M63 节目传输 标准查询与下载

DB11/Z 384.18-2008 图像信息管理系统技术规范 第18部分：系统平台技术要求

本指导性技术文件规定了图像信息管理系统各级平台的功能及技术要求。 本指导性技术文件适用于图像信息管理系统平台的新建、改建、扩建工程的设计和验收。

Technical Specification for Image Information Management System Part 18：Technical Requirement for Management Platform

DB11/Z 384.15-2008 图像信息管理系统技术规范 第15部分：软件质量评价方法

本标准规定了图像信息管理系统软件及接口软件等的质量模型，对软件的质量特性、子特性、属性以及相应的度量方法进行了详细描述，对软件产品描述和用户文档提出了明确要求。 本标准适用于： （1） 根据质量模型，需求方确定图像信息管理系统软件质量需求和验收准则； （2） 根据需求方提出的质量需求，供应方结合质量模型，编制图像信息管理系统软件需求规格说明，确定质量保证准则。按标准要求提供产品描述和用户文档； （3） 根据图像信息管理系统软件需求规格说明和用户要求，评价方结合质量模型，编制测试方案、测试计划，设计测试用例

Technical Specification for Image Information Management System Part15 ：Software Quality Evaluation Methods

DB11/Z 384.14-2008 图像信息管理系统技术规范 第14部分：手持移动终端联接技术要求

本标准规定了在图像信息管理系统中，通过公众无线数据通信网利用流媒体转发方式进行移动终端图像接收的技术要求，对移动流媒体转发服务器和移动终端管理服务器与无线网关的接口、与图像信息管理系统平台的功能关系行了规范，并对手持移动终端的性能进行了规定。 本标准适用于手机、PDA等手持移动终端进行图像接收的系统设计和验收。

Technical Specifications for Image Information Management System Part14: Technical Specifications for Mobile Terminal’s Networking in Image Information Management System

GY/T 220.9-2008 移动多媒体广播第9部分：卫星分发信道帧格式、信道编码和调制

Mobile multimedia mroadcasting-Part 9:frame structure,channel coding and modulation for satellite distribution channel

GY/T 236-2008 地面数字电视广播传输系统实施指南

本标准描述了符合 GB20600-2006 的地面数字电视广播传输系统的主要特征 , 给出了建立符合 GB 20600-2006 的广播网络的指导性意见 , 包括对单频网和多频网网络结构的一般性描述、节目分配、与模 拟电视共用发射站点的可能性和制约性以及网络规划等内容。 本标准适用于符合 GB206002006 的地面数字电视广播系统 , 可作为建立地面数字电视广播网络的 技术依据 , 用于规范并指导广播网络的实施和运行。

Implementation guidelines for transmission system of digital terrestrial television broadcasting

GY/T 238.1-2008 地面数字电视广播信号覆盖客观评估和测量方法.第1部分：单点发射室外固定接收

本部分规定了符合GB 20600-2006的地面数字电视广播系统单点发射室外固定接收信号覆盖质量的客观评估和测量方法。对于能够确保同样测量不确定度的任何等效测量方法也可以采用。有争议时，应以本部分为准。 本部分适用于地面数字电视广播单点发射室外固定接收。

Objective Assessment and Measurement Methods for Coverage of Digital Terrestrial Television Broadcasting Signals Part 1:Single Transmitter and Outdoor Fixed Reception

IEC 62503:2008 多媒体质量.音频和视频同步的评估方法

This International Standard provides a subjective (or perceptible) and statistical method of assessment of overall, or end-to-end, difference of delays between real world and reproduced scenes in terms of video and accompanying audio recoded in a medium. This International Standard does not specify limiting values for those results obtained by the application of the provisions in this standard. It excludes applications to professional broadcast systems.

Multimedia quality - Method of assessment of synchronization of audio and video

ITU-T J.247-2008 完整参考的客观感知多媒体视频质量测量

This Recommendation provides guidelines and recommendations on the selection of appropriate perceptual video quality measurement equipment for use in multimedia applications when the full reference measurement method can be used. The full reference measurement method can be used when the unimpaired reference video signal is readily available at the measurement point, as may be the case of measurements on individual equipment or a chain in the laboratory or in a closed environment such as a cable television headend. The estimation methods are based on processing video in VGA, CIF, and QCIF resolution. The validation test material contained both multiple coding degradations and various transmission error conditions (e.g. bit errors, dropped packets). In the case where coding distortions are considered in the video signals, the encoder can utilize various compression methods (e.g. MPEG-2, H.264, etc.). The models proposed in this Recommendation may be used to monitor the quality of deployed networks to ensure their operational readiness. The visual effects of the degradations may include spatial as well as temporal degradations (e.g. frame repeats, frame skips, frame rate reduction). The models in this Recommendation can also be used for lab testing of video systems. When used to compare different video systems, it is advisable to use a quantitative method (such as that in J.149) to determine the models’ accuracy for that particular context. This Recommendation is deemed appropriate for telecommunications services delivered at 4 Mbit/s or less presented on mobile/PDA and computer desktop monitors. The following conditions were allowed in the validation test for each resolution: • PDA/Mobile (QCIF): 16 kbit/s to 320 kbit/s • CIF: 64kbit/s-2Mbit/s (C01 has several 2 Mbit/s) • VGA: 128kbit/s-4Mbit/s (V13 has one HRC with 6Mbit/s)

