N17 自动控制与遥控装置 标准查询与下载

ISO 10303-41:2005/cor 1:2008 工业自动化系统和集成.产品数据表示和交换.第41部分:集成通用资源:产品描述与支持原理;技术勘误1

This standard is about Industrial automation systems and integration - Product data representation and exchange - Part 41: Integrated generic resource: Fundamentals of product description and support; Technical Corrigendum 1

Industrial automation systems and integration — Product data representation and exchange — Part 41: Integrated generic resource: Fundamentals of product description and support TECHNICAL CORRIGENDUM 1

BS 5702-2:2008 变量用统计过程管理(SPC)图表指南.单值图表

This part of BS 5702 gives guidance on the application of control charts to individual observations. It demonstrates the benefits, versatility and usefulness of a simple but powerful pictorial method for monitoring, audit and surveillance with the objectives to control and improve many types of processes. These processes can, for example, be in industry, commerce, public service, health care, environment, food, information technology or finance. Case studies are included to illustrate this adaptability. It describes how and when to apply, select, construct, interpret and use, control charts: • generally, to individual measurements of a single characteristic arranged in a meaningful sequence; and • specifically, to particular cases of attribute data. This standard distinguishes between the use of control charts to achieve product control as opposed to steering a process (reducing variation and making estimates of, and securing progressive improvements in, process performance). This standard is aimed at all those concerned with statistical related initiatives based on individual observations and the continuous improvement of business processes.

Guide to statistical process control (SPC) charts for variables – Part 2: Charts for individual values

IEC TS 62492-1:2008 工业过程控制装置.辐射温度计.第1部分:辐射温度计的技术数据

This Technical Specification applies to radiation thermometry. It defines the technical data, i.e. metrological data to be given in data sheets and operating instructions for radiation thermometers with one wavelength range and one measurement field, to ensure that the data and terminology are used consistently. Technical data for radiation thermometers are frequently given using terms whose meaning is not clear and therefore open to misinterpretation. Moreover, the data are given for measuring conditions which are not standardised. Often, influence parameters and mutual interdependencies of technical data are not given. As a result, the user cannot easily compare the technical design and performance data of radiation thermometers and tests for compliance with the manufacturer's specifications are difficult to carry out. The purpose of this Technical Specification is to facilitate comparability and testability. Therefore, unambiguous definitions are stipulated for stating technical data under standardised measuring conditions. NOTE 1 Infrared ear thermometers are excluded from this Specification. NOTE 2 It is not compulsory for manufacturers and sellers of radiation thermometers to include ail items given in this Specification for a specific type of radiation thermometer. Only the relevant data should be stated and should comply with this Specification.

Industrial process control devices - Radiation thermometers - Part 1: Technical data for radiation thermometers

KS B ISO 15745-5:2008 工业自动化系统和集成.开放系统应用集成框架.第5部分:基于高级数据联接控制(HDLC)的控制系统用参考描述

이 규격은 통신 네트워크 프로파일과 HDLC에 기초한 제어시스템을 위한 장치 프로파일의 통

Industrial automation systems and integration-Open systems application intergration framework-Part 5:Reference description for HDLC-based control systems

ISO 10303-223:2008 工业自动化系统和集成.产品数据表示和交换.第223部分:应用协议:铸件用设计和制造产品信息的交换

This part of ISO 10303 specifies the use of the integrated resources necessary for the scope and information requiremcnts for exchange, archiving and sharing of design and manufacturing product information (bt cast parts. NOTE I The application activity model, in Annex F, provides a graphical rcpresentation ol'the processes and information flows which are the basis for the definition of the scope of this part oflSO 10303. The following are within the scope of this part of ISO 10303: -- the manufacturing ora cast part made by sand, die, and investment casting processes; -- parts that are to be manufactured by casting processes; -- design data for cast parts, including geometry, materials, tolerances, required physical and mechanical properties, required tests; -- casting features for defining shapes necessary for casting processes; NOTE 2 The casting feature set is defined in this part oflSO 10303. -- manufacturing features for defining shapes necessary for machining processes; -- manufacturing features for defining shapes necessary for casting process; .... explicit representation of the 3D shape of casting features through bounded geometry representations; -- geometric and dimensional tolerances of the parts being manufactured; materials, and properties of the parts being manufactured; -- characterization of products used to make cast parts, including moulds, dies, equipment, materials, and consumable items; --- customer order administrative data to track receipt of all order for a cast part to thc shop lloor, but not including tracking of the order on the shop floor; approval data to authorize the manufacture of a cast part; -- requisition administrative data to identify, requirements and track the status of materials and equipment needed to manufacture a cast part; -- work order data to track and identify the status of a cast part; -- tracking the state of raw stock for documenting the manufacturing history of a cast part; -- tracking a design exception notice ora cast part; NOTE 3 The design exception notice relates to discrepancies in the lkatures used to describe a cast pan's shape. -- process plans for parts that are made by sand, die, and investment casting processes: process data 1hr part routing which includes manufacturing process and setup sequencing; process data for operation; -- work instructions for the tasks required to manufacture a cast part, which include: -- references to the resources required to perform the work; .... the sequences of the work instructions; - relationships of the work to the part geometry.; -- specifications for patterns and die assemblies; -- input to and output from casting process simulation software; -- data exchange between customer and foundry, within the foundry, and between foundry and supplier; -- use of data for lbundry automation and shop floor control; -- use of data fbr archiving of design and manufacturing data for cast parts. NOTE 4 Data supported by this part of IS() 10303 might need to be archivcd to meet legal and regulator, requirements, and to meet quality objectives.

Industrial automation systems and integration - Product data representation and exchange - Part 223: Application protocol: Exchange of design and manufacturing product information for cast parts

GOST R 52980-2008 铁路用电气、电子、可编程电子安全相关系统设施的功能安全性.软件要求

Functional safety of electrical, electronic, programmable electronic safety-related systems applications for railways. Software requirements

ASTM D6672-08 格式化驱动数值控制的切布机的切割数据的标准实施规程

This practice provides a common format that allows a computer design system to generate data that an output device can accurately reproduce independent of the hardware manufacturer.1.1 This practice specifies a data format for numerically-controlled cutting machines for fabric. 1.2 This standard uses a subset of the defined instruction set defined in ANSI/EIA-274-D in addition to the codes defined by this practice. 1.3 This practice does not support curve interpolation or definitions. All curves are represented by discrete vectors (stroked) and are dependent on the resolution of the CAD software. 1.4 This practice requires that all coordinates are absolute, not relative. 1.5 This practice only supports positive coordinates that are measured from a single X-Y origin point with coordinates (0,0). The origin point is specified as the lower left corner of the cut file. 1.6 This practice intends to transfer a static image with no provision for editing. 1.7 This practice imposes no limits on the width or length of the cut data. Physical limitations imposed by the hardware and their effects on the output are the responsibility of the hardware manufacturer. 1.8 This practice does not support bite commands or any methods that insert multiple origin points or floating coordinate systems. 1.9 This practice does not support notch tools. 1.10 This practice does not support pattern matching. 1.11 This practice limits the cut file to contain a single block of data demarked by a compatible header and terminator. Multiple blocks of data in a single file are not allowed. 1.12 Any commands found in the cut file that are not defined by this standard shall be ignored. 1.13 The intended application of this practice is limited to the class of output devices found in the sewn product industries that produce apparel, textiles, upholstery, and others that use soft or semi-rigid materials. 1.14 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Formatting Cutting Data to Drive Numerically Controlled Fabric Cutting Machines

KS C IEC 60870-1-5:2007 远动设备和系统.第1.5部分:通用事项.有干扰时用IEC 60870-5规约MODEM传输过程中数据一致性的影响

이 규격은 모뎀 전송 절차의 영향을 다룬다.

Telecontrol equipment and systems－Part 1－5：General considerations－Influence of modern transmission procedures with scramblers on the data integrity of transmission systems using the protocol IEC 60870－5

KS C IEC 60870-1-1:2007 远动设备和系统.第1部分:通用事项.第1节:通用原则

이 규격은 지형적으로 널리 분산된 프로세스의 감시와 제어를 위한 암호화된 비트 직렬 데이터

Telecontrol equipment and systems－Part 1：General considerations－Section one：General principles

KS C IEC 60870-6-505:2007 远动设备和系统.第6-505部分:与ISO标准和ITU-T建议兼容的远动协议.TASE.2用户指南

이 기술 보고는 다음의 TASE.2 국제 규격들의 사용에 관한 지침들의 집합을 제공한다.

