P92 电信设备安装工程 标准查询与下载

YD/T 5076-2005 固定电话交换设备安装工程设计规范

本规范适用于同一电信业务经营者的固定电话网（含本地网和长途网以及不同电信业务经营者的电话网间互通）新建电话交换设备的安装工程设计。扩建、改建工程设计在充分考虑原有设备的特点、合理利用原有设施的基础上，参照执行本规范。

Design Specification for PSTN Exchange Installation Engineering

YD/T 5077-2005 固定电话交换设备安装工程验收规范

本规范是固定电话网交换设备安装工程中进行施工质量 检查、阶段验收以及竣工验收等工作的技术依据，对于其它网交换设备安装工程可参照执行。

Accepting Specification for PSTN Exchange Installation Engineering

YD/T 5033-2005 会议电视系统工程验收规范

本规范是会议电视系统安装工程中进行施工质量检查、阶段验收以及竣工验收等工作的技术依据。

Acceptance Specifications of Videoconference System Engineering

YD/T 5032-2005 会议电视系统工程设计规范

本规范适用于基于ITU-T H.320标准和设置专用会议室的会议电视系统的新建工程。改、扩建工程可参照执行。专用会议电视用户进入会议电视网时，应遵守本设计规范的各项规定。

Code for Design of Videoconference System Engineering

YD/T 5053-2005 电话网网管系统工程设计规范

本规范适用于固定电话网（包括本地电话网和长途电话网）网管系统工程设计，其他网管工程设计可以参照执行。

Specifications of Engineering Design for Telephone Network Management System

GJB 5465-2005 指挥所显示控制系统通用要求

本标准规定了指挥所显示控制系统（以下简称显控系统）的基本组成、功能要求、性能要求和显控系统安装环境要求。 本标准适用于固定指挥所显控系统的设计、安装。

General requirements for the display and control system in the headquarters

NF C90-402-3:2005 家用和建筑物电子系统(HBES).第2-3部分:系统综述.集成于HBES中的产品的一般功能安全要求

Home and Building Electronic Systems (HBES) - Part 2-3 : system overview - General functional safety requirements for products intented to be integrated in HBES.

YD/T 1363.1-2005 通信局(站)电源、空调及环境集中监控管理系统.第1部分:系统技术要求

本部分规定了通信局(站)电源、空调及环境集中监控管理系统的系统组成、监控内容、系统管理、硬件配置、软件功能和系统维护等要求。 本部分适用于各类通信局(站)单独设置的通信电源、空调及环境集中监控管理系统以及以此为基础构成的不同规模的监控系统网络。

Specification of supervision system for power, air conditioner and environment Part 1: Generic specification

DIN EN 50090-5-1:2005 家用和建筑物用电子系统(HBES).第5-1部分:介质和介质相关层.1类HBES用输电线

This European Standard defines the mandatory and optional requirements for the medium specific Physical and Data Link Layer of Power Line Class 1 in its two variations PL110 and PL132.Data Link Layer interface and general definitions, which are medium independent, are given in EN 50090 4-1.

Home and Building Electronic Systems (HBES) - Part 5-1: Media and media dependent layers - Power line for HBES Class 1; German version EN 50090-5-1:2005, text English

CECS 177-2005 城市地下通信塑料管道工程施工及验收规范

本规范适用于新建、扩建、改建城市地下通信塑料管道工程的施工及验收。

Code for construction and acceptance of buried telecommunication plastic conduit engineering in city area

BS DD CLC/TS 50433:2005 所有25 Mbit/s及以上宽带的铺设指南

This paper globally addresses generalisation of optical fibre throughout metropolitan edge and

Guidelines for paving the way for broadband "Broadband, 25 Mbit/s and more for All"

BS EN ISO 16484-3:2005 建筑物自动化和控制系统(BACS).功能

ISO 16484-3:2005 specifies the requirements for the overall functionality and engineering services to achieve building automation and control systems. It defines terms, which shall be used for specifications and it gives guidelines for the functional documentation of project/application specific systems. It provides a sample template for documentation of plant/application specific functions, called BACS points list. The informative function block examples explain a method to display the referenced functions in system documentation; they do not standardize the method for programming functions and applications. ISO 16484-3:2005 covers requirements and definitions regarding BACS and application software, generic functions for plant/project specific applications and engineering functions for building controls and operations. It provides communication functions for the integration of other dedicated special system processes. ISO 16484-3:2005 defines a method for specifying the procurement specifications containing all essential elements required for the operational functioning of a BACS. The successful installation and operation of a BACS requires that its procurement be based on a complete and accurate functional specification.

