共找到 208 条与 天线及其馈线 相关的标准,共 14 页
Adaptive antennas concepts and key technical aspects
Adaptive antennas concepts and key technical aspects
Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 4-2: Harmonized EN covering essential requirements of Article 3.2 of R&TTE Directive for antennas V1.1.3
Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 4-1: System-dependent requirements for antennas V1.1.3
Testing method for phased array antenna
Comprises test procedures for the measurement of antenna properties.
Standard Test Procedures for Antennas
Fixed Radio Systems; Point-to-Multipoint Antennas; Antennas for point-to-multipoint fixed radio systems in the 3 GHz to 11 GHz band V1.2.2
The ITU Radiocommunication Assembly considering a) that, when Digital Terrestrial Television Broadcasting (DTTB) is introduced on the basis of sharing spectrum with analogue transmissions, migration from analogue to digital TV broadcasting requires the usage of analogue, digital and hybrid (analogue-digital) TV receivers during the transition period; b) that receivers in use during this transition period must continue to operate and receive new modes of operation when the switch-over to all-digital broadcast operations occur; c) that in the interest of spectrum efficiency and to allow administrations to make adjustments to their digital channel plans it may be highly desirable for digital receivers to have the ability to follow RF channel changes, within the performance range of the receiving antennas, with minimal, if any, viewer intervention; d) the forthcoming conference on revision of the ST61 Plan; e) the need to characterize TV receivers and antennas in the work of ITU-R conferences and other organizations dealing with frequency planning; f) that according to the ITU organization Study Group 6 should consider the Questions concerning TV receivers and antennas; g) that characteristics measuring methods defined by the International Electrotechnical Commission (IEC) should be used.
Digital and analogue-digital TV receivers and receiving antenna characteristics required for the terrestrial TV broadcasting frequency planning Document 6/1-E
Fixed Radio Systems; Multipoint Antennas; Circularly Polarized Antennas for Multipoint Fixed Radio Systems in the 1 GHz to 11 GHz Band (V1.1.1)
Fixed Radio Systems; Multipoint equipment and antennas; Generic harmonized standard for multipoint digital fixed radio systems and antennas covering the essential requirements under article 3.2 of the Directive 1999/5/EC (V1.2.1)
Fixed Radio Systems; Conformance testing; Part 3-2: Point-to-Multipoint antennas - Definitions, general requirements and test procedures (V1.2.1)
Fixed Radio Systems; Point-to-Multipoint Antennas; Antennas for multipoint fixed radio systems in the 11 GHz to 60 GHz band; Part 4: 30 GHz to 40,5 GHz (V1.1.1)
This document is concerned with the fact that an electric blasting cap (initiator) might explode unexpectedly when a nearby radio transmitter is turned on. A cap can absorb electrical energy from a free-space electromagnetic field of the type produced by radio and radar transmitters. This document provides recommendations for limiting the amount of electrical energy absorbed and recommended methods for determining safe distances from radio and radar transmitting antennas when one is using electric blasting caps. Safety is determined by comparing the RF power pickup to the blasting caps no-fire power level. This criterion is valid over the frequency range 3 kHz to 300 GHz that is commonly discussed in connection with RF safety. Radio frequency transmitters that a blaster might encounter occupy only a small portion of this frequency range. Specifically, this document explains how to determine safe distances from RF transmitters with spectrum bands from 10 kHz to 12 GHz, including VHF and UHF television antennas, FM and AM radio transmitting antennas, radar, navigation beacons, and portable communication devices. This document excludes criteria for the use of electro-explosive devices (EEDs) with electrically conductive enclosures or weapons containers, and it does not include sufficient information on hazards deriving from electrostatics or from electromagnetic fields generated by other sources of energy, such as electrical storms, electromechanical equipment, electrical power plants, or power transmission lines. This document does not apply to the use of non-electric detonators.
IEEE Recommended Practice for Determining Safe Distances from Radio Frequency Transmitting Antennas When Using Electric Blasting Caps During Explosive Operations
Transmitting/receiving systems for transmitter RF output power up to 1 kW - Part 300: Safety requirements
Fixed Radio Systems; Point-to-Multipoint Antennas; Antennas for Point-to-Multipoint Fixed Radio Systems in the 11 GHz to 60 GHz Band; Part 2: 24 GHz to 30 GHz (V1.3.1)
Fixed Radio Systems; Electronically Steerable Antennas; Multipoint (MP) Antennas; Fixed Wireless (FWA) Radio Systems (V1.2.1)
Fixed Radio Systems; Point-to-Point and Point-to-Multipoint Equipment; Use of Circular Polarization in Multipoint Systems; Part 1: Systems Aspects (V1.1.1)
Fixed Radio Systems; Point-to-Point and Point-to-Multipoint Equipment; Use of Circular Polarization in Multipoint Systems; Part 2: Antenna Parameters (V1.1.1)
Fixed Radio Systems; Point-to-Point and Point-to-Multipoint Equipment; Use of Circular Polarization in Multipoint Systems; Part 3: Antennas for Multipoint Fixed Radio Systems in the 1 GHz to 11 GHz Band (V1.1.1)
Fixed Radio Systems; Point-To-Point Equipments and Antennas; Generic Harmonized Standard for Point-To-Point Digital Fixed Radio Systems and Antennas Covering the Essential Requirements under Article 3.2 of the 1999/5/EC Directive (V1.2.1)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号