Q14 混凝土制品 标准查询与下载

PNST 61-2015 基于纳米结构粘合剂的泡沫混凝土保温砌块. 规格

Foamed concrete thermoinsulating blocks based on nanostructured binder. Specifications

GOST R 56703-2015 基于水泥粘合剂的建筑物深层防水毛细管干混. 规格

Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications

GOST 12504-2015 住宅和公共建筑物用混凝土和钢筋混凝土内墙板. 通用规格

Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications

GOST R 56686-2015 基于水泥粘合的使用陶粒砂的构筑物灰泥干混. 规格

Dry construction plaster mixes based on cement binder with use of ceramsite sand. Specifications

GOST 26434-2015 住宅建筑物地板用钢筋混凝土板. 类型和基准参数

Reinforced concrete panels for floors in residential buildings. Types and basic parameters

JC/T 2238-2014 水泥制品用矿渣粉应用技术规程

本标准规定了矿渣粉在水泥制品生产中作为混凝土掺合料替代部分水泥使用时的术语和定义、进货要求、运输和贮存以及工艺技术要求。本标准适用于矿渣粉在钢筋混凝土排水管、预应力混凝土管、预应力钢筒混凝土管、环形混凝土电杆、先张法预应力混凝土管桩等水泥制品生产中使用的技术规定。矿渣粉在其他水泥制品生产中使用时也可参照执行。

Technical specification for application of slag powder used for cement product

JC/T 2239-2014 预应力离心混凝土空心方桩用端板

本标准规定了预应力离心混凝土空心方桩用端板的术语和定义、规格和标记、要求、试验方法、检验规则、标志和产品合格证以及贮存、包装和运输。本标准适用于预应力离心混凝土空心方桩用端板(以下简称端板)。

End plate for precast prestressed spun concrete square piles

JC/T 2240-2014 地面辐射供暖绝热层用泡沫混凝土

本标准规定了地面辐射供暖绝热层用泡沫混凝土的术语和定义、分类和标记、原材料、要求、试验方法、制造和运输、检验规则和产品合格证。本标准适用于民用建筑现场浇注的地面辐射供暖绝热层用泡沫混凝土。

Foamed concrete used for floor radiant heating course

JC/T 2280-2014 内衬PVC片材混凝土和钢筋混凝土排水管

本标准规定了内衬PVC片材混凝土和钢筋混凝土排水管的术语和定义、产品分类、原材料、技术要求、试验方法、检验规则、标志、包装、运输和贮存以及出厂证明书。本标准适用于采用GB/T 11836和JC/T 640所述成型工艺生产的内衬PVC片材混凝土和钢筋混凝土排水管。本标准适用于雨水、污水、引水及农田排灌等重力流管道的管子,尤其适用于输送腐蚀性介质管道的管子。生产其他用途的内衬PVC片材混凝土和钢筋混凝土排水管,可由供需双方协商,并参照本标准执行。按本标准生产的管子适用于开槽施工、顶进施工及其他施工方法。

PVC lining concrete and reinforced concrete sewer pipe

JC/T 947-2014 先张法预应力混凝土管桩用端板

本标准规定了先张法预应力混凝土管桩用端板的术语和定义、规格和标记、技术要求、试验方法、检验规则、标志和产品合格证以及包装、运输和贮存。本标准适用于先张法预应力混凝土管桩用的端板。先张法预应力离心混凝土异型桩用的端板可参照执行。

End plate for pretensioned spun concrete piles

JC/T 2236-2014 预应力高强混凝土桩用硅砂粉应用技术规程

本标准规定了硅砂粉在预应力高强混凝土桩生产中作为混凝土掺合料替代部分水泥使用的术语和定义、进货要求、运输和储存以及工艺技术要求。本标准适用于采用蒸压养护工艺时硅砂粉在预应力高强混凝土桩生产中使用的技术规定。硅砂粉在其他混凝土制品生产中使用时也可参照执行。

Technical specification for application of ground silica sand used for prestressed high-strength concrete piles

