M54 遥控、遥测设备与系统 标准查询与下载

BS EN 60870-6-701:1998 遥控设备和系统 遥控协议与 ISO 标准和 ITU-T 建议兼容 用于在终端系统中提供 TASE.1 应用服务的功能配置文件

This part of IEC 60870 desribes the functional profile (FP) which defines the provision of the TASE.1 communication services between two control centre end systems. This functional profile is supported by the transport services implemented in accordance with transport profiles defined for the type of network that interconnect the control centre end systems. Figure 1 illustrates the applicability of the functional profile.

Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendations. Functional profile for providing the TASE.1 application service in end systems

IEC TR2 60870-6-504:1998 遥控设备和系统.第6-504部分:与ISO标准和ITU-T推荐标准互通的遥控协议.TASE.1用户约定

This technical report defines rules for usage of the TASE.1 Application Programming Interface (TAPI), i.e. parameter usage and service primitive sequencing. The rules which are set forth by this technical report are to be considered as an extension to the rules enforced by the Telecontrol Application Service Element 1 (TASE.1) itself, and will typically constitute further restrictions on parameter values, etc. The TASE.1 own restrictions and rules apply throughout. They are not explicitly restated in this technical report. Whenever the present report allows simultaneous Functional Unit invocations on one association, adherence to the TASE.1 primitive sequencing rules are implicitly assumed. Internal Functional Unit structures, Coordinating Function structure (see clause 4) and structural relationships between these are not within the scope of this technical report, as these are only conceptual entities, serving as a convenient means for describing TASE.1 service primitive sequences. Also not within scope are all non-communicational aspects of application processes, such as local database design/access, and possible data consistency considerations across different local data access modes. The main object of this technical report is to present the underlying conceptual model of the Telecontrol User Element and to identify the functional units (clause 4). The functional units are described in minute detail, grouped into one function group per clause (clauses 5 to 8). note: 1) Consequently, handling of purely local TAPI errors are outside the scope of this technical report. All specified TASE.1 service primitives of types Req and Resp are always assumed to be issued within legal context and have legal parameter values, as far as the TAPI is concerned. For the special case of local call status indicating flow control problems (status value = -1), see 4.2.1. 2) The TASE.1 primitive sequencing rules are embodied in clause 8 of IEC 60870-6-501, and expressed as a set of legal state transitions in clause 7 of IEC 60870-6-502.

Telecontrol equipment and systems - Part 6-504: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.1 user conventions

DIN EN 60870-2-2:1998 遥控设备和系统.第2部分:工作条件.第2节:环境条件(气候,机械和其它非电气影响)

The document applies to telecontrol equipment and systems with coded bit serial data transmission for monitoring and control of geographically widespread processes. It specifies classes for environmental conditions (climatic, mechanical and other non-electrical influences) under which the various components of the systems considered in the scope have to operate. It is also a reference document for teleprotection equipment and systems and for equipment included in a distrubution line carrier communication systen supporting a distrubution automation system.#,,#

Telecontrol equipment and systems - Part 2: Operating conditions; Section 2: Environmental conditions (climatic, mechanical and other non-electrical influences) (IEC 60870-2-2:1996); German version EN 60870-2-2:1996

DIN 43861-2:1998 脉动控制接受机.第2部分:基本尺寸

The document comprises requirements of the dimensions of ripple control receivers.

Ripple control receivers - Part 2: Basic dimensions

NAVY MIL-T-17442 B NOTICE 1-1998 带指示盘的水力遥控读数和保持装置的张力计(扫雷)

MIL-T-l7442B, including Amendment 1, dated 31 May 1968, is inactive for new design and is no longer used, except for replacement purposes.

TENSIOMETER, DIAL INDICATING, HYDRAULIC, REMOTE READING AND MAINTENANCE KIT (MINESWEEPING)

BS EN 60870-5-103:1998 遥控设备和系统 传输协议 保护设备信息接口配套标准

This section of IEC 60870-5 applies to protection equipment with coded bit serial data transmission for exchanging information with control systems. It defines a companion standard that enables interoperability between protection equipment and devices of a control system in a substation. The defined companion standard utilizes standards of the IEC 60870-5 series. This section of IEC 60870-5 presents specifications for the informative interface of protection equipment. This standard does not necessarily apply to equipment that combines protection and control functions in the same device sharing a single communication port. This section of IEC 60870-5 describes two methods of information exchange: the first is based on explicitly specified APPLICATION SERVICE DATA UNITS (ASDUs) and application procedures for transmission of 'standardized' messages, and the second uses generic services for transmission of nearly all possible information. The 'standardized' messages do not cover all possible protection functions, and furthermore a protection device may support only a subset of the messages specified in this standard. For interoperability purposes, in specific applications, this subset has to be specified in clause 8. The use of predefined messages and application procedures is mandatory, if applicable. In other cases generic services shall be used. The 'private ranges' defined in this standard are maintained for compatibility reasons; however, their use is not recommended for future applications.

