N13 机械量仪表、自动秤重装置与其他检测仪表 标准查询与下载

BS DD ISO/TS 16610-31:2010 产品几何量技术规范(GPS).过滤.稳健轮廓过滤器.高斯回归过滤器

Geometrical product specifications (GPS). Filtration. Robust profile filters. Gaussian regression filters

BS DD ISO/TS 16610-28:2010 几何产品技术规范(GPS).过滤.形态剖面滤波器.端效应

Geometrical product specifications (GPS). Filtration. Profile filters. End effects

JIS B 0642:2010 几何产品规范(GPS).GPS测量设备的一般概念和要求

Geometrical product specifications (GPS) -- General concepts and requirements for GPS measuring equipment

JIS B 1757-2:2010 单个齿轮测量仪器的评定.第2部分:利用球体和汽缸形人工产品进行齿形测量

Evaluation of instruments for the measurement of individual gears -- Part 2: Tooth form measurement using sphere or cylinder artifacts

BS EN ISO 25178-602:2010 产品几何技术规范(GPS).表面纹理.平面.非接触式(共焦彩色探针)仪器的标称特征

This part of ISO 25178 defines the design and metrological characteristics of a particular non-contact instrument for measuring surface texture using a confocal chromatic probe based on axial chromatic dispersion of white light.

Geometrical product specifications (GPS) - Surface texture - Areal - Nominal characteristics of non-contact (confocal chromatic probe) instruments

BS EN ISO 25178-701:2010 产品的几何技术规范(GPS).表面纹理:平面.触点(触针)仪器的测量和校准标准

This part of ISO 25178 specifies ? the characteristics of material measures used as measurement standards, ? the estimation methods of the residual errors, and ? the calibration methods and tests for acceptance and periodical re-verification for areal surface texture contact (stylus) measurement instruments.

Geometrical product specifications (GPS) - Surface texture - Areal - Calibration and measurement standards for contact (stylus) instruments

BS EN ISO 25178-601:2010 产品几何技术规范(GPS).表面纹理.平面.接触式(触针)仪器的标称特征

This part of ISO 25178 defines the metrological characteristics of contact (stylus) areal surface texture measuring instruments.

Geometrical product specifications (GPS) - Surface texture - Areal - Nominal characteristics of contact (stylus) instruments

ISO 25178-602:2010 产品的几何技术规范(GPS).表面纹理:平面.第602部分:非触点(共焦易染色探针)仪器的标称属性

This part of ISO 25178 defines the design and metrological characteristics of a particular non-contact instrument for measuring surface texture using a confocal chromatic probe based on axial chromatic dispersion of white light.

Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments

ISO 25178-601:2010 产品的几何技术规范(GPS).表面纹理:平面.第601部分:触点(触针)仪器的标称属性

his part of ISO 25178 defines the metrological characteristics of contact (stylus) areal surface texture measuring instruments.

Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments

ISO 25178-701:2010 产品的几何技术规范(GPS).表面纹理:平面.第701部分:触点(触针)仪器的测量和校准标准

This part of ISO 25178 specifies . the characteristics of material measures used as measurement standards, . the estimation methods of the residual errors, and . the calibration methods and tests for acceptance and periodical re-verification for areal surface texture contact (stylus) measurement instruments.

Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments

BS DD CEN ISO/TS 14253-4:2010 产品几何技术规范(GPS).工件的检测和测量设备.决策规则中函数极限和规格界限的背景

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Background on functional limits and specification limits in decision rules

DIN EN ISO 25178-6:2010 产品的几何技术规范(GPS).表面纹理:表面的.第6部分:表面纹理测量方法的分类(ISO 25178-6-2010).德文版本EN ISO 25178-6-2010

This part of ISO 25178 describes a classification system for methods used primarily for the measurement of surface testure.

Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010); German version EN ISO 25178-6:2010

DIN EN ISO 10360-2:2010 产品几何技术规范(GPS).坐标测量机(CMM)的验收检测和复检检测.第2部分:用于测量尺寸的坐标测量机(ISO 10360-2-2009).德文版本EN ISO 10360-2-2009

This part of ISO 10360 specifies the acceptance tests for verfying the performance of a coordinate measuring machine (CMM) used for measuring linear dimensions as stated by the manufacturer.

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009); German version EN ISO 10360-2:2009

BS ISO 15769:2010 液体比重测定.使用多普勒效应和回声相关法的声速测量仪的应用指南

Hydrometry - Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods

BS EN ISO 25178-6:2010 产品几何技术规范(GPS).表面纹理.平面.表面纹理测量方法的分类

This part of ISO 25178 describes a classification system for methods used primarily for the measurement of surface texture. It defines three classes of methods, illustrates the relationships between the classes, and briefly describes specific methods.

Geometrical product specifications (GPS) - Surface texture - Areal - Classification of methods for measuring surface texture

BS EN ISO 286-1:2010 几何产品规范（GPS）.线性尺寸公差的ISO编码系统.公差、偏差和配合的基础

This part of ISO 286 establishes the ISO code system for tolerances to be used for linear sizes of features of the following types: a) cylinder; b) two parallel opposite surfaces. It defines the basic concepts and the related terminology for this code system. It provides a standardized selection of tolerance classes for general purposes from amongst the numerous possibilities. Additionally, it defines the basic terminology for fits between two features of size without constraints of orientation and location and explains the principles of “basic hole” and “basic shaft”.

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Basis of tolerances, deviations and fits

BS EN ISO 10360-2:2009 产品几何量技术规范(GPS).坐标式测量机(CMM)的验收和再验证试验.测量线性尺寸用CMMs

This part of ISO 10360 specifies the acceptance tests for verifying the performance of a coordinate measuring machine (CMM) used for measuring linear dimensions as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the CMM. The acceptance and reverification tests given in this part of ISO 10360 are applicable only to Cartesian CMMs using contacting probing systems of any type operating in the discrete-point probing mode. This part of ISO 10360 does not explicitly apply to: - non-Cartesian CMMs; however, parties may apply this part of ISO 10360 to non-Cartesian CMMs by mutual agreement; - CMMs using optical probing; however, parties may apply this approach to optical CMMs by mutual agreement. This part of ISO 10360 specifies performance requirements that can be assigned by the manufacturer or the user of a CMM, the manner of execution of the acceptance and reverification tests to demonstrate the stated requirements, rules for proving conformance, and applications for which the acceptance and reverification tests can be used.

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs used for measuring linear dimensions

DB36/T 574-2010 自反力平衡荷载箱

规定了自反力平衡荷载箱的要求、试验方法、检验规则及标志、运输和贮存

Reflexive Balance Load Box

SN/T 0188.2-2010 进出口商品衡器鉴重规程.第2部分:衡器鉴重通则

本部分规定了以衡器对进出口商品进行重量鉴定的通则。 本部分适用于进出口商品的衡器鉴重。

Rules for the weight survey by weighing instrument on import and export commodities- Part 2: General rules for weight survey by weighing instrument

SN/T 0188.1-2010 进出口商品衡器鉴重规程.第1部分:术语

本部分规定了进出口商品衡器鉴重的有关术语和定义。 本部分适用于进出口商品衡器鉴重标准的制修订、技术文件的编写等方面。

Rules for the weight survey by weighing instrument on import and export commodities- Part 1: Terminology