JGJ/T 323-2014 自保温混凝土复合砌块墙体应用技术规程

Technical specification for the application of self-insulating concrete composite block walls

JIS A 5422:2014 纤维增强水泥墙板

Fiber reinforced cement sidings

DIN CEN/TR 16563:2014 等效耐久性规程原则.英文版本CEN/TR 16563-2013

Principles of the equivalent durability procedure; English version CEN/TR 16563:2013

KS F 2566-2014 纤维增强混凝土弯曲强度试验方法

이 표준은 3등분점 하중에 의한 섬유 보강 콘크리트 및 섬유 보강 숏크리트의 휨성능 시험방법에 대하여 규정한다.

Standard test method for flexural performance of fiber reinforced concrete

DIN 19695:2014 混凝土管和混凝土管、管件及预应力混凝土管检查井的运输和储存

Transport and storage of pipes, fittings and prefabricated manhole components made of concrete and steel reinforced concrete

ASTM C506-14 钢筋混凝土制拱形排水管, 雨水管和污水管的标准规范

1.1 This specification covers reinforced arch-shaped concrete pipe to be used for the conveyance of sewage, industrial wastes, storm water, and for the construction of culverts. 1.2 This specification is the inch-pound companion to C506M; therefore, no SI equivalents are presented in the specification.Note 1—This specification is a manufacturing and purchase specification only, and does not include requirements for bedding, backfill, or the relationship between field load condition and the strength classification of pipe. However, experience has shown that the successful performance of this product depends upon the proper selection of the class of pipe, type of bedding and backfill, and care that the installation conforms to the construction specifications. The owner of the reinforced concrete pipe specified herein is cautioned that he must correlate the field requirements with the class of pipe specified and provide inspection at the construction site.

Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe

ASTM C655M-14 钢筋混凝土D型承重涵洞、雨水道和污水管的标准规格(公制)

1.1 This specification covers reinforced concrete pipe designed for specific D-loads and intended to be used for the conveyance of sewage, industrial wastes, and storm water and for the construction of culverts. 1.2 This specification is the metric counterpart of Specification C655. Note 1—Experience has shown that the successful performance of this product depends upon the proper selection of the pipe strength, the type of bedding and backfill, the care that the installation conforms to the construction specifications, and provision for adequate inspection at the construction site. This specification does not include requirements for bedding, backfill, the relationship between field load conditions and the strength designation of pipe, or durability under unusual environmental conditions. These requirements should be included in the project specification.

Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe 40;Metric41;

ASTM C76M-14 钢筋混凝土制涵洞、雨水道和污水管的标准规格(公制)

1.1 This specification covers reinforced concrete pipe intended to be used for the conveyance of sewage, industrial wastes, and storm water, and for the construction of culverts. 1.2 This specification is the SI companion to Specification C76. Note 1—This specification is a manufacturing and purchase specification only, and does not include requirements for bedding, backfill, or the relationship between field load condition and the strength classification of pipe. However, experience has shown that the successful performance of this product depends upon the proper selection of the class of pipe, type of bedding and backfill, controlled manufacture in the plant, and care and installation conforms to the construction specifications. The owner of the reinforced concrete pipe specified herein is cautioned that he must correlate the field requirements with the class of pipe specified and provide inspection at the construction site.Note 2—Attention is called to the specification for reinforced concrete D-load culvert, storm drain, and sewer pipe (ASTM Designation C655M).

Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe 40;Metric41;

ASTM C361-14a 钢筋混凝土低水头压力管的标准规格(公制)

1.1 This specification covers reinforced concrete pipe intended to be used for the construction of pressure pipelines with low internal hydrostatic heads generally not exceeding 125 ft. 1.2 This specification is the inch-pound companion to Specification C361; therefore, no SI equivalents are presented in the specification.Note 1—Field tests on completed portions of the pipeline are not covered by this specification for the manufacture of the pipe but should be included in specifications for pipe laying.

Standard Specification for Reinforced Concrete Low-Head Pressure Pipe