Telecontrol equipment and systems. Transmission protocols. Companion standard for the informative interface of protection equipment

IEC 60870-5-103:1997 远动设备和系统 第5部分:传输规约 第103节:保护设备信息接口的配套标准

This section of IEC 60870-5 applies to protection equipment with coded bit serial data transmission for exchanging information with control systems. It defines a companion standard that enables interoperability between protection equipment and devices of a control system in a substation. The defined companion standard utilizes standards of the IEC 60870-5 series. This section of IEC 60870-5 presents specifications for the informative interface of protection equipment. This standard does not necessarily apply to equipment that combines protection and control functions in the same device sharing a single communication port. This section of IEC 60870-5 describes two methods of information exchange: the first is based on explicitly specified APPLICATION SERVICE DATA UNITS (ASDUs) and application procedures for transmission of 'standardized' messages, and the second uses generic services for transmission of nearly all possible information. The 'standardized' messages do not cover all possible protection functions, and furthermore a protection device may support only a subset of the messages specified in this standard. For interoperability purposes, in specific applications, this subset has to be specified in clause 8. The use of predefined messages and application procedures is mandatory, if applicable. In other cases generic services shall be used. The 'private ranges' defined in this standard are maintained for compatibility reasons; however, their use is not recommended for future applications.

Telecontrol equipment and systems - Part 5-103: Transmission protocols - Companion standard for the informative interface of protection equipment

IEC 60870-6-802:1997 远程控制设备和系统.第6部分:与ISO标准和ITU推荐相兼容的传输协议.第802节:TASE.2目标模式

Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 802: TASE.2 Object models

IEC 60870-6-503:1997 遥控设备和系统.第6部分:与ISO标准和ITU-T推荐一致的遥控协议.第503节:TASE.2服务和协议

Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 503: TASE.2 services and protocol

DIN EN 60870-5-102:1997 遥控设备和系统.第5部分:传输协议.第102节:供电系统集成总量传输配套标准

Purpose of the document is to standardize the transmission of integrated totals representing the amount of electrical energy transferred between power utilities, or between a power utility and independend producers on a high voltage or medium voltage network as a part of energy management system functionality.#,,#

Telecontrol equipment and systems - Part 5: Transmission protocols; Section 102: Companion standard for the transmission of integrated totals in electric power systems (IEC 60870-5-102:1996); German version EN 60870-5-102:1996

DIN EN 60870-6-502:1997 远动设备和系统.第6部分:符合ISO标准和ITU-T推荐标准的远动协议.第502节:TASE.1协议规范

The document specifies the protocol for the services provided by an application-service-element - The Telecontrol Application Service Element No. 1 (TASE.1) - to support the exchange of process data between telecontrol systems.

Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations; section 502: TASE.1 protocol definitions (IEC 60870-6-502:1995); German version EN 60870-6-502:1996

DIN EN 60870-6-501:1997 远动设备和系统.第6部分:符合ISO标准和ITU-T推荐标准的远动协议.第501节:TASE.1服务定义

Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations; section 501: TASE.1 service definitions (IEC 60870-6-501:1995); German version EN 60870-6-501:1996

NAVY MIL-T-24015 B NOTICE 1-1997 AN/AKT-21遥测数据传输设备

This notice should be filed in front of MLT-24015B(AS), dated 18 September 1970.

TRANSMITTING SET, TELEMETRY DATA AN/AKT-21

DIN EN 60870-2-1:1997 遥控设备和系统.第2部分:操作条件.第1节:电源和电磁适应性

Telecontrol equipment and systems - Part 2: Operating conditions; section 1: Power supply and electromagnetic compatibility (IEC 60870-2-1:1995); German version EN 60870-2-1:1996

DIN EN 60870-6-2:1997 远动设备和系统.第6部分:与ISO标准和ITU-T推荐标准兼容的远动协议.第2节:基础标准(OSI--1层至4层)的使用

Particular items are given for ISO and ITU-T compatible protocols of telecontrol equipment and systems and the use of standards which are related to layers 1 through 4 of the ISO reference model. The role and functions carried out by each layer are specified, the relevant standards are listed and general considerations and recommendations for the use of the standards are given, and that for end-systems and intermediate systems. PSDN, or indirectly through the provided OSI-connection-mode network service.#,,#

Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations; section 2: Use of basic standards (OSI layers 1-4) (IEC 60870-6-2:1995); German version EN 60870-6-2:1995

ARMY MIL-M-55336 NOTICE 2-1997 MK-1192()单位自动遥控维修配件包

This commercial item description covers brown kraft paper used for general wrapping applications.

MAINTENANCE ACCESSORY KIT, MK-1192( )ARM (UNITS OF)

BS EN 60870-2-2:1997 遥控设备和系统 运行条件 环境条件（气候、机械和其他非电气影响）

Does not cover fire and explosion hazards and ionizing radiation. It provides classes of environment conditions specified in the title.

Telecontrol equipment and systems. Operating conditions. Environmental conditions (climatic, mechanical and other non-electrical influences)

BS EN 60870-5-102:1997 遥控设备和系统 传输协议 电力系统中综合总量传输的配套标准

Provides a standardized methodology for representing the amount of electrical energy transferred between power utilities and independent producers of high or medium voltage, but not low voltage.

Telecontrol equipment and systems. Transmission protocols. Companion standard for the transmission of integrated totals in electric power systems

BS EN 60870-2-1:1996 遥控设备和系统 运行条件 电源及电磁兼容

Defines the characteristic of the power supply and minimum EMC requirements for immunity and emission test levels.

Telecontrol equipment and systems. Operating conditions. Power supply and electromagnetic compatibility

BS EN 60870-6-502:1996 遥控设备和系统 遥控协议与 ISO 标准和 ITU-T 建议兼容 TASE.1 协议定义

This section of EN 60870 series of standards supports the exchange of process data between telecontrol systems.

Telecontrol equipment and systems. Telecontrol protocols compatible with ISO standards and ITU-T recommendations. TASE.1 Protocol definitions