共找到 442 条与 通信网传输系统接口 相关的标准,共 30 页
This standard is part of a set of standards to facilitate operation of information and electronic products through remote and alternative interfaces and intelligent agents. The purpose of this standard is to provide a framework of components that combine to enable remote User Interfaces and remote control of network-accessible electronic devices and services through a Universal Remote Console (URC). This standard provides an overview of the URC framework and its components.
Information technology - Protocol to Facilitate Operation of Information and Electronic Products through Remote and Alternative Interfaces and Intelligent Agents: Universal Remote Console
Specifies the technical characteristics (electrical and acoustic requirements) to be provided by a single, handset telephony terminal equipment which is intended for pan-European approval; and for connection by 2 wires to an analogue interface of a PSTN.
Public Switched Telephone Network (PSTN); Attachment requirements for a terminal equipment incorporating an analogue handset function capable of supporting the justified case service when connected to the analogue interface of the PSTN in Europe
It is the intention of this standard to use and align with the relevant ITU-T Recommendation. This alignment effort consists of adopting ITU-T Recommendation M-3016, TMN Security Overview, to replace the previously published version of T1.233-1993 (R1999
Telecommunications - Operations, Administration, Maintenance, and Provisioning (OAM&P) - Security Framework for Telecommunications Management Network (TMN) Interfaces
Existing transmission networks are based on Plesiochronous Digital Hierarchy (PDH) as defined in ITU-T Rec.G.702. ATM is considered as the suitable technique to support B-ISDN. The Synchronous Digital Hierarchy (SDH) will form the basis of transport of the ATM cells.
ATM cell mapping into plesiochronous digital hierarchy (PDH) SERIES G: TRANSMISSION SYSTEMS AND MEDIA DIGITAL SYSTEMS AND NETWORKS Digital networks General aspects Study Group 15
Existing transmission networks are based on Plesiochronous Digital Hierarchy (PDH) as defined in ITU-T Rec.G.702. ATM is considered as the suitable technique to support B-ISDN. The Synchronous Digital Hierarchy (SDH) will form the basis of transport of the ATM cells.
ATM cell mapping into plesiochronous digital hierarchy (PDH) SERIES G: TRANSMISSION SYSTEMS AND MEDIA DIGITAL SYSTEMS AND NETWORKS Digital networks General aspects Study Group 15
This specification addresses the handover interfaces for Lawful Interception (LI) of Packet-Data Services, Circuit Switched Services, and Multimedia Services within GSM and UMTS. The handover interface in this context includes the delivery of Intercept R
UMTS Handover Interface for Lawful Interception
Describes the electrical and functional characteristics of Very high bit rate Digital Subscriber Line (VDSL). VDSL is designed to operate on a single pair of unshielded metallic cable. It offers a variety of bit rates (22/3 Mbps, 6/6 Mbps,...) on loops t
Interface Between Networks and Customer Installation Very-high-bit-rate Digital Subscriber Lines (VDSL) Metallic Interface (DMT based)
Interface Between Networks and Customer Installation Very-high-bit-rate Digital Subscriber Lines (VDSL) Metallic Interface (DMT based)
UMTS Handover Interface for Lawful Interception
This standard represents the Protocol Implementation Conformance Statement (PICS) Proforma, per ISO/ IEC Standard 9646-7 (1995) and ITU-T X.296, for conformance specification of base stations and subscriber stations based upon the WirelessMAN-SC (10–66 GHz) air interface specified in IEEE 802.16.
IEEE Standard for Conformance to IEEE 802.16 Part 1: Protocol Implementation Conformance Statement (PICS) Proforma for 10–66 GHz WirelessMAN-SC Air Interface
The scope of this Recommendation is to provide an information model which covers the management aspects of the traffic management service functions in an exchange. The scope is limited only to circuit switched networks using hierarchical routing.
Stage 1, stage 2 and stage 3 description for the Q3 interface – Performance management Amendment 1: Generic transport performance management
The scope of this Recommendation is to provide an information model which covers the management aspects of the traffic management service functions in an exchange. The scope is limited only to circuit switched networks using hierarchical routing.
Stage 1, stage 2 and stage 3 description for the Q3 interface – Performance management Amendment 1: Generic transport performance management
Recognizing that public networks are offering the frame relay data transmission service, there is a need for a standard network-to-network interface to enable interworking. This Recommendation provides the structural details required to implement such an interface. Procedures for PVC and SVC operation are provided.
Network-to-network interface between public networks providing PVC and/or SVC frame relay data transmission service
This Recommendation consists of two parts: the fist one is the comgendum to the published text of Recommendation X.36 agreed upon at the last meeting of Study Group 7 in 1995. This comgendum consists of edited pages of Recommendation X.36 reflecting the appropriate changes. The second part consists of a new clause: clause 10 and a new annex to X.36. Clause 10 defines the signalling for SVC at the DTE/DCE interface and the following three network facilities: closed user group, reverse charging and transit network selection.
Interface between Data Terminal Equipment (DTE) and Data Circuit-terminating Equipment (DCE) for public data networks providing frame relay data transmission service by dedicated circuit
Access and Terminals (AT); Data Over Cable Systems; Part 2: Radio Frequency Interface Specification (V1.2.2)
Access and Terminals (AT); Data Over Cable Systems; Part 3: Baseline Privacy Plus Interface Specification (V1.2.2)
Access and Terminals (AT); Data Over Cable Systems; Part 1: General (V1.2.2)
This revised standard describes the jitter specifications that are applicable to SONET network and equipment interfaces (OC-N and STS-N), and jitter and wander specifications that are applicable to certain SONET payload signals (e.g., DS1 and DS3). This
Telecommunications - Synchronous Optical Network (SONET) - Jitter at Network Interfaces
Provides for consistent user interfaces that take advantage of the characteristics of communications-based train control (CBTC) systems to enhance service effectivesness of a rail transit system.
Standard for User Interface Requirements in Communications-Based Train Control (CBTC) Systems
Telecommunications - Broadband ISDN - Physical Layer Specification for User-Network Interfaces Including DS1/ATM
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号