Objective perceptual multimedia video quality measurement in the presence of a full reference Study Group 9

ITU-T J.245-2008 家中图像质量评估的主观评估方法.研究组9

This Recommendation specifies subjective test method of picture quality assessed in the home. Picture quality is observed at user-end in home environment on computer monitor, or TV set (after set-top-box if needed) so only single stimulus method with subjects viewing the material once without the source reference is useful in this case. Details of SSCQE method especially adapted to observation quality in the home on computer screen or TV set are given in this Recommendation. Laboratory subjective video quality testing seeks to separate video quality from all other variables (e.g., by using the professional quality monitor, the impact of monitor is removed from subjective scores). By contrast scores from this methodology will have several variables which cannot be separated from the subjective scores (e.g. impact of consumer quality monitor, potentially distracting wall decorations in home viewing environment). This subjective methodology is intended to more precisely analyze the viewing experience of a subject in their own home, and asks different questions than the laboratory tests. This Recommendation is intended, in particular, for network designers and operators. It gives them guidelines for network design taking into account technical parameters as well as number of sustainable streams and packet rate available for video services as well as the methodology of subjective picture quality evaluation. It may be also very helpful to service providers to quantify users’ complaints about picture quality. The method described in this Recommendation is not intended to replace a subjective experiment conducted in a controlled test environment (e.g. subjective laboratory) nor regulate consumer equipments. Note: The method in this Recommendation is experimental and has not yet been validated and adequate results have not been reviewed. Therefore we caution the users to be careful in their use of this method. It should be also noted that the test result is not appropriate to be compared among different home test environments.

Subjective assessment method of picture quality assessed in the home Study Group 9

ITU-T H.248.37-2008 网关控制协议:IP NAPT障碍包

This Recommendation allows a Media Gateway Controller to control Internet Protocol (IP) Network Address and Port Translation (NAPT) traversal. 1.1 Adaptation on new or changes of remote source address information 1.1.1 Applicability statements (for IP NAPT Traversal package) 1.1.2 Applicability statements concerning IP protocol versions 1.1.3 Relation between packet filters and address latching 1.2 Reporting of new or detected changes of remote address information 1.3 Counting the packets dropped based on implicit filtering

Gateway control protocol: IP NAPT traversal package Study Group 16

ITU-T J.248-2008 电视节目配送中视频-音频延迟的操作监测用要求

This Recommendation specifies requirements for operational monitoring aimed to help minimizing video-to-audio delay, thus minimizing lip-sync errors in the transmission of television programs.

Requirements for operational monitoring of video-to-audio delay in the distribution of television programs Study Group 9

ITU-T H.248.41 AMD 1-2008 网管控制协议:IP域连接包:IP域实用包.修改件1

This Recommendation defines packages defines certain parameters and mechanisms for supporting the interconnection of a packet network with another network. The packages defined by this Recommendation areis only applicable to IP-based H.248 terminations. The packages areis therefore applicable for: ? IP-to-IP H.248 media gateways, and ? IP-to-non-IP H.248 media gateways. 1.1 Specifying the IP realm of an H.248 Stream The MGC may specify the IP realm that a Stream of a particular H.248 Termination belongs to. This is accomplished through the IP Realm Identifier property of the IP Domain Connection package. 1.2 Auditing the MG supported realms and their availability 1.2.1 Auditing all supported realms The MGC can audit the realms supported by the MG (i.e. all realms that the MG is aware of) by using an AuditCapabilities on the IP Realm Identifier property of the IP Domain Connection package. 1.2.2 Understanding the availability of realms The IP Realm Availability package extends the IP Domain Connection package. Through an AuditValue of this package’s Available Realms property, the MGC is able to learn which of the supported realms is currently available (i.e. over which realms the MG can currently send and receive traffic). Similarly, the MGC may request to be notified of changes to the list of available realms through the Available Realms Changed event of the same package.

