P20 工程结构综合 标准查询与下载
共找到 399 条与 工程结构综合 相关的标准，共 27 页
General principles on reliability for structures
- ICS
- 91.080.01
- CCS
- P20
- 发布
- 2015-03
- 实施
本规程适用于新建及既有建筑结构的动力性能检测。
Technical specification for dynamic performance testing of building structures
- ICS
- 91.080.01
- CCS
- P20
- 发布
- 2014-12-15
- 实施
- 2015-01-01
本规程适用于抗震设防烈度为6～8度地区的装配整体式混凝土框架结构、装配整体式混凝土框架-现浇剪力墙结构、装配整体式混凝土剪力墙结构及装配整体式混凝土部分框支剪力墙结构的民用建筑， 房屋建筑的最大高度应符合本规程的有关规定。
Code for design of assembled monolithic concrete structures
- ICS
- 91.080
- CCS
- P20
- 发布
- 2014-09-16
- 实施
- 2014-10-01
Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions; German version EN 1991-1-7:2006/A1:2014
- ICS
- 91.010.30
- CCS
- P20
- 发布
- 2014-08
- 实施
Execution of special geotechnical works - Ground anchors; German version EN 1537:2013
- ICS
- 93.020
- CCS
- P20
- 发布
- 2014-07-01
- 实施
Buildings and civil engineering works - Sealants - Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling
- ICS
- 11.040.70;91.100.50
- CCS
- P20
- 发布
- 2014-07
- 实施
Sustainability in buildings and civil engineering works - Guidelines on the application of the general principles in ISO 15392
- ICS
- 91.040.01
- CCS
- P20
- 发布
- 2014-04
- 实施
This British Standard gives recommendations on the management of geotechnical data throughout the life cycle of civil engineering and building projects at both an organizational and project level. It also gives recommendations on the collection, storage, archiving, sharing and transfer of logical data. This British Standard is intended for engineering geologists, geotechnical and environmental engineers, geotechnical data managers, IT managers and project managers.
Code of practice for the management of geotechnical data for ground engineering projects
- ICS
- 01.040.93;93.080.01
- CCS
- P20
- 发布
- 2014-03-31
- 实施
- 2014-03-31
Buildings and civil engineering works - Vocabulary - Part 2: Contract terms
- ICS
- 01.040.91;91.010.20
- CCS
- P20
- 发布
- 2014-03
- 实施
Buildings and civil engineering works - Vocabulary - Part 1: General terms
- ICS
- 01.040.91;01.040.93;91.010.01;93.010
- CCS
- P20
- 发布
- 2014-03
- 实施
Building Construction. Service Life Planning. Service Life Planning using Building Information Modelling
- ICS
- 91.040.01
- CCS
- P20
- 发布
- 2014-01-31
- 实施
- 2014-01-31
La présente partie de l'ISO 22282 traite des exigences relatives aux essais de pompage réalisés dans le cadre d'une mission de reconnaissance géotechnique conformément à l'EN 1997-1 et l'EN 1997-2.En principe, un essai de pompage consiste à rabattre le niveau piézométrique de la nappe par pompage à partir d'un puits (puits d'essai), et mesurer le débit pompé et le niveau d'eau dans le puits d'essai et les piézomètres, avant, pendant et après le pompage, en fonction du temps.La présente partie de l'ISO 22282 s'applique aux essais de pompage réalisés sur des formations aquifères dont la perméabilité est telle que le pompage à partir d'un puits peut créer un r
Geotechnical investigation and testing - Geohydraulic testing - Part 4 : pumping tests
- ICS
- 93.020
- CCS
- P20
- 发布
- 2014-01-18
- 实施
- 2014-01-18
Building Construction - Service Life Planning - Part 4: Service Life Planning using Building Information Modelling
- ICS
- 91.040.01
- CCS
- P20
- 发布
- 2014-01
- 实施
이 표준은 문, 창 및 기타 유리 단위체, 지상으로의 열전달에 관련된 부재, 그리고 공기가 통하도록설계된 부재를 제외한 건물 부재와 요소의 열저항과 열투과율의 계산방법을 제시한다.이 계산방법은 응용적 측면에서의 재료와 관련 제품의 적절한 설계 열전도도 및 설계 열저항에 근거한다.이 방법은 열적 균질층(공기층을 포함하는)을 구성하는 부재와 요소에 적용된다.또한 이 표준은 부속서 D에 주어진 보정항을 이용하여, 금속 조임쇠의 효과를 가지고 있는 불균질층을 포함하고 있는 요소에 사용하기에 적절한 방법을 제공한다. 금속에 의한 연결관 단열공간의 경우에는 이 표준의 범주를 벗어난다.
Building components and elements — Thermal resistance and thermal transmittance — Calculation method
- ICS
- 91.060.01;91.120.10
- CCS
- P20
- 发布
- 2013-12-31
- 实施
- 2013/12/31
This International Standard specifies methods for the determination of snow load on roofs. It can serve as a basis for the development of national codes for the determination of snow load on roofs. National codes should supply statistical data of the snow load on ground in the form of zone maps, tables, or formulae. The shape coefficients presented in this International Standard are prepared for design application, and can thus be directly adopted for use in national codes, unless justification for other values is available.
Bases for design of structures.Determination of snow loads on roofs
- ICS
- 91.080.01
- CCS
- P20
- 发布
- 2013-12
- 实施
This Technical Report provides a compilation of terms and definitions of concepts related to both the construction and use of a building or civil engineering works, and the effect of such construction works on sustainability and sustainable development, as applied in the documents of ISO/TC 59/SC 17,Sustainability in buildings and civil engineering works.
Sustainability in buildings and civil engineering works.A review of terminology
- ICS
- 01.040.91;91.040.01
- CCS
- P20
- 发布
- 2013-11-15
- 实施
Geosynthetic barriers - Characteristics required for use in transportation infrastructure; German version EN 15382:2013
- ICS
- 59.080.70;93.080.20
- CCS
- P20
- 发布
- 2013-11
- 实施
Execution of special geotechnical works - Ground anchors; German version EN 1537:2013
- ICS
- 93.020
- CCS
- P20
- 发布
- 2013-09-01
- 实施
Bases for design of structures. Loads, forces and other actions. Seismic actions on nonstructural components for building applications
- ICS
- 91.080.01;91.120.25
- CCS
- P20
- 发布
- 2013-08-31
- 实施
- 2013-08-31
This International Standard establishes the means to derive seismic actions on nonstructural components and systems (NSCS) supported by or attached to new or existing buildings. It also provides procedures for the verification of NSCS seismic capacities. NSCS include architectural elements, mechanical and electrical systems, and building contents.
Bases for design of structures.Loads, forces and other actions.Seismic actions on nonstructural components for building applications
- ICS
- 91.080.01;91.120.25
- CCS
- P20
- 发布
- 2013-08-01
- 实施
