共找到 1086 条与 机械量仪表、自动秤重装置与其他检测仪表 相关的标准,共 73 页
Non-automatic weighing instruments -- Metrological and technical requirements and tests -- Part 2: Measuring instruments used in transaction or certification
This part of ISO 10360 specifies a method for testing software used for computing associated features from coordinate measurements. The features of concern are the line (in two and three dimensions), the plane, the circle (in two and three dimensions), the sphere, the cylinder, the cone and the torus. One or more separate tests are required for each feature claimed to be covered by the software. The test is of the software alone and therefore independent of the coordinate measuring system. NOTE 1 If the result of the test indicates that the performance values for linear size parameters of the associated feature are significant compared with the error of indication of a CMM for size measurement (see ISO 10360-2), as provided by the CMM manufacturer, the software is inadequate for application on that measuring system. However, small performance values, obtained as a result of this test, do not provide complete assurance that the software is totally suitable for computing associated features. This part of ISO 10360 is concerned with complete features and non-extremely partial features; however, the test for complete features and that for partial features are separate, and software may be submitted for either or both tests. Cones with very large apex angles are not covered by the test. NOTE 2 Associated cones with very large angles are unusual in practice and the software for their stable computation is not widely available.
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001+Cor. 1:2007); English version of DIN EN ISO 1
Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges; Technical Corrigendum 2
This recommended practice provides a guide to the conduct and analysis of precision centrifuge tests of linear accelerometers, covering each phase of the tests, beginning with the planning.
Recommended Practice for Precision Centrifuge Testing of Linear Accelerometers
Dimensional Measuring Interface Standard, Rev. 5.2, Part 1
Geometrical product specifications (GPS) - Filtration - Overview and basic concepts
Geometrical product specifications (GPS) - Filtration - Linear profile filters - Basic concepts
Technical Corrigendum 1 to ISO 8655-3:2002 was prepared by Technical Committee ISO/TC 48, Laboratory equipment, Subcommittee SC 6, Laboratory and volumetric ware.
Piston-operated volumetric apparatus - Part 3: Piston burettes; Technical Corrigendum 1
Technical Corrigendum 1 to ISO 8655-6:2002 was prepared by Technical Committee ISO/TC 48, Laboratory equipment, Subcommittee SC 6, Laboratory and volumetric ware.
Piston-operated volumetric apparatus - Part 7: Non-gravimetric methods for the assessment of equipment performance; Technical Corrigendum 1
Technical Corrigendum 1 to ISO 8655-2:2002 was prepared by Technical Committee ISO/TC 48, Laboratory equipment, Subcommittee SC 6, Laboratory and volumetric ware.
Piston-operated volumetric apparatus - Part 2: Piston pipettes; Technical Corrigendum 1
Technical Corrigendum 1 to ISO 8655-5:2002 was prepared by Technical Committee ISO/TC 48, Laboratory equipment, Subcommittee SC 6, Laboratory and volumetric ware.
Piston-operated volumetric apparatus - Part 5: Dispensers; Technical Corrigendum 1
Technical Corrigendum 1 to ISO 8655-6:2002 was prepared by Technical Committee ISO/TC 48, Laboratory equipment, Subcommittee SC 6, Laboratory and volumetric ware.
Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error; Technical Corrigendum 1
Technical Corrigendum 1 to ISO 8655-1:2002 was prepared by Technical Committee ISO/TC 48, Laboratory equipment, Subcommittee SC 6, Laboratory and volumetric ware.
Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations; Technical Corrigendum 1
Technical Corrigendum 1 to ISO 8655-4:2002 was prepared by Technical Committee ISO/TC 48, Laboratory equipment, Subcommittee SC 6, Laboratory and volumetric ware.
Piston-operated volumetric apparatus - Part 4: Dilutors; Technical Corrigendum 1
Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement. Evaluating task-specific measurement uncertainty using simulation
Load Cells for Weighing Instruments -- Part 2: Digital Load Cells
Nonautomatic weighing instruments -- Metrological and technical requirements and tests -- Part 3: Weights and poises used in transaction or certification
本规程适用于压电加速度计(以下简称加速度计)的首次检定、后续检定和使用中检验。
Verification Regulation for Piezoelectric Accelerometer
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号