Gateway control protocol: IP domain connection package Amendment 1: IP realm availability package Study Group 16

GY/T 220.6-2008 移动多媒体广播.第6部分:条件接收

GY/T 220的本部分规定了移动多媒体广播条件接收系统的系统构成、总体要求、技术体系、逻辑架构和功能、分系统间接口、电子钱包模块、移动多媒体广播系统复用传输的适配等。 本部分适用于通过卫星和/或地面无线发射的视频、音频、数据信息等移动多媒体广播系统。

Mobile multimedia broadcasting.Part 6:Conditional Access

SANS 1584-1:2008 电视传输.第1部分:地面电视传输

Specifies the PAL colour television system in accordance with the 625-line system I. Certain tolerances permitted in the generation, processing and transmission of the signal are indicated.

Television transmissions Part 1: Terrestrial television transmissions

ITU-T H.248.1 AMD 1-2008 网管控制协议:版本3:修改件1:修改件和说明.修改件1

To achieve greater scalability, this Recommendation decomposes the H.323 Gateway function defined in ITU-T Rec. H.246 into functional subcomponents and specifies the protocols these components use to communicate. This allows implementations of H.323 gateways to be highly scalable and encourages leverage of widely deployed Switched Circuit Network (SCN) capabilities such as SS7 switches. This also enables H.323 gateways to be composed of components from multiple vendors distributed across multiple physical platforms. The purpose of this Recommendation is to add capabilities currently defined for H.323 systems and is intended to provide new ways of performing operations already supported in H.323. This Recommendation includes several enhancements to ITU-T Rec. H.248.1 Version 2: ? capability to define context properties via packages; ? an IEPS context property; ? a flag to indicate that the MG has OutOfService terminations to report at registration time; ? new message segmentation package and procedures for non-segmenting transports; ? refined package definition requirements and a new package template; ? refined profile definition requirements and a new profile template; ? addition of statistics on a stream level; ? addition of a signal request identifier to differentiate similar signals within a SignalList; ? addition of a base signal parameter to indicate in which direction to play the signal; ? addition of two new Topology types; ? addition of an intersignal delay timer for signals in a SignalList; ? addition of a new ContextIDList construct for command responses; ? addition of a TerminationIDList construct for commands and responses; ? refined ServiceChange procedures; ? addition of a capability for the MGC to regulate the rate at which it receives notifications; ? addition of the ability to add filter conditions to audit requests. This Amendment introduces in H.248.1 (2005/09) the corrections and clarifications identified in previous Implementors’s Guides to H.248.1. It also introduces some formatting changes to enhance readability.

Network Management Control Protocol: Version 3: Modification 1: Modifications and Description. Modification 1

ETSI TS 102 323-2008 数字视频广播(DVB).DVB传输流中TV-Anytime信息的传送和信令(版本1.3.1)

The present document describes a method of supporting personal digital recorders (PDRs) in DVB broadcast networks. It was developed to fulfil the commercial requirements for supporting PDRs detailed in DVB commercial module document PDR008. The data types and protocols defined in the present document are based upon TV-Anytime phase 1 specifications [3], [4], [5] and [6].

Digital Video Broadcasting (DVB); Carriage and signalling of TV-Anytime information in DVB transport streams V1.3.1

GY 5022-2007 广播电视播音（演播）室混响时间测量规范

Specifications for measurement of reverberation time in broadcasting studios (television studios)

GY/T 220.5-2008 移动多媒体广播.第5部分:数据广播

GY/T 220 的本部分规定了移动多媒体广播系统中数据广播业务的数据封装协议和传输方式。 本部分适用于通过卫星和/或地面无线发射视频、音频、数据信息等信号的移动多媒体广播系统。

Mobile multimedia broadcasting. Part 5: Data broadcasting

ANSI/IEEE 1631:2008 服从美国8-VSB数字电视传输屏框的测量用推荐实施规程

This document provides a standardized body of theory, techniques and procedures for measuring the spectral characteristics of 8-VSB transmitters used for terrestrial transmission of digital television (DTV) in the frequency range near their assigned Channels. Essential characteristics are specified and measurement procedures are given that ensure that all parties will obtain comparable results.

Recommended Practice for Measurement of 8-VSB Digital Television Transmission Mask Compliance for the USA

ANSI/SCTE 157-2008 有限电视用VC-1视频系统和传输限制

This document defines the video coding and transport constraints on SMPTE 421M [5] video compression (hereafter called "VC-1") for Cable Television. In particular, this document describes the transmission of VC-1 coded video elementary streams in an MPEG-2 service multiplex (single or multi-program Transport Stream).

VC-1 Video Systems and Transport Constraints for Cable Television