L22 开关 标准查询与下载

AIA/NAS NASM3926/1-2001 FSC 5355球状控制旋钮

Knob, Control, Ball FSC 5355

Knob, Control, Ball

AIA/NAS NASM3926/2-2001 FSC 5355椭圆锥形控制旋钮

Knob, Control, Oval Tapered FSC 5355

Knob, Control, Oval Tapered

AIA/NAS NASM3926/3-2001 FSC 5355锥形控制旋钮

Knob, Control, Tapered FSC 5355

Knob, Control, Tapered

DLA SMD-5962-01521 REV A-2001 单片硅辐射硬化数字线性微电路9A非反转MOSFET驱动器

This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.

MICROCIRCUIT, DIGITAL-LINEAR, RADIATION HARDENED, 9 AMP NON-INVERTING MOSFET DRIVER, MONOLITHIC SILICON

JEDEC JESD73-4-2001 7 3867描述标准：2.5V,双重5-比特,2-端口,DDR 场效晶体管开关

This standard covers the specification for the 3877, 2.5 V, FET transmission-gate bus switch device with 2.5 V LVTTL compatible control inputs. Not included in this document are device specific parameters and performance levels that the vendor must also supply for the full device description. The purpose of this standard is to provide a set of uniform data sheet parameters for the description of the 3877, 2.5 V, DDR FET switch device. This standard includes required parameters, test conditions, test levels, and measurement methods for data sheet descriptions of the 3877, 2.5 V, DDR FET switch device. NOTE The designation ‘3877’ refers to the numerical portion of the part designation of a series of commercial logic parts common in the industry. This number is normally preceded by a series of manufacturer specific characters to make up a complete part designation.

7Standard for Description of 3867: 2.5 V, Dual 5-Bit, 2-Port, DDR FET Switch

AIA/NAS NASM3926-2001 FSC 5355(电子,通信及联合装置用)控制旋钮

This specification covers the general requirements for manually operated control knobs and associated knob locks for use with electronic, communications, and allied equipment.

Knobs, Control (for Use with Electronic, Communications, and Allied Equipment)

ANSI/EIA 520E000-A:2000 已质量认证的直插式开关的分规范

Relates to in-line switches of certified quality.

Sectional Specification for In-Line Switches of Certified Quality

JEDEC JESD73-1999 具有TTL兼容控制输入的5 V总线开关设备的描述

This standard covers specifications for a family of 5 V NMOS FET bus switch devices with 5 V TTL compatible control inputs. Not included in this document are device-specific parameters and performance levels that the vendor must also supply for full device description.

Description of 5 V Bus Switch Devices with TTL-Compatible Control Inputs

IEC 62019:1999 电气附件 家用断路器和类似设备 辅助接触件

Applies to circuit-breakers for overcurrent protection and with residual current operated circuit-breakers with or without integral overcurrent protection.

Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units

AIA/NAS NASM24373-1998 FSC 5340型精密装满空气的刚硬旋转投手

Casters, Rigid and Swivel, Precision Pneumatic Tired FSC 5340

Casters, Rigid and Swivel, Precision Pneumatic Tired

SJ 52450/2-1998 KN6J型钮子开关详细规范

Switches,toggle,style KN6J,detail specification for

JB/T 8642-1997 琴键开关

本标准规定了家用电器及类似用途的琴健开关之技术要求及相应的试验方法、检验规则等。 本标准适用于在家用及类似用途的电器上作通、断电路之用，其额定电压不超过 250V 、额定电流不大于 10A ，使用在温度为 -10℃～55℃ 的，无腐蚀无爆炸性气体及导电尘埃的室内及类似环境的机械式琴键开关。

Key type switches

GSA A-A-2768 A-1997 彩色或石墨双重和按钮活动铅笔(0.9 MM和1.1 MM 铅)

This Commercial Item Description covers dual point and push button type mechanical pencils which accommodates 0.9 mm (0.036 inch) or 1.1 mm (0.046 inch) size colored or black graphite leads.

PENCIL, MECHANICAL, DUAL POINT& PUSH BUTTON COLORED OR GRAPHITE (0.9 MM AND 1.1 MM LEAD)

NAVY MS25169 REV G NOTICE 1-1997 小型棒按钮

MS25 169G is inactive for new design and is no longer used, except for replacement purposes.

KNOB, BAR, SMALL

NAVY MS25166 REV E NOTICE 1-1997 照明指针按钮

This notice should be filed in front of MS25166E, dated 24 November 1964.MS25 166E is inactive for new design and is no longer used, except for replacement purposes.

KNOB, POINTER, ILLUMINATED

NAVY MS25167 REV F NOTICE 1-1997 小型圆按钮

MS25 167F is inactive for new design andi s no longer used, excepfto r replacement purposes

KNOB, ROUND, SMALL

NAVY MS25165 REV E NOTICE 1-1997 小型照明指针按钮

This notice should be filed in front of MS25165E, dated 17 June 1975. MS25165E is inactive for new design and is no longer used, except for replacement purposes.

KNOB, POINTER, ILLUMINATED, SMALL

NAVY MS25168 REV F NOTICE 1-1997 圆按钮

This notice should be filed in front of MS25 168F, dated 27 December 1965.

KNOB, ROUND

JIS C 5443:1997 电子设备用开关的一般规范

この規格は，主として電子機器に用いる定格電圧500 V (周彼数50Hz及びのHzの交嵩又は直流)以下,定格電流63A以下の機械的接点をもつ手動操作スイッチ(以下,スイッチという。)の品目別通則であり，スイッチの品種別通則，プランク個別規格及び個別規格に規定する電気的性能，機械的性能，耐候性，その他の共通的要求事項について規定する。

Generic specification of switches for use in electronic equipment

NAVY MS33742 REV A NOTICE 2-1996 控制按钮轴

MS33742A(AS) is inactive for new design and is no longer used, except for replacement purposes.

SHAFTS, CONTROLL KNOB