P21 土石方、遂道工程 标准查询与下载

DB11/T 1630-2019 城市综合管廊工程施工及质量验收规范

Code for construction and quality acceptance of urban comprehensive pipe gallery project

DB51/T 2515-2018 钢管混凝土桥梁焊接节点疲劳技术规程

本规程规定了钢管混凝土桥梁焊接节点总则、术语和符号、材料、连接类别与疲劳强度、荷载及疲劳应力幅、疲劳强度验算、构造与工艺、维护管理等内容。 本规程适用于圆形钢管混凝土桁式结构桥梁焊接节点和接头的疲劳设计。

Technical specification for fatigue of welded joints of concrete filled steel tube bridges

DB42/T 1343-2018 顶管法管道穿越工程技术规程

Technical regulations for pipe crossing engineering with pipe jacking method

DIN EN ISO 18674-3:2018 岩土工程勘察和试验.采用现场仪表的岩土工程监测.第3部分:随线位移测量:倾角仪(ISO 18674-3-2017);德文版本EN ISO 18674-3-2017

EN ISO 18674-3 applies to the measurement of displacements across a measuring line by means of inclinometers carried out for geotechnical monitoring. ISO 18674-3 also refers to deflectometers (see Annex B) to supplement inclinometers for the determination of horizontal displacements across horizontal measuring lines.

Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers (ISO 18674-3:2017); German version EN ISO 18674-3:2017

BS EN ISO 14688-2:2018 土工技术调查研究和试验.土壤的识别和分类.分类原则

Geotechnical investigation and testing. Identification and classification of soil. Principles for a classification

T/CDSA 305.16-2018 盾构维护高气压作业规程

盾构维护高气压作业与潜水施工作业性质非常相近，除作业环境不同外，均为在高气压下作业，进仓作业人员要呼吸与工作压力相等的高压气体。因此，在工作压力大于0.12MPa的压缩空气和工作压力更大（≥0.6MPa）的混合气盾构维护作业中，由经过高气压医学检查、培训及锻炼，适应高气压作业的潜水员或相应的工作人员来完成是十分必要的。在目前国内外尚无统一的作业标准情况下，在潜水行业内起草本规程，可以规范、指导盾构维护高气压作业，提高行业内此项操作的技能水平，为作业人员安全施工提供保障。 本规程适用于盾构高气压环境下换刀、焊接、切割和检测等维护作业，适用于呼吸压缩空气或混合气的盾构维护常规高气压作业。 盾构高气压下换刀、焊接、切割和检测等维护作业除应符合本规程规定之外，尚应符合国家现行有关标准的规定。

Operating regulations for tunnel boring machine maintenance under hyperbaric pressure

ISO 18674-3:2017 岩土工程勘察和试验.采用现场仪表的岩土工程监测.第3部分:随线位移测量:倾角仪

This document specifies the measurement of displacements across a line by means of inclinometers carried out for geotechnical monitoring. General rules of performance monitoring of the ground, of structures interacting with the ground, of geotechnical fills and of geotechnical works are presented in This document also refers to deflectometers (see Annex B) to supplement inclinometers for the determination of horizontal displacements across horizontal measuring lines. NOTE In general, there are two independent displacement components acting across measuring lines. Inclinometers allow the determination of the two components for vertical measuring lines. For horizontal lines, inclinometers are limited to the determination of the vertical component only. If applied in conjunction with ISO 18674-2, this document allows the determination of displacements acting in any direction. This document is applicable to: — checking geotechnical designs in connection with the Observational Design procedure; — monitoring of geotechnical structures prior to, during and after construction (e.g. natural slopes, slope cuts, embankments, excavation walls, foundations, dams, refuse dumps, tunnels); — deriving geotechnical key parameters (e.g. from results of pile load tests or trial tunnelling); — identification and monitoring of active shear planes in the ground. NOTE This document fulfils the requirements for the performance monitoring of the ground, of structures interacting with the ground and of geotechnical works by the means of inclinometers as part of the geotechnical investigation and testing in accordance with References [1] and [2].

Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 3: Measurement of displacements across a line: Inclinometers

JG/T 518-2017 基桩动测仪

Foundation pile dynamic tester

DIN EN ISO 18674-2:2017 岩土工程勘察和试验.采用现场仪表的岩土工程监测.第2部分:随线位移测量:引伸计(ISO 18674-2-2016);德文版本EN ISO 18674-2-2016

Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers (ISO 18674-2:2016); German version EN ISO 18674-2:2016

PD CEN/TS 17006:2016 土方工程-连续压实控制(CCC)

This technical specification provides guidance, specifications and requirements on the use of Continuous Compaction Control (CCC) as a quality control method in earthworks by means of roller integrated dynamic measuring and documentation systems. The CCC method is suitable for soils, granular materials and rockfill materials which can be compacted using vibratory rollers. NOTE A continuous Compaction Control (CCC) technology based on the measure of propel energy necessary to overcome the rolling resistance is also available and can be used as a quality control method in earthworks. The propelling power of the compactor provides an indication of the material stiffness and it is measured as a function of the machine ground speed, slope angle and rolling resistance. This method is not included in this document.

Earthworks - Continuous Compaction Control (CCC)

BS EN ISO 22477-10:2016 岩土工程勘察和试验. 岩土结构试验. 桩试验: 快速荷载试验

Geotechnical investigation and testing. Testing of geotechnical structures. Testing of piles: rapid load testing

ISO 18674-2:2016 岩土工程勘察和试验. 采用现场仪表的岩土工程监测. 第2部分: 随线位移测量: 引伸计

Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers

BS EN ISO 22476-15:2016 岩土工程勘察和试验. 现场试验. 随钻测量

Geotechnical investigation and testing. Field testing. Measuring while drilling

DB51/T 2243-2016 公路瓦斯隧道技术规程

本规程规定了公路瓦斯隧道分类标准、勘察方法、设计措施、施工措施及设备配置、揭煤防突措施、风险评估指标等。 本规程适用于公路瓦斯隧道勘察、设计、施工、运营管理、风险评估和质量检验与验收。

Technical specification for highway gas tunnel

PNST 132-2016 一般用途汽车道路. 道路施工用土工合成材料. 土工合成材料抗微生物性的测定方法

Automobile roads of general use. Geosynthetic for road construction. Method for determining the microbiological resistance of geosynthetics

NF P94-505-1*NF EN ISO 18674-1:2015 岩土工程勘察和试验. 采用现场仪表的岩土工程监测. 第1部分: 通用规则

Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 1 : general rules

DIN EN 1538:2015 专用土工工程施工.隔水墙.德文版本EN 1538-2010+A1-2015

Execution of special geotechnical work - Diaphragm walls; German version EN 1538:2010+A1:2015

DIN EN ISO 18674-1:2015 岩土工程勘察和测试. 使用现场仪表进行的岩土监测. 第1部分: 总则 (ISO 18674-1-2015); 德文版本EN ISO 18674-1-2015

Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 1: General rules (ISO 18674-1:2015); German version EN ISO 18674-1:2015

DIN EN 12699:2015 特殊土工作业.送入桩;德文版本EN 12699-2015

Execution of special geotechnical works - Displacement piles; German version EN 12699:2015

BS 8002:2015 挡土结构实施规范

Code of practice for earth retaining structures