P33 居住与公共建筑工程 标准查询与下载

NF P25-204-2:2013 建筑工程 - 百页窗和百叶帘的安装 - 第2部分: 特殊管理标准条款合同单

Building works - Installation of shutters and blinds - Part 2: contract bill of special administrative model clauses

SB/T 10898-2012 商贸交易功能区评价规范

Evaluation Specifications for Commercial Transaction Functional Areas

BS PAS 69:2013 机动车防撞围栏的选择、安装和使用导则

Guidance for the selection, installation and use of vehicle security barrier systems

CECS 339-2013 地源热泵式沼气发酵池加热技术规程

本规程适用于没有沼气发电余热等其他廉价热源、采用中温发酵工艺新建和改、扩建的大、中型沼气发酵池的地源热泵加热系统工程设计、施工及验收。

Technical specification for heating biogas reactor by ground source heat pump

DB34/T 1923-2013 医疗建筑智能化系统技术规范

Technical specification for medical building intelligent system

JGJ 155-2013 种植屋面工程技术规程

本规程适用于新建、既有建筑屋面和地下建筑顶板种植工程的设计、施工质量验收和维护管理。

Technical specification for green roof

BS EN 13084-7:2012 独立式烟囱. 用于单层壁钢制烟囱和钢制内衬的圆柱形钢结构产品规范

Free-standing chimneys. Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners

DB44/T 1119-2013 室内装饰感应推拉门

本标准规定了室内装饰感应推拉门的术语和定义、产品分类、要求、试验方法、检验规则和标志、包装、运输与贮存。 本标准适用于室内装饰用铝合金门框的感应推拉门。

Interior decoration sensor sliding door

DB34/T 1853-2013 安徽省高速公路服务区建筑设计规范

为更好地做好公路服务区的设计工作，更好地为主体工程做好配套工作特制定本标准。 本标准适用于新建、扩建和改建的高速公路服务区的建筑设计。 高速公路的停车区和公路服务区也可参照本标准进行设计。

Specifications for architectural design of expressway service areas in Anhui Province

DB11/T 970-2013 装配式剪力墙住宅建筑设计规程

Code for design of residential buildings with prefabricated shear walls

ANSI/NFPA 1194-2013 娱乐性车辆停车场与露营地标准

Standard for Recreational Vehicle Parks and Campgrounds

ANSI/ASTM E2267:2013 独户附联式和独立式住宅性能的规定和评价指南.室内空气质量

Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings - Indoor Air Quality

ASTM E2121-13 在已有的低层住宅建筑中安装氡减缓系统的标准实施规程

5.1 The purpose of the methods, systems, and designs described in this practice is to reduce radiation exposures for occupants of residential buildings caused by radon and its progeny. The goal of mitigation is to maintain reduced radon concentrations in occupiable areas of buildings at levels as low as reasonably achievable. This practice includes sections on reducing radiation exposure caused by radon and its progeny for workers who install and repair radon mitigation systems. The goal for workers is to reduce exposures to radon and its progeny to levels as low as reasonably achievable. 5.2 The methods, systems, designs, and materials described here have been shown to have a high probability of success in mitigating radon in attached and detached residential buildings, three stories or less in height (see EPA, “Radon Reduction Techniques for Existing Detached Houses, Technical Guidance (Third Edition) for Active Soil Depressurization Systems”). Application of these methods does not, however, guarantee reduction of radon levels below any specific level, since performance will vary with site conditions, construction characteristics, weather, and building operation. 5.3 When applying this practice, contractors also shall conform to all applicable local, state, and federal regulations, and laws pertaining to residential building construction, remodeling, and improvement. 1.1 This practice describes methods for reducing radon entry into existing attached and detached residential buildings three stories or less in height. This practice is intended for use by trained, certified or licensed, or both, or otherwise qualified individuals. 1.2 These methods are based on radon mitigation techniques that have been effective in reducing radon levels in a wide range of residential buildings and soil conditions. These fan powered mitigation methods are listed in Appendix X1. More detailed information is contained in references cited throughout this practice. 1.3 This practice is intended to provide radon mitigation contractors with a uniform set of practices that will ensure a high degree of safety and the likelihood of success in retrofitting low rise residential buildings with radon mitigation systems. 1.4 The methods described in this practice apply to currently occupied or formerly occupied residential buildings, including buildings converted or being converted to residential use, as well as residential buildings changed or being changed by addition(s) or alteration(s), or both. The radon reduction activities performed on new dwellings, while under construction, before occupancy, and for up to one year after occupancy, are covered by Guide E1465. 1.5 This practice also is intended as a model set of practices, which can be adopted or modified by state and local jurisdictions, to fulfill objectives of their specific radon contractor certification or licensure programs. Radon mitigation performed in accordance with this practice is considered ordinary repair. ......

Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings

ANSI/ASTM E2136:2013 独户附联式和独立式住宅耐久性规定和性能评价标准指南

Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability

ANSI/ASTM E2156:2013 符合单户附联式住宅和独户式住宅性能标准指南的备选设计、系统和材料的经济性评价标准指南

Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings

ASTM D6946/D6946M-13e1 乳状精炼煤焦油(车道密封物, 随时可用, 基本住宅级)的标准规范

1.1 This specification covers mineral-colloid-stabilized, emulsified refined coal tar suitable for use as a weather-protective and petroleum (aliphatic) solvent resistant coating over bituminous concrete pavements. 1.2 Both products specified are prepackaged ready to use driveway sealers primarily for retail homeowner use. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)

NF P90-512-1:2012 观众设施.第1部分:观众的一般特征

Spectator facilities - Part 1: general characteristics for spectator

ISO 15189:2012 医学实验室.质量和资格要求

This International Standard specifies reduirements for quality and competence in medical laboratories. This International Standard can be used by medicallaboratories in developing theirdquality management systems and assessing their own competence. lt can also be used for confirming or recognizing the competence of medical laboratories by laboratory customers, regulating authorities and accreditation bodies. NOTE International, national or regional regulations or requirements may also apply to specific topics covered in this International Standard.

Medical laboratories - Requirements for quality and competence

DIN EN 13200-1:2012 观众设施.第1部分:观众观看区域的布置规则.规范.德文版本EN 13200-1-2012

Spectator facilities - Part 1: General characteristics for spectator viewing area; German version EN 13200-1:2012

BS ISO 13153:2012 节能型独栋住宅和小型商用建筑设计规程框架

Framework of the design process for energy-saving single-family residential and small commercial buildings