Telecontrol equipment and systems－Part 6－505：Telecontrol protocols compatible with ISO standards and ITU－T recommendations－ASE.2 User guide

KS C IEC 60870-1-3:2007 远动设备和系统.第1部分:通用事项.第3节:术语汇编

이 규격은 지리적으로 광범위하게 퍼진 처리들의 감시 및 제어를 위해 부호화된 비트 직렬 데

Telecontrol equipment and systems－Part 1：General considerations－Section 3：Glossary

DIN EN 60870-5-104:2007 遥控设备和系统.第5-104部分:传输协议.使用标准传送文件集IEC 60870-5-104:2006所列标准的网络存取

Telecontrol equipment and systems - Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles (IEC 60870-5-104:2006); German version EN 60870-5-104:2006

KS B ISO 10303-239:2007 工业自动化系统和集成.产品数据表示和交换.第239部分:应用协议:产品生命周期保证和应用模式

이 규격의 적용범위는 다음과 같다.a) 복합제품 및 지원솔루션을 정의하기 위한 정보

Industrial automation systems and integration－Product data representation and exchange－Part 239：Application protocol：Product life cycle support

KS B ISO 15531-1:2007 工业自动化系统和集成.工业生产管理数据.第1部分:总揽

이 규격은 전체 산업 프로세스에 걸쳐 제조 관리 정보의 표현을 위한 특성을 규정한다. 공장

Industrial automation systems and integration－Industrial manufacturing management data－Part 1：General overview

KS B ISO 18629-1:2007 工业自动化系统和集成.工艺规范语言.第1部分:总览和基本原则

이 규격의 적용범위는 전체 KS B ISO 18629의 개요 및 프로세스 명세 언어의 기본

Industrial automation systems and integration－Process specification language－Part 1：Overview and basic principles

KS B ISO 10303-25:2007 工业自动化系统和集成.产品数据表示和交换.第25部分:执行办法:从EXPRESS到XML汇编

이 규격의 적용범위는 다음과 같다.a) XMI 표준에 따르는 교환을 목적으로 EXPRE

Industrial automation systems and integration－Product data representation and exchange－Part 25：Implementation methods：EXPRESS to XMI binding

ISO 17874-5:2007 放射性物质用遥控装置.第5部分:遥控钳

The purpose of this part of ISO 17874 is to provide guidance for the selection, installation and use of manually-operated remote handling tongs within nuclear installations. This part of ISO 17874 covers only the specific engineering aspects of manually-operated remote handling tongs and their interfaces with the nuclear facilities in which these devices are to be installed. Specifically, it does not address design options concerning aspects such as the process and general maintenance arrangements that lead to the selection of any particular type of remote handling device.

Remote handling devices for radioactive materials - Part 5: Remote handling tongs

IEC 57/856/DTS:2007 IEC 60870-5-604 TS, Ed. 1:遥控设备和系统.第5-604部分:IEC 60870-5-104配套标准的一致性试验案例

IEC 60870-5-604 TS, Ed. 1: Telecontrol equipment and systems - Part 5-604: Conformance test cases for the IEC 60870-5-104 Companion Standard

KS B ISO 15926-1:2006 工业自动化系统和集成.包括油气生产设施的加工设备使用寿命数据的集成.第1部分:概要和基本原则

이 규격은 공정 플랜트의 엔지니어링, 건설, 운영과 연관된 정보의 표현을 규정한다.

Industrial automation systems and integration－Integration of life-cycle data for process plants including oil and gas production facilities－Part 1：Overview and fundamental principles

KS B ISO 16100-2:2006 工业自动化系统与集成.制造软件互操作性能力建规.第2部分:建规方法论

이 규격은 제조 소프트웨어 성능의 구성 프로파일에 대한 방법론을 설명하고, 제조 영역에서

Industrial automation systems and integration-Manufacturing software capability profiling for interoperability-Part 2:Profiling methodology