEM, VEHICLE MOTION SENSOR: 12561737

ARMY MIL-S-48461 B NOTICE 4-1997 11732800:斜角传感器

This notice should be filed in front of MIL-S-48461B(AR) dated 30 June 1981

SENSOR, CANT ANGLE: 11732800

DIN EN 143004:1997 空白详细规范.直接加热的负温度系数热敏电阻(棒型)

This blank detail specification is a supplemntary document to the sectional specification and contains requirements for the minimum contents of the detail specification.

Blank detail specification: Directly heated negative temperature coefficient thermistors (rod type); German version EN 143004:1991

DIN EN 143001:1997 空白详细规范.直接加热的负温度系数热敏电阻(固态玻璃中的气泡或釉瓷)

This blank detail specification is a supplementary document to the sectional specification and contains requirements for the minimum contents of the detail specification.

Blank detail specification: Directly heated negative temperature coefficient thermistors (beads in solid glass or vitreous enamel); German version EN 143001:1991