P26 金属结构工程 标准查询与下载
共找到 501 条与 金属结构工程 相关的标准，共 34 页
Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue; German version EN 1999-1-3:2007 + A1:2011
- ICS
- 91.010.30;91.080.10
- CCS
- P26
- 发布
- 2011-11
- 实施
This European Standard specifies requirements for conformity assessment of performance characteristics for structural steel and aluminium components as well as for kits placed on the market as construction products. The conformity assessment covers the manufacturing characteristics, and where appropriate the structural design characteristics. This European Standard covers also the conformity assessment of steel components used in composite steel and concrete structures. The components can be used directly or in construction works or as structural components in the form of kits. This European Standard applies to series and non-series structural components including kits. The components can be made of hot rolled or cold formed constituent products or constituent products produced with other technologies. They may be produced of sections/profiles with various shapes, flat products (plates, sheet, strip), bars, castings, forgings made of steel and aluminium materials, unprotected or protected against corrosion by coating or other surface treatment, e. g. anodising of aluminium. This European Standard covers structural cold formed members and sheeting as defined in EN 1993-1-3 and EN 1999-1-4. This European Standard does not cover conformity assessment of components for suspended ceilings, rails or sleepers for use in railway systems. NOTE For certain steel and aluminium components, particular specifications for performance and other requirements have been developed. The particular specifications may be issued as an EN or as Clauses within an EN. An example is given in EN 13084-7 for single wall steel chimneys and steel liners. Such particular specifications will take precedence in case of non-compliance with the requirements of this European Standard.
Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-11
- 实施
Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting; German version EN 1999-1-4:2007/A1:2011
- ICS
- 91.010.30;91.080.10
- CCS
- P26
- 发布
- 2011-11
- 实施
Execution of steel structures and aluminium structures - Part 2 : technical requirements for steel structures.
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-10-01
- 实施
- 2011-10-21
Execution of steel structures and aluminium structures - Part 2 : technical requirements for steel structures.
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-10-01
- 实施
Technical specifications for high-strength bolted connections of steel structures
- ICS
- CCS
- P26
- 发布
- 2011-10-01
- 实施
- 2011-10-01
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures; German version EN 1090-2:2008+A1:2011
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-10
- 实施
Application technical specification for corrugated web steel structure
- ICS
- CCS
- P26
- 发布
- 2011-09-01
- 实施
- 2011-09-01
本标准规定了轻钢结构拆装式活动板房（以下简称“活动板房”）的术语和定义、分类与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以轻钢结构为承重结构，由彩钢夹芯板或玻镁平板等作为围护结构的拆装式临时用房，使用年限一般不超过五年。
Light steel structure disassembled prefabricated house
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-08-22
- 实施
- 2011-11-15
National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 1-12: Additional rules for the extention of EN 1993 up to steel grades S700
- ICS
- 91.010.30;91.080.10
- CCS
- P26
- 发布
- 2011-08
- 实施
本规程适用于大气环境中的新建建筑钢结构的防腐蚀设计、施工、验收和维护。
Technical specification for anticorrosion of building steel structure
- ICS
- CCS
- P26
- 发布
- 2011-07-13
- 实施
- 2012-03-01
本标准规定了建筑工程用索（以下简称拉索）的术语和符号、分类、代号与标记、一般要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于建筑工程各类结构用索。
Cable for building engineering
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-07-13
- 实施
- 2012-02-01
本规程适用于工业与民用建筑和构筑物中拱形钢结构的设计、制作、安装及验收。
Technical specification for steel arch structure
- ICS
- CCS
- P26
- 发布
- 2011-07-04
- 实施
- 2012-05-01
本标准规定了水工金属结构技术术语及其基本定义。 本标准适用于水利水电工程闸门、阀门、拦污栅、压力钢管、启闭机和清污机等水工金属结构的设计、制作、安装及检验等。
Terms of hydro steel structure
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-06-01
- 实施
- 2011-09-01
本工程适用于一般工业与民用建筑所采用的以受弯为主的波纹腹板钢构件或波纹腹板钢混凝土组合构件。
Technical specification for steel structures with corrugated webs
- ICS
- CCS
- P26
- 发布
- 2011-05-31
- 实施
- 2011-09-01
1 本文规定了建筑结构用离心工艺制造铸钢管的牌号表示法、技术要求、制造工艺与交货状态、试验方法、检验规则及标识、包装和质量证明书等。 2 本标准适用于离心铸造工艺生产的铸钢管（以下简称铸钢管），产品主要用于建筑钢结构，塔栀结构与桥梁结构等。
Casting steel tubes for building structures
- ICS
- 91.080.10
- CCS
- P26
- 发布
- 2011-05-09
- 实施
- 2011-10-01
National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 4-2: Tanks
- ICS
- 23.020.10;91.010.30;91.080.10
- CCS
- P26
- 发布
- 2011-05
- 实施
Technical specification for light steel frame fixed formwork shear wall structure
- ICS
- CCS
- P26
- 发布
- 2011-03-01
- 实施
- 2011-03-01
本规程适用于以冷弯薄壁型钢为主要承重构件，层数不大于3层，檐口高度不大于12m的低层房屋建筑的设计、施工及验收。
Technical specification for low-rise cold-formed thin-walled steel buildings
- ICS
- CCS
- P26
- 发布
- 2011-01-28
- 实施
- 2011-12-01
1.1 This specification covers the minimum requirements for the installation of interior nonstructural steel framing and furring members designed to receive screw-attached gypsum panel products. The steel framing and furring members covered in this specification are limited to those complying with Specification C645. 1.2 Details of construction for a specific assembly to achieve the required fire resistance, sound or acoustic rating shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing, sound or acoustic laboratories. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
- ICS
- 91.100.10 (Cement. Gypsum. Lime. Mortar)
- CCS
- P26
- 发布
- 2011
- 实施
