N41 制片设备 标准查询与下载

BS ISO 26428-9:2009 数字电影院(D-cinema)发行母带.3级图象像素结构.串行数字接口信号格式

Digital cinema (D-cinema) distribution master - Image pixel structure level 3. Serial digital interface signal formatting

ANSI/CEA 639-2010 客户摄录相机或摄影机低亮度性能

The purpose of this document is to specify the recommended method and test conditions to determine the low light sensitivity of consumer camcorders operating on the North American 525 line, 60 Hz NTSC color video standard. Utilizing standard engineering video test equipment, test charts and simple adjustable lighting, the low light sensitivity of consumer-grade camcorders will be determined. The low light sensitivity of the unit under test will be expressed in lux.

Consumer Camcorder or Video Camera Low Light Performance

ISO 26428-9:2009 数字电影院(D-cinema)发行母带.第9部分:图像象素点对3.串行数字接口信号格式

Digital cinema (D-cinema) distribution master - Part 9: Image pixel structure level 3 - Serial digital interface signal formatting

BS ISO 26428-2:2008 数字电影院(D-cinema)发行母带.音频特性

Digital cinema (D-cinema) distribution master - Audio characteristics

JB/T 6168-2007 16mm电影摄影机 白昼装片型片夹尺寸

本标准规定了容量为15m(50ft)、30m(100ft)、60m(200ft)、120m(400ft)的16mm电影胶片用白昼装片片夹的尺寸和特性。 高速摄影机的片夹应确保平衡，但本标准不适用于高速摄影机。

Spools, daylight loading type for 16mm motion-picture cameras. Dimension

ANSI/UL 122-2007 摄影设备(推荐日期2006-11-17)

Proposed changes to the maximum normal load conditions for household use photoflash equipment.

Photographic Equipment (Proposal dated 11/17/06)

UL 122-2007 摄影设备安全性用UL标准.第5版本

These requirements cover electrically-operated, cord-connected photographic equipment rated 300 V or less, and permanently connected photographic equipment rated 600 volts or less, intended for household or commercial use on interior wiring systems in accordance with the National Electrical Code, NFPA 70. These requirements also cover battery-powered photographic equipment involving a risk of fire or electric shock. These requirements cover motion picture projectors, including those intended for use in motion picture theaters; still picture projectors; equipment intended for use in taking photographs; accessories intended for use with or installation upon picture projectors or intended to be employed in viewing, editing or handling films, slides, pictures, drawings, or similar stationary graphic material; cameras; chemical replenishers; contact printers; enlargers; exposure meters; film copiers, film cutters, film dryers; film editors; household film viewers; film and paper processors; film rewinders, film strip projectors; film strip projector-phonograph combinations; film strip projector-tape player combinations; motor-operated projector screens; silent and sound motion picture projectors; print dryers; print processors; printing easels; opaque projectors; overhead projectors; photoflash equipment; photographic timers; photometers, flash cameras; slide projectors; silver recovery units; slide projector-phonograph combinations; slide projector-tape player combinations; slide sorters; slide viewers; stripping and line-up tables; video printers; and similar equipment. These requirements do not cover commercial film viewers and dark room safelights, which are evaluated under the requirements for fixtures and portable lamps; projector tables, which are evaluated under the requirements for utility tables; microfilm and micrographic equipment, which are evaluated under the requirements for office appliances and business equipment; or portable photographic lamps and floodlights, which are evaluated under the requirements for stage and studio lighting fixtures. Electric photographic equipment intended for use in a hazardous location as defined in the National Electrical Code is evaluated on the basis of its compliance with the requirements in this standard, and other appropriate examination and tests to determine whether it is acceptable for the purpose. A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.

UL Standard for Safety for Photographic Equipment Fifth Edition

KS A ISO 16067-1:2005 摄影.摄影影像的电子式扫描仪.空间分辨率测定.第1部分:反射式扫描仪

이 규격은 사진 출력물을 위한 연속톤 전자식 스캐너의 공간 해상도 측정법과 보고 방법에

Photography-Spatial resolution measurements of electronic scanners for photographic image-Part 1:Scanners for reflective media

KS A ISO 16067-2:2005 摄影.摄影影像的电子式扫描仪.空间分辨率测定.第2部分:胶卷扫描仪

이 규격은 연속톤의 네거티브와 리버셜(reversal) 필름용 전자식 스캐너의 공간 해상도

Photography-Electronic scanners for photographic images-Spatial resolution measurement-Part 2:Film scanners

ISO 1793:2005 电影摄影.16mm电影放映机用片夹(容量小于等于610m、尺寸38cm).尺寸

本标准规定了16 mm电影放映机片夹(最大并包括610 m容量：38 cm型)的尺寸和特性。

Cinematography - Reels for 16 mm motion-picture projectors (up to and including 610 m capacity: 38 cm size) - Dimensions

BS ISO 16067-1:2003 摄影.摄影成像用电子扫描仪的空间分辨率测量.反射介质用扫描仪

This part of ISO 16067 specifies methods for measuring and reporting the spatial resolution of electronic scanners for continuous tone photographic prints. It is applicable to both monochrome and colour print scanners.

Photography. Spatial resolution measurements for electronic scanners for photographic images. Scanners for reflective media

BS ISO 16067-2:2004 摄影.摄影图像用电子扫描仪.空间分辨率测量.胶片扫描仪

This International Standard specifies methods for measuring and reporting the spatial resolution of electronic scanners for continuous tone photographic negatives and reversal (e.g. slide) films. The International Standard applies to both monochrome and colour film scanners.

Photography. Electronic scanners for photographic images. Spatial resolution measurements. Film scanners

ANSI/I3A IT10.2000-2004 摄影.数字静物摄影机.JPEG 2000 DSC轮廓

This document specifies a profile of JPEG 2000 suitable for use in digital still cameras (DSC profile). The profile specifies the following items: úDecoder/Reader conformance requirements for software and hardware devices (including the camera itself) that desire to read images captured on JPEG 2000 based digital still cameras (DSC). This includes both codestream and file format requirements. ú Encoder/Writer conformance requirements for the files created by digital still cameras. This includes both codestream and file format requirements, and specifies: ú Required file format úMetadata format and required/recommended metadata fields úSupported colorspaces ú Storage of audio annotations.

Photography - Digital still cameras - JPEG 2000 DSC profile

KS A ISO 1039:2003 电影摄影.电影胶卷和磁性胶卷的核心.尺寸

이 규격은 영화용 필름과 자기 필름 롤을 감기 위한 코어의 크기와 규격에 관한 것이다.

Cinematography－Cores for motion－picture and magnetic film rolls－Dimensions

KS A ISO 162:2003 电影摄影.35mm磁片上三声轨、四声轨或六声轨和17.5mm磁片上单声轨录音和磁头隙缝.位置和宽度尺寸

이 규격은 35 mm 자기 필름(ISO 491 참조)에의 3, 4, 6트랙 녹음과 17.5

Cinematography－Head gaps and sound records for three－, four－, or six－track magnetic sound records on 35 mm and single－track on 17.5 mm motion－picture film containing no picture－Positions and width dimensions

BS ISO 10330:2002 摄影技术.同步闪光器.摄影机和闪光装置的点火电路和连接器.电特性及其试验方法

This International Standard specifies the electrical requirements of the camera synchronizer, the ignition circuit in the photoflash unit and the cable to connect these, and the test methods to secure positive firing of the photoflash unit.

Photography - Synchronizers, ignition circuits and connectors for cameras and photoflash units - Electrical characteristics and test methods

ISO 14535:2001 摄影 电子扫描仪及成像胶片和像纸卷的室光负载包装 尺寸及有关要求

This International Standard applies to room-light loading packages either containing photographic film or paper rolls for electronic scanners or image-setting devices. It specifies the dimensions of the package and its contents, critical equipment interfacing features, and package marking. The prime aim of this International Standard is to ensure compatibility between room-light loading packages and the equipment in which it is used. Two types of package are recognized. One type uses a rigid flange into which mandrils on the exposing device are inserted. The other type uses a flexible flange and relies on the exposing equipment design to hold the roll correctly in the machine.

Photography - Room-light loading packages for electronic scanners and image-setting film and paper rolls - Dimensions and related requirements

ISO 17121:2000 电影 影片和电视生产用工作场所 视听条件的要求

This International Standard specifies the requirements for work stations used for electronic image and sound production in film and video facilities and broadcasting organizations. It provides assistance in achieving a consistent and critical evaluation of television and video programme material with a view to facilitating programme exchange in commonly used review conditions. This International Standard is not applicable to work stations based on general purpose office computers or film production by traditional methods.

Cinematography - Work stations used for film and video production - Requirements for visual and audio conditions

ISO 1007:2000 摄影 135胶卷及暗盒 规范

This International Standard specifies the following: — dimensions of film lengths; — latent-image frame numbering; — latent-image digital bar-codes to identify the film DX number; — dimensions of daylight-loading film magazines for use with 135-size cameras; — a magazine bar-code that identifies the film's DX number as well as the number of exposures; — camera auto-sensing areas, which provide an electrically readable encodement of film speed, number of exposures, and recommended exposure latitude for use with appropriately designed cameras; — an information panel on which the film identification, speed and number of exposures are visible through a window in the back of appropriately designed cameras; — film pull-out force specification; — film-spool attachment strength specification. This International Standard is not intended to apply to "bulk" 35-mm film used for reloading into 135-size magazines, nor to the reloadable magazines themselves. Also, this standard does not apply to 135-size film and magazines that are used in single-use camera applications.

Photography - 135-size film and magazine - Specifications

ANSI/AIIM/ISO 10198:1999 16 mm微缩胶片用旋转摄像机.机械和光学特性

Defines the mechanical and optical characteristics of rotary cameras used for recording documents onto 16 mm microfilms as specified in ANSI/AIIM MS14-1988.

Rotary Cameras for 16mm Microfilm – Mechanical and Optical Characteristics