P42 建筑给水、排水工程 标准查询与下载

BS 6283-2:1991 热水系统安全控制装置.第2部分:压力范围从1bar到10bar的温度减压阀规范

Design, construction and testing of temperature relief valves of the automatic reseating type, specifically intended for use with and protection of storage water heaters of the unvented type. Does not give recommendations on application or installation of the valves.

Safety and control devices for use in hot water systems - Specifications for temperature relief valves for pressures from 1 bar to 10 bar

HB 10009-1991 热水和冷水供给

Hot and Cold Water Supply

BS 2456:1990 冷水设备用浮子操作阀的浮子(塑料制品)规范

Requirements for two grades of plastic floats specified in BS 1212.

Specification for floats (plastics) for float operated valves for cold water services

BS 8000-15:1990 建筑工地操作工艺.第15部分:冷热水设施(家用规模)实用规程

Recommendations on basic workmanship. Common Arrangement of Work Section (CAWS) classification S12.

Workmanship on building sites - Code of practice for hot and cold water services (domestic scale)

BOCA APPENDIX C NPC COMM-1990 建设供水配水系统分级

The following is a listing of the standards referenced in this code, the effective date of the standard, the promulgating agency of the standard and the section(s) of this code that refer to the standard.

Sizing the Building Water Supply Distribution System

BOCA ARTICLE 16 NPC-1990 个别供水.第8版

The format and provisions of The BOCA National Propero Maintenance Code are designed to provide units of government with an effective regulatory means of providing minimum health and safety requirements for existing buildings and structures.

Individual Water Supply Eighth Edition

BOCA ARTICLE 16 NPC COMM-1990 个别供水

The provisions requiring that the excavation left when an unfit structure has been removed be filled in is an obvious, but often neglected means of protecting the public health and safety.

Individual Water Supply

BOCA APPENDIX C NPC-1990 建设供水配水系统分级.第8版

Each of the BOCA National Codes is completely updated and published in a new edition every three years. Code change activity is conducted annually within each three-year edition cycle. The first and second year’s approved changes are published in supple

Sizing the Building Water Supply Distribution System Eighth Edition

DIN 4733:1990 装有汽化燃烧器的烧油的洗澡水加热器

This standard applies to flue connected accumulating water heaters with vaporizing burners for EL fuel-oil corresponding to DIN 51603 part 1.

Oil fired bath water heaters with vaporizing burners

ASTM D4472-89(2003) 反渗透系统的记录保持指南

1.1 This guide covers procedures for well-defined recordkeeping of reverse osmosis (RO) systems.1.2 This guide includes a start-up report, recordkeeping of RO operating data, recordkeeping of pretreatment operating data, and a maintenance log.1.3 This guide is applicable to waters including brackish waters and seawaters but is not necessarily applicable to wastewaters.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Recordkeeping for Reverse Osmosis Systems

BS 6880-2:1988 输出功率大于45kW的低温热水加热系统实用规程.设备选择

The types of low temperature hot water heating equipment which are in common use and the selection of such equipment when designing open vented or sealed systems.

Code of practice for low temperature hot water heating systems of output greater than 45 kW - Selection of equipment

BS 6880-1:1988 输出功率大于45kW的低温热水加热系统实用规程.基本原理和设计

Requirements which need to be taken into account in the design of open-vented or sealed systems.

Code of practice for low temperature hot water heating systems of output greater than 45 kW - Fundamental and design considerations

ISO/TR 7024:1985 地上排水 关于安装建筑物内地上系统用硬聚氯乙烯(PVC-U)卫生管道工程的施工和技术建议

Above-ground drainage --Recommended practice and techniques for the installation of unplasticized polyvinyl chloride (PVC-U) sanitary pipework for above-ground systems inside buildings

ASME A112.21.2M-1983 屋面排水

Roof Drains Revision of ANSI A112.21.2-1971

SANS 1200 LD:1982 土木工程施工路段标准规范．第LD节：下水道

This specification covers the general construction requirements for sewerage systems including connecting sewers, manholes, and the like, but excluding sewer rising mains, pump stations, treatment works, and ancillary works. HOTE : The standards referred to in the specification are listed in Appendix A.

Standardized specification for civil engineering construction Section LD: Sewers

CP 342-2-1974 集中热水供应实用规程.第2部分:不同于单个住宅的建筑物

Design, planning, installation, inspection and testing of hot water supply systems in commercial, industrial or multiple dwelling buildings, including district or group schemes. To be read in conjunction with BS 6700:1997

Code of practice for centralized hot water supply. Buildings other than individual dwellings

BS 1329:1974 金属制洗手盆规范

Materials, design, construction and dimensions of basins, Type 'A' rectangular shaped sinking on plan, and 'B' round bowl.

Specification for metal hand rinse basins

JIS A 1705:1976 住宅内设施排水试验方法

Method of test for drainage of equipment units for dwellings

CECS 185-2005（条文说明） 建筑排水中空壁消音硬聚氯乙烯管管道工程技术规程

Technical specification for unplasticized polyvinyl chloride double-wall noise-reducing pipeline engineering of water sewerage in buildings(explanation)

CECS 30-1991 建筑中水设计规范

Code for Design of Reclaimed Water in Buildings