共找到 318 条与 仪器、仪表用材料和元件 相关的标准,共 22 页
本标准适用于无色光学玻璃紫外、红外折射率的测试,其测量精度△n为±2×10。
Colourless optical glass test methods--Autocollimation test method for refractive index in the ultraviolet and infrared wave band
本标准适用于无色光学玻璃光学均匀性的测试。
Colourless optical glass test methods--Test method by collimator for optical homogeneity
本标准适用于测量无色光学玻璃紫外、红外波段的折射率n。其测量精度△n为±2×10。
Colourless optical glass test methods--Least deviation angular test method for refractive index in the ultraviolet and infrared wave band
本标准适用于无色光学玻璃平均线热胀系数和转变温度的测试。线膨胀系数的测试精度为±2×10℃。
Colourless optical glass test methods--Linear thermal expansion coefficient and transformation temperature
本标准适用于无色光学玻璃耐潮湿大气稳定性的测试。
Colourless optical glass test methods--Resistance to humidity
本标准适用于用V棱镜方法进行无色光学玻璃折射率和色散系数的测量。折射率n的测量精度为±3×10;色散系数vt的测量精度为±0.2%。
Colourless optical glass test methods--Refractive index and coefficient of dispersion
本标准适用于无色光学玻璃耐酸稳定性的测试。
Colourless optical glass test methods--Resistance to acid
本标准适用于光学玻璃导热系数的测量,精度为±5%。
Colourless optical glass test methods--Coefficient of thermal conductivity
本标准适用于直径或边长不大于300mm,厚度不大于60mm的无色光学玻璃毛坯(以下简称为玻璃)。
Colourless optical glass
本标准适用于无色光学玻璃光谱内透过率的测量,测量波长范围为280~700nm,透过率测量精度为±0.5%。
Colourless optical glass test methods--Spectral internal transmittance
本标准适用于无色光学玻璃可见光折射率的精密测量。测量精度为±3×10。
Colourless optical glass test methods--Precise test method for refractive index
本标准适用于耐辐射光学玻璃耐辐射性能的测量。
Colourless optical glass test methods--Radiation stability of radiation stable
本标准适用于无色光学玻璃白光吸收系数的测量,其测量精度不低于±5×10。
Colourless optical glass test methods--Coefficient of optical absorption
本标准适用于无色光学玻璃气泡度的检验。
Colourless optical glass test methods--Examination method for extent of bubble
本标准适用于无色光学玻璃条纹度的检测。
Colourless optical glass test methods--Examination method for extent of stria
本标准适用于无色光学玻璃边缘应力双折射的测试。
Colourless optical glass test methods--Edge stress birefringence
本标准适用于无色光学玻璃中部应力双折射的测试。
Colourless optical glass test methods--Middle stress birefringence
本标准适用于无色光学玻璃杨氏模量、剪切模量及泊松比的测试。
Colourless optical glass test methods--Young's modulus torsional rigidity modulus Poisson's ratio
本标准适用于测量无色光学玻璃折射率温度系数β。测量温度范围定为-40~+20℃及+20~+80℃。测量谱线为c′、d、e、F′、g五条谱线。测量精度△β为±5×10/℃。
Colourless optical glass test methods--Temperature coefficient of refractive index
本标准适用于采用Knoop金刚石压头测量无色光学玻璃显微压痕硬度(简称克氏硬度),其测量精度为±5%。
Colourless optical glass test methods--Knoop hardness
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号