Building automation and control systems (BACS) - Functions

ISO 16484-3:2005 建筑自动化和控制系统(BACS).第3部分:功能

This Part 3 of the standard specifies the requirements for the overall functionality and engineering services to achieve building automation and control systems. It defines terms, which shall be used for specifications and it gives guidelines for the functional documentation of project/application specific systems. It provides a sample template for documentation of plant/application specific functions, called BACS points list in annex A. The informative function block examples explain a method to display the referenced functions in system documentation; they do not standardize the method for programming functions and applications. This part of the standard covers the following: Requirements and definitions regarding BACS and application software, generic functions for plant/project specific applications and engineering functions for building controls and operations. It provides communication functions for the integration of other dedicated special system processes. The functional requirements in this part of the standard are subdivided as follows:  System management and application software: describes the requirements for plant independent systems and human system interface programs related to a project, including the operating system. This standard does not dedicate the following system functionality to any particular hardware, e.g.:  system diagnostics, watchdog, redundancy, time keeping, access control, log lists;  point identification, event message handling, print control;  database, statistics, data archiving, remote access;  system communications.  Human system interface (HSI), point information presentation, graphics, alarms, time scheduling.  Engineering process and tool software: describes the requirements for configuring of the hardware and control strategies, the system management and the commissioning process.  BACS application processing programs and plant/application specific functions: describes the requirements for plant, application and/or project specific functions and a method for the documentation of a project. The functions are subdivided into the following types:  input and output functions, physical and shared;  processing functions (e.g. for monitoring, interlocks, control and optimization);  management functions (system programs), and required communications;  operator functions. This Part 3 defines a method for specifying the procurement specifications containing all essential elements required for the operational functioning of a BACS. The successful installation and operation of a BACS requires that its procurement be based on a complete and accurate functional specification. The standard provides a template called the ‘BACS points list’ that can be found in annex A (normative). Its purpose is to determine and document the options for plant/application specific functionality based on the plant/control schematic. Further explanations can be given in form of plant/control descriptions and control flow chart diagrams. Examples are given in annex B (informative). The exact specifications will be project-specific. Information about the standardized functions is given in the form of informative examples as function-blocks, textual, and graphical descriptions in 5.5. It is recognized, that functions can be described and implemented in many different ways, depending on:  climatic differences;  cultural and regional differences;  national regulations.

Building automation and control systems (BACS) - Part 3: Functions

DIN EN ISO 16484-2:2004 建筑物自动化和控制系统.第2部分:硬件

This Standard specifies requirements of hardware for products and systems for the control and management of the HVAC processes (Building Control and Automation System BACS), and provides for the integration of non HVAC processes.#,,#

Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004); German version EN ISO 16484-2:2004

YD/T 1323-2004 接入网技术要求—不对称数字用户线（ADSL）

Access Network Technical Requirements - Asymmetric Digital Subscriber Line (ADSL)

DIN EN 50090-7-1:2004 家用和建筑物用电子系统(HBES).第7-1部分:系统管理.管理规程

Home and Building Electronic Systems (HBES) - Part 7-1: System management - Management procedures; German version EN 50090-7-1:2004, text English

DIN EN 50090-3-2:2004 家用和建筑物用电子系统(HBES).第3-2部分:使用方面.1类HBES的用户说明

This part of EN 50090 specifies the structure and functioning of servers for the objects which form the interface between the application layer and the application and management.

Home and Building Electronic Systems (HBES) - Part 3-2: Aspects of application - User process for HBES Class 1; German version EN 50090-3-2:2004, text English

DIN EN 50090-5-2:2004 家用和建筑物用电子系统(HBES).第5-2部分:介质和介质相关层.基于HBES1类的双扭线网络

This European Standard defines the requirements for the medium specific physical and data link layer for HBES Class 1 Twisted Pair in its two variations called TP0 and TP1.

Home and Building Electronic Systems (HBES) - Part 5-2: Media and media dependent layers - Network based on HBES Class 1, Twisted Pair; German version EN 50090-5-2:2004, text English

BS EN ISO 16484-2:2004 建筑物自动化和控制系统.硬件

ISO 16484-2:2004 specifies the requirements for the hardware to perform the tasks within a building automation and control system (BACS). It provides the terms, definitions and abbreviations for the understanding of ISO 16484-2 and ISO 16484-3. ISO 16484-2:2004 relates only to physical items/devices, i.e. devices for management functions, operator stations and other human system interface devices; controllers, automation stations and application specific controllers; field devices and their interfaces; cabling and interconnection of devices; engineering and commissioning tools. ISO 16484-2:2004 shows a generic system model to which all different types of BACS and their interconnections (BACS network) can fit. A graphical concept of the BACS network in terms of LAN topology will be provided in ISO 16484-5.

Building automation and control systems (BACS) - Hardware

NF C90-409-1*NF EN 50090-9-1:2004 家用和建筑物电子系统(HBES).第9-1部分:安装要求.HBES 1级绞线的通用电缆

Home and Building Electronic Systems (HBES) - Part 9-1 : installation requirements - Generic cabling for HBES Class 1 